Raymarine ST40 Quick Reference Manual - page 2
Adjusting display backlighting/contrast
Normal operation
ST40 Bidata Instrument - quick reference guide
or
To exit adjust mode press
or wait for 5 second timeout
LEVEL 1
LEVEL 1
OFF
LEVEL 2
LEVEL 3
LEVEL 2
To enter adjust mode, press for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST
SWITCH ON
Last permanent
screen is displayed
SPEED
DEPTH
Current
speed
3 seconds
Reset
Maximum
speed
3 seconds
Reset
Average
speed
Water
Temp.
Log
Trip
3 seconds
Reset
Depth
Minimum
depth
Shallow
alarm
Deep
alarm
Deep
anchor
alarm
Offset
Shallow
anchor
alarm
3 seconds
Alarm on/off
3 seconds
Alarm on/off
Set
alarm
level
3 seconds
Alarm on/off
3 seconds
Alarm on/off
+
-
Notes:
* denotes temporary screens
which will time-out to the previous
permanent screen after 5 seconds.
On repeater instruments, only the
Speed
,
Water temperature
,
Depth
and
Minimum depth
screens are available.
With Set alarm level screen displayed,
to save the alarm level and return to
normal operation.
and
keys simultaneously
press the
86048_2.p65
18/04/01, 16:35
1