Rio Mobility Firefly User Manual - Power
Firefly
TM
User Manual
www.riomobility.com
15
FireflyControls
8. Firefly
TM
Controls
Refer to the diagram on page 5 for part names and locations.
Power
To operate the Firefly
TM
, the power must be
turned on in two locations. The first is a red
switch on the right side of the
Battery
. The
other is a red switch on the indicator, next to the
Speedometer
on the
Handlebar
. Both switches
must be in the ON position for the Firefly
TM
to
function.
Brakes
There are two lever
Brakes
, one on each side of the
Handlebar
. Each Brake acts both
mechanically -- via bicycle-standard caliper brakes at the wheel -- and electrically -- by turning off
the power to the Hub Motor. NOTE: when travelling uphill, you must fully release the Brakes to
allow the Hub Motor to engage.
Each brake also offers the functionality of a Parking Brake to hold the Brake in the engaged
position. This is operated as shown on page 8.
Drive
To drive the Firefly
TM
, place both hands on the
Handlebar
, fingers within easy reach of the Brakes.
Twist the
Throttle
with your right hand. The amount of twist will control your speed. Steer by
pushing left or right on the Handlebar according to the direction intended.
The Firefly
TM
includes a
Speedometer
display on the Handlebar to record speed and distance
traveled. A separate user manual is included.
Reverse
To enhance maneuverability, the Firefly
TM
may be driven in reverse. To engage, you MUST first come
to a complete stop. Then press and hold the red
Reverse
button on the left side of the handle
while twisting the
Throttle
. Use caution and ensure that there is a clear path before moving. To
travel in the forward direction again, you MUST first come to a complete stop. If you do not stop
first, the Firefly
TM
will continue to travel in the same direction, even though the button has been
released.
Headlight
It is recommended to use the
Headlight
in low-light conditions to improve your visibilty, both of
your environment and to others. To turn the Headlight on, press the yellow button next to the
Reverse button. To turn it off, press the yellow button again.