Raymarine ST60+ Quick Start Manual - page 2
Cr
op
Crop
Crop
Cr
op
Crop
Crop
Crop
Crop
Fo
ld
Fold
Fold
Fold
GRAPHIC
Selects the required CHAPTER.
When resettable data are
displayed, hold down for 3
seconds to reset the data to
the current value.
When an adjustable value is
displayed, press to increase
the value.
RESET
Gives access to track
mode. In track mode you
can:
- Hold down for 1 second
to advance to the next
waypoint.
- Press to leave track
mode.
When an adjustable
value is displayed, press
to decrease the value.
TRACK
Selects the required
PAGE.
D8496-1
Also gives access to backlight
adjust, contrast adjust and
power on/off modes (see
overleaf).
+
TRACK
RESET
To select a chapter
To select a page
momentary
press, to step
forward
1 sec press, to
step back
momentary
press, to step
forward
1 sec press, to
step back
SATS
HDOP
Depth graph
Speed graph
True wind speed graph
Apparent wind angle graph
Ground wind angle graph
Apparent wind speed graph
True wind angle graph
Heading graph
Sea temperature graph
Battery voltage graph
VMG Windward
Maximum speed
Minimum depth
Maximum depth
True wind dir. over ground
Beaufort wind force
Cardinal wind direction
Tack heading
DMG
CMG
FAVORITE
Favorite page 5
Favorite page 4
Favorite page 7
Favorite page 6
Favorite page 3
Favorite page 2
Favorite page 1
Current depth
DEPTH
Speed
Speed
Average speed
Log
Trip log
SOG
SOG
Timer
SPEED
WIND
Apparent wind speed
True wind speed
Apparent wind angle
True wind angle (sail)
COG
Locked heading
Current heading
Heading
COG
HEADING
NAVIGATE
BTW (bearing to waypoint)
DTW (distance to waypoint)
Speed
Rolling road
VMG to waypoint
LAT(itude)
COG (course over ground)
COG (course over ground)
BTW (bearing to waypoint)
COG
Heading
SOG
XTE (cross track error)
LON(gitude)
SOG (speed over ground)
Waypoint number
Waypoint name
ENVIRONMENT
Sea temperature
Battery voltage
Date
Time
Pilot status
Rudder angle
AUTOPILOT
Note: AUTOPILOT
chapter available only
if a Raymarine
autopilot system is
connected to SeaTalk
D8497-1
2. Enter Favorite set up
+
3. Select the required
page
format
Single element
Dual
element
Triple element
Quad
element
4. Highlight the line you want to set up
MND 7.5
FA
7.5
FA
RUD 10
o
3/3/03
DATE
MXD
5. Select the required data in the highlighted line
1. Select required Favorite page
2 seconds
TRACK
RESET
RESET
RESET
RESET
RESET
TRACK
TRACK
TRACK
1
D8498-1
General operation
Selecting chapters & pages
Seting up Favorite pages