Distributed by any reference to raytheon or rtn in this manual should be interpreted as raymarine. The names raytheon and rtn are owned by the raytheon company..
Linear rudder position sensor installation guide document number: 81006-3 date: may 2001 81006_3.Book page 1 tuesday, may 22, 2001 1:03 pm.
2 linear rudder position sensor important information safety notices warning: product installation this equipment must be installed and operated in accordance with the instructions contained in this handbook. Failure to do so could result in poor product performance, personal injury and/or damage to...
Installation guide 3 introduction product description the linear rudder position sensor (part number: m81188) is designed for ‘bullhorn’ style hydraulic outboard steering systems. It is totally weatherproof and designed to be mounted on the bullhorn ram. It transmits the precise position of the boat...
4 linear rudder position sensor mounting 1. Use the steering system to position the bullhorn ram amidships. 2. If necessary, release the hydraulic pressure from the boat’s hydraulic steering system note: contact your steering gear manufacture for advice on this step, and follow their instructions fo...
Installation guide 5 10. Tighten the hose clamps around the bullhorn ram and the rudder sensor’s barrel. 11. Tighten the starboard bullhorn bolt to secure the u-bracket. 12. Fit and tighten the supplied nut and washer to secure the threaded rod end of the sensor’s shaft to the u-bracket. Notes: 1. I...
6 linear rudder position sensor 81006_3.Book page 6 tuesday, may 22, 2001 1:03 pm.
Raymarine emc guidelines emc installation & service guidelines important note all raymarine equipment and accessories are designed to the best industry standards for use in the leisure marine environment. When powered up, all electrical equipment produces electromagnetic fields. These can cause adja...
Raymarine emc guidelines • raymarine specified cables are used at all times. Cutting and rejoining these cables can compromise emc performance and so must be avoided unless doing so is detailed in the installation manual. • if a suppression ferrite is attached to a cable, this ferrite should not be ...
Document number: 84064-8 april 2001 limited warranty certificate raymarine warrants each new light marine/dealer distributor product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 ye...
Factory service centers united states of america uk, europe, middle east, far east raymarine inc 22 cotton road, unit d nashua, nh 03063-4219, usa raymarine ltd anchorage park, portsmouth po3 5td, england telephone: +1 603 881 5200 fax: +1 603 864 4756 www.Raymarine.Com telephone: +44 (0)23 9269 361...
