Agility 2-way wireless slim keypad model model model modelssss: rw132kl1 : rw132kl1 : rw132kl1 : rw132kl1, , , , rw132kl1p rw132kl1p rw132kl1p rw132kl1p instruction manual instruction manual instruction manual instruction manual.
Agility 2 agility 2 agility 2 agility 2----way wireless slim way wireless slim way wireless slim way wireless slim outdoor outdoor outdoor outdoor keypad keypad keypad keypad table of contents table of contents table of contents table of contents introduction 3 m ain f eatures 3 communication setup ...
3 introduction the agility version-3-compatible 2-way wireless slim keypad comes in two models: rw132kl1p—a black protection-insulated outdoor model empowered with a proximity reader rw132k1 — a white indoor model operates in either of two modes: • full function mode: wireless led operating keypad •...
4 * note : adding the keypad to the system can be done remotely using the configuration software. Mounting the keypad note : before mounting the keypad, test the keypad communication with the system. To mount the keypad on the wall using the supplied mounting bracket. 1. Remove locking pin securing ...
5 full-function mode user operations the following list details the user operations from the 2-way wireless slim keypad in a full functional mode. User operation can be defined to be activated by a quick mode or high security mode that requires the use of a code or (1p model) proximity tag. In the h...
6 select the volume level (0=no sound, 4=full volume) press to save your selection set keypad exit/entry beeps press the button for 2 seconds to toggle between on/off activate/deactivate light sensor 4 press the button for 2 seconds to toggle between on/off status request press the button for 2 seco...
7 bypass unit mode for units configured by engineers as being in bypass mode, the actions keys are disabled and the keypad is used only to authorize an opening of an exit/entry door. The following explanation details the user operations from the 2-way wireless slim outdoor keypad in bypass unit mode...
8 4. Pull out the batteries and replace them with new ones. Pay attention to the polarity when inserting the new batteries. 5. Close the case and secure the screw to its place. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to local regula...
9 using the proximity tag (1p model only) the proximity tag is correctly used by applying it within a 2 cm (two centimeter) distance from the key, as shown at right. Technical specification electrical battery type cr123, 3v lithium battery (x 2) current consumption stand by current 10µa, max current...
10 rtte compliance statement hereby, risco group declares that this equipment is in compliance with the essential requirements and other relevant provisions of directive 1999/5/ec. For the ce declaration of conformity please refer to our website: www.Riscogroup.Com . Risco group limited warranty ris...
11 contacting risco group risco group is committed to customer service and product support. You can contact us through our website www.Riscogroup.Com or as follows: united kingdom tel: +44-(0)-161-655-5500 e-mail: support-uk@riscogroup.Com brazil tel: +55-11-3661-8767 e-mail: support-br@riscogroup.C...
