RIOTEC iDC9602A Quick manual - page 3
3
There are two operating modes on the scanner
1. Direct-scan Mode
1. select Direct-scan
2a. BT connected, begin to
scan the barcodes
MAIN>
S 12:52
Direct-scan
Memory-scan
Upload
↑
ENTER
↓
D>
S 12:52
ESC
SCAN
MAIN
2b. BT is disconnected.
D>
S 12:52
Off line !!!
…Linking!
ESC
SCAN
MAIN
If BT is disconnected, please back to
page #2 and do the pairing procedure
again.
2. Memory-scan Mode
1. select Memory-scan
2. begin to scan the barcodes
MAIN>
S 12:52
Direct-scan
Memory-scan
Upload
↑
ENTER
↓
M>
S 12:52
ESC
SCAN
MAIN
Under Memory-scan mode, enable/disable “Quantity
entry” function
Disable “Quantity entry” (default)
1. disable “Quantity entry”
Setting code
2. begin the scan the barcodes
M>
S 12:52
ESC
SCAN
MAIN
3. press DEL to delete the last
barcode data
4. be sure that you want to
delete the last barcode.
M>
S 12:52
1234567
ESC
SCAN
DEL
M>
S 12:52
The last code
Will be deleted !
Are you sure ?
NO
YES
Enable “Quantity Entry” function,
decide the order of the output data to your device first
1. Q’ty first, then, barcode
2. Barcode first, then, Q’ty
3. Enable “Quantity Entry”
Setting code
4. begin the scan the barcodes
M>
S 12:52
SCAN:
Q’ty: 000
ESC
SCAN
ENTER
When “Quantity Entry” is enabled, decide how to type-in
the number.
By button (default)
By scanning the number code
C1. enable
D1. enable
C2. scan the barcode
D2. scan the barcodes
M>
S 12:52
SCAN:
Q’ty: 1
ESC
SCAN
ENTER
M>
S 12:52
Q’ty: 1
ESC
SCAN
ENTER
C3. Press theENTER to type the q’ty D3. Press theENTER to type the q’ty
M>
S 12:52
1234567
Q’ty: 1
ESC
SCAN
ENTER
M>
S 12:52
7654321
Q’ty: 1
ESC
SCAN
ENTER
C4. press ↓ to choose number, then,
pressENTER to confirm
D4. scan numeric code (page #5)
M>
S 12:52
Q’ty: 5---
ESC
ENTER
↓
M>
S 12:52
Q’ty: 5---
ESC
ENTER
5. Then,scan the next barcode
5. end by X code, then,
be ready to scan the next
M>
S 12:52
SCAN:
Q’ty: 1
ESC
SCAN
ENTER
M>
S 12:52
SCAN:
Q’ty: 1
ESC
SCAN
ENTER
Upload data (Memory-scan)
1. press ESC, select Upload
2. BT connected, press
START to send data
MAIN>
S 12:52
Direct-scan
Memory-scan
Upload
↑
ENTER
↓
U>
S 12:52
Push START key
to send data…
ESC
START MAIN
3. After data upload, press
ERASE to delete memory data
4. be sure that you want to delete
memory data.
U>
S 12:52
ESC
SPEED ERASE
U/E>
S 12:52
Data in memory
Will be erased!
Are you sure?
NO
YES
5. After you delete the memory data, it will be back to MAIN MENU
Switch from Memory-scan to Direct-scan mode
1. switch Memory-scan to
Direct-scan mode
2. must delete all data in the
memory
D>
S 12:52
Data in memory
will be erased!
NO
YES
Erasing…
Completed!!!
3. begin to scan the barcode
D>
S 12:52
ESC
SCAN
MAIN
Power-saving Mode
1. Main MENU
2. select Setup
MAIN>
S 12:52
Direct-scan
Memory-scan
Upload
↑
ENTER
↓
MAIN>
S 12:52
Memory-scan
Upload
Setup
↑
ENTER
↓
3. select Sleep time
4. press ↓, decide the time to
enter sleeping mode
S>
S 12:52
BT setup
Sleep time
Output Speed
ESC
ENTER
↓
S/P/S>
S 12:52
Sleep time
00
ESC
ENTER
↓
* When charging, the scanner will not enter power-saving mode automatically.