RIOTEC RIOSCAN iLS6300FS Quick Manual - page 4
4
Keyboard Country
(Wired OTG mode only)
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States
:
@ | $ # { } [ ] = / ‘ \ ~
USA
(Original setting)
Italian
Norway
France
Germany
Vietnam
Sweden
Spain
Denmark
Portugal
Switzerland
Hungary
PCB material board with 3 fixed screws.
1. Make sure your micro USB cable is ready.
User can adjust micro USB cable to the right channel based on the
location & direction of micro USB port on the smartphone.
2. Lock PCB material board on the top cover by 3 screws
3. There are another 3 fixed screws on the PCB material board.
Aiming at fixed screws put holder on them pull down
and left
for locking
(The transparent acrylic board is for reference only)
1. The holder is stuck on the top cover by 3 fixed screws.
2.
Put smartphone onto holder. It will use PU glue & suction cup to fix
smartphone. And, user can plug micro USB cable to
smartphone. Then, user can begin to do the BT pairing or wired
connection.
3.
When the pairing is completed, the data you scan will be sent to
smartphone easily.
Holder
PCB material board
with 3 fixed screws.
Holder-back side
(for top cover)
Holder-front side
(for smartphone)