Risest Technology MVS01 User Manual - page 5
* Short press “MENU” to enter into FM mode options, including channel search, automatic search
and manual search.
* In channel search mode, we can choose radio station. Short press "VOL-/|>|" key to
choose a radio station, short press "OK" button to save the current radio station.
* In automatic search mode, short press "OK" button to search radio station automatically, during
searching, all buttons are not active.
* In manual search mode, we can set frequency manually. Short press "VOL-/|>|"
button to decrease or add frequency, short press "OK" button to save the current radio frequency
setting.
Second function mode:
* Short press "VOL-/|>|" button to adjust the volume.
* Short press “OK” button to mute.
General operation:
* Short press "ESC" to exit radio function and go back to the main interface
4.5 Audio input
Insert audio line into “LINE-IN” port, and it can be used as external speaker.
* Short press "VOL-/|>|" button to adjust the volume.
* Short press “OK” button to mute.
4.6 Video/ Audio record
After enter the recording mode, press “OK” button, a message box is showed on screen to ask
whether or not stop.
After enter the recording mode, press “ESC” button, enter the clock display interface, the recording
is not stopped.
In clock display interface, press “VOL-/|>|” for 3 seconds, return to video/ audio
recording interface, the recording is not stopped.
In clock display interface, press “ESC” button, save the recording, exit to main interface, recording
is stopped.
When the automatic record mode is set, the system will enter clock display interface and then start
recording automatically if there is no operation in the main interface. When the hidden record mode
is set, the clock will be showed automatically after starting video/audio recording for 10 seconds,
while there is a “dot” display on the right up screen, it means that video/audio recording is on, “blue
dot” indicates video recording, “yellow dot” means audio recording, “||” indicates that recording
stops, it will go back to security interface when press “VOL-/|>|” for 3 seconds.
4.7 Webcam operation
The webcam driver should be installed in the PC then the webcam function will be active. when
connecting it to the computer with USB cable, it start webcam function. And it will return to main
interface when USB cable is unconnected.
4.8 Operation of connect computer
In main interface, connect it to computer with USB cable, it will come into MSDC mode (USB
Mode) automatically.
4.9 Charge
This product can be charged through USB port, when the charger is connected through USB cable, it
will recharge automatically.
4.10 Clock display