Rise RXS255 Instruction Manual - General Settings
8
At the end of the wizard is the screen to be used to set the motor arming procedure.
The recommended setting is Yaw Right which requires the yaw control to be held
to the right while the throttle is at 0 for 3 seconds to arm the motors. Holding the
Yaw control to the left will
disarm the motors. There are
several other options
available for arming/
stopping the motors including
using a switch assigned to
Channel 6.
After the Arming Setting is
completed, the settings need
to be saved to the flight
controller.
GENERAL SETTINGS
Any time the controller is
connected to the app, the
following settings should
be checked.
a. Vehicle Configuration
Screen – The Motor Output
Channels should have
matching Channels.
b. Attitude Configuration
Screen – The Roll, Pitch and
Yaw settings should be “0”.
The Altimeters setting should
be 0.10.