- DL manuals
- Riso
- Disc Duplicator
- RZ200AW
- User Manual
Riso RZ200AW User Manual - Appendixes
Optional Accessories
98
Appendixes
Optional Accessories
A variety of optional accessories are available to enhance the capabilities of the machine.
For details about the optional accessories, see their respective user's manuals.
z
Color Cylinder(Drum)
A variety of colors are available, such as blue, red, green, and brown. Store a cylinder(drum) in its own case.
z
Auto Document Feeder AF-V
Feeds up to 50 sheets of originals automatically.
z
Job Separator IV:N
With the Programmed Printing function, allows the machine to print and sort into groups separated by tape.
z
Key Card Counter IV:N
With a single button press, shows the numbers of printed copies and consumed masters within a given period of
time. This can help you manage costs.
z
Special Paper Feed Kit
Use for thick paper such as cards and envelops. Replace with this unit when thick paper needs to pass through
the machine.
z
Stand
z
Printer Control Board RISORINC3N
Use to connect a computer to the machine using a parallel cable.
z
RISO PRINTER Network Interface Card RISORINC-NET
Use to directly connect the machine to the network.
This comes with the RISO-MONITOR software that allows you to check the status of the machine from computers.
Appendixes
Specifications
99
Specifications
RISO RZ390
Note:
• The specifications are subject to change without prior notice.
Master-making/printing methods
High-speed digital master-making/full automatic stencil printing
Original Type
Book (22lb(10 kg) or less), sheet
Original Size (max./min.)
When using the Stage Glass : 1
15
/
16
"
×
3
9
/
16
" (50mm
×
90mm) - 11
11
/
16
"
×
17" (297mm
×
432mm)
When using the ADF unit (option) : 3
9
/
16
"
×
5
1
/
2
" (90mm
×
140mm) - 11
11
/
16
"
×
17" (297mm
×
432mm)
Original Paper Weight
When using the Stage Glass : 22lb (10 kg) or less
When using the ADF unit (option) : 15-lb bond (50g/m
2
) - 28-lb bond (110g/m
2)
Print Paper Size (max./min.)
3
15
/
16
"
×
5
13
/
16
" (100mm
×
148mm) - 11
11
/
16
"
×
17" (297mm
×
432mm)
Paper Supply Capacity
1000 sheets (17-lb bond (64g/m
2
))
Print Paper Weight
13-lb bond (46g/m
2
) - 110-lb index (210g/m
2
)
Image Processing Mode
Line, Photo, Duo, Pencil
Resolution
Digital 600dpi
Master-making Time
Approx. 16 seconds (for A4/landscape/100% reproduction ratio)
Printing Area (max.)
11
5
/
16
"
×
16
3
/
4
" (287mm
×
425mm)
Print Reproduction Ratio
Zoom : 50 - 200%
Standard reproduction ratio (enlargement) : 154%, 129%, 121%
Standard reproduction ratio (reduction) : 94%, 78%, 65%, 61%
Print Speed
Approx. 60 - 130 sheets per minute (five steps variable)
Print Position Adjustment
Vertical :
±
1
/
2
" (
±
15mm) Horizontal :
±
3
/
8
" (
±
10mm)
Ink Supply
Full automatic (1000 ml per cartridge)
Master Supply/Disposal
Full automatic (approx. 215 sheets per roll)
Master Disposal Capacity
100 sheets
User Interface
LED panel with Progress Arrow indicators, front-side operation
Optional Accessories
Auto Document Feeder AF-V, Job Separator IV:N, Key Card Counter IV:N,
Color Cylinder(Drum), Network Interface Card RISORINC-NET, Special
Paper Feed Kit, Stand, Printer Control Board RISORINC3N
Power Source
RZ390UI : 120V AC, 60Hz
Dimensions
When in use : 54
5
/
16
"(W)
×
25
3
/
8
"(D)
×
26"(H) (1380mm(W)
×
645mm(D)
×
660mm(H))
When in storage : 30
1
/
2
"(W)
×
25
3
/
8
"(D)
×
26"(H) (775mm(W)
×
645mm(D)
×
660mm(H))
Weight
Approx. 220lb (100 kg)
Riso Kagaku Technical Training Center Version
Summary of RZ200AW
Page 1
Riso kagaku technical training center version.
Page 2
Memo riso kagaku technical training center version.
Page 3
Contents 4 replacing and disposing consumables 66 replacing the ink cartridge ............................................................................................... 66 replacing the master roll ....................................................................................................
Page 4: Contents
2 contents welcome to the riso rz series model .............................................................................. 5 getting acquainted 6 parts and components........................................................................................................ 6 control panels.............
Page 5: Contents
2 contents welcome to the riso rz series model .............................................................................. 5 getting acquainted 6 parts and components........................................................................................................ 6 control panels.............
Page 6
Contents 4 replacing and disposing consumables 66 replacing the ink cartridge ............................................................................................... 66 replacing the master roll ....................................................................................................
Page 7: Control Panels
Getting acquainted control panels 8 control panels main control panel 1) check & error display ()p.80) indicates error locations and status. 2) indicator 3) print quantity display (error number display) shows the number of printed copies, numeric val- ues entered for various settings, and error num-...
Page 8: Getting Acquainted
Parts and components 6 getting acquainted parts and components getting acquainted parts and components 7 1) stage cover 2) sub control panel ()p.10) 3) stage glass ()p.77) place an original face down. 4) main display ()p.80) 5) main control panel ()p.8) 6) master disposal box ()p.71) holds discarded...
Page 9: Getting Acquainted
Parts and components 6 getting acquainted parts and components getting acquainted parts and components 7 1) stage cover 2) sub control panel ()p.10) 3) stage glass ()p.77) place an original face down. 4) main display ()p.80) 5) main control panel ()p.8) 6) master disposal box ()p.71) holds discarded...
Page 10: Control Panels
Getting acquainted control panels 8 control panels main control panel 1) check & error display ()p.80) indicates error locations and status. 2) indicator 3) print quantity display (error number display) shows the number of printed copies, numeric val- ues entered for various settings, and error num-...
Page 11: Before Starting to Use
Safety guide - installation 12 before starting to use safety guide - installation this section describes the precautions to be observed when installing the machine. Read this section before install- ing the machine. Note: • your dealer will help you to determine a proper location for the machine at ...
Page 12
Getting acquainted control panels 10 sub control panel 1) free reproduction size display (for rz2xx, unavailable) ()p.36) shows the enlargement/reduction ratio specified using the zoom function. 2) reproduction size selection key ()p.35) when selecting from among the standard repro- duction sizes, p...
Page 13
Getting acquainted control panels 10 sub control panel 1) free reproduction size display (for rz2xx, unavailable) ()p.36) shows the enlargement/reduction ratio specified using the zoom function. 2) reproduction size selection key ()p.35) when selecting from among the standard repro- duction sizes, p...
Page 14: Before Starting to Use
Safety guide - installation 12 before starting to use safety guide - installation this section describes the precautions to be observed when installing the machine. Read this section before install- ing the machine. Note: • your dealer will help you to determine a proper location for the machine at ...
Page 15
Before starting to use paper recommendations 16 tips for better paper feeding to prevent paper jams and misfeeds, follow the directions below: • when using standard or light-weight paper, set the paper feed pressure adjustment lever to “normal”. Then set the paper jumping wing adjustment dial (for r...
Page 16: Paper Recommendations
Before starting to use connection with a computer (option) 14 connection with a computer (option) with an optional interface board (printer control board risorinc3n) installed, you can directly send data from a connected computer to the machine as an original for printing. Because digital data itsel...
Page 17: Paper Recommendations
Before starting to use connection with a computer (option) 14 connection with a computer (option) with an optional interface board (printer control board risorinc3n) installed, you can directly send data from a connected computer to the machine as an original for printing. Because digital data itsel...
Page 18
Before starting to use paper recommendations 16 tips for better paper feeding to prevent paper jams and misfeeds, follow the directions below: • when using standard or light-weight paper, set the paper feed pressure adjustment lever to “normal”. Then set the paper jumping wing adjustment dial (for r...
Page 19: Originals
Before starting to use preparing to print 20 adding or replacing paper when you add paper or replace with paper of a different size at the time of printing, press the feed tray descent but- ton to lower the paper feed tray. Pressing the button gently causes the tray to be lowered to the bottom. If y...
Page 20: Preparing to Print
Before starting to use originals 18 maximum printing areas and margins the maximum printing areas are as follows. Important!: • no matter which size of originals is printed, the margins indicated on the figure are required for the originals. Reduce the original if necessary to fit it inside of the m...
Page 21: Preparing to Print
Before starting to use originals 18 maximum printing areas and margins the maximum printing areas are as follows. Important!: • no matter which size of originals is printed, the margins indicated on the figure are required for the originals. Reduce the original if necessary to fit it inside of the m...
Page 22: Originals
Before starting to use preparing to print 20 adding or replacing paper when you add paper or replace with paper of a different size at the time of printing, press the feed tray descent but- ton to lower the paper feed tray. Pressing the button gently causes the tray to be lowered to the bottom. If y...
Page 23: Basic Operations
Safety guide - handling and operation 24 basic operations safety guide - handling and operation this section describes the precautions to be observed when handling the machine. Read this section before operat- ing the machine. Operation environment important!: • operate the machine under the followi...
Page 24
Before starting to use preparing to print 22 z for ordinary paper with images lopsided on page press to open the two paper arrangers on the more heavily printed side. Z for thick paper press to open the two paper arrangers (right and left) closer to the machine. 5 adjust the paper jumping wing. (for...
Page 25
Before starting to use preparing to print 22 z for ordinary paper with images lopsided on page press to open the two paper arrangers on the more heavily printed side. Z for thick paper press to open the two paper arrangers (right and left) closer to the machine. 5 adjust the paper jumping wing. (for...
Page 26: Basic Operations
Safety guide - handling and operation 24 basic operations safety guide - handling and operation this section describes the precautions to be observed when handling the machine. Read this section before operat- ing the machine. Operation environment important!: • operate the machine under the followi...
Page 27
Basic operations basic operations 28 note: • you can place up to about 50 sheets of orig- inals in the adf unit. • if using the custom setting mode you select on for semi-auto, the next master-making is automatically started and then the machine will stop when the adf unit con- tains originals. ) p....
Page 28: Basic Process
Basic operations basic process 26 basic process the machine presents two basic operational processes; master-making process and printing process. Z process for printing from a paper document or book a placed original is scanned by the scanner, and a generated master is rolled around the print cylind...
Page 29: Basic Process
Basic operations basic process 26 basic process the machine presents two basic operational processes; master-making process and printing process. Z process for printing from a paper document or book a placed original is scanned by the scanner, and a generated master is rolled around the print cylind...
Page 30
Basic operations basic operations 28 note: • you can place up to about 50 sheets of orig- inals in the adf unit. • if using the custom setting mode you select on for semi-auto, the next master-making is automatically started and then the machine will stop when the adf unit con- tains originals. ) p....
Page 31: Setting Up For
Selecting the image processing mode [line, photo, duo] 32 setting up for scanning originals selecting the image processing mode [line, photo, duo] in order to make a quality master, select an appropriate mode depending on whether originals contain only line(text) or photo or both of them. Press the ...
Page 32
Basic operations basic operations 30 printing with data generated by a computer (optional kit required) 1 set the power switch to (on) to turn the power on. The power switch is located on the lower right side of the machine. : power on : power off important!: • when the machine is in the energy savi...
Page 33
Basic operations basic operations 30 printing with data generated by a computer (optional kit required) 1 set the power switch to (on) to turn the power on. The power switch is located on the lower right side of the machine. : power on : power off important!: • when the machine is in the energy savi...
Page 34: Setting Up For
Selecting the image processing mode [line, photo, duo] 32 setting up for scanning originals selecting the image processing mode [line, photo, duo] in order to make a quality master, select an appropriate mode depending on whether originals contain only line(text) or photo or both of them. Press the ...
Page 35
Setting up for scanning originals enlarging and reducing originals [enlargement/reduction] 36 enlarging and reducing with the zoom function [zoom] (for rz2xx, unavailable) specify the enlargement/reduction ratio between 50% and 200% in increments of 1%. 1 press the key to select the zoom mode. The c...
Page 36: [Dot Process]
Setting up for scanning originals processing photos with dot screening [dot process] (for rz2xx, unavailable) 34 processing photos with dot screening [dot process] (for rz2xx, unavailable) this function processes photo originals with dot screening, resulting in clearer printing. You can select the d...
Page 37: [Dot Process]
Setting up for scanning originals processing photos with dot screening [dot process] (for rz2xx, unavailable) 34 processing photos with dot screening [dot process] (for rz2xx, unavailable) this function processes photo originals with dot screening, resulting in clearer printing. You can select the d...
Page 38
Setting up for scanning originals enlarging and reducing originals [enlargement/reduction] 36 enlarging and reducing with the zoom function [zoom] (for rz2xx, unavailable) specify the enlargement/reduction ratio between 50% and 200% in increments of 1%. 1 press the key to select the zoom mode. The c...
Page 39: Or Dark Contents
Setting up for scanning originals printing originals side-by-side [2-up printing] 40 restrictions on 2-up printing 2-up printing restricts the sizes of paper to be used, paper orientations, and the enlargement/reduction ratios. Enlargement/reduction ratio the table shows enlargement/reduction ratios...
Page 40: Reproducing Bound Documents
Setting up for scanning originals reproducing bound documents [book shadow edit] 38 reproducing bound documents [book shadow edit] this function erases the binding “spine” shadow when printing from such bound originals with facing pages as mag- azines and books. Important!: • the initial settings ha...
Page 41: Reproducing Bound Documents
Setting up for scanning originals reproducing bound documents [book shadow edit] 38 reproducing bound documents [book shadow edit] this function erases the binding “spine” shadow when printing from such bound originals with facing pages as mag- azines and books. Important!: • the initial settings ha...
Page 42: Or Dark Contents
Setting up for scanning originals printing originals side-by-side [2-up printing] 40 restrictions on 2-up printing 2-up printing restricts the sizes of paper to be used, paper orientations, and the enlargement/reduction ratios. Enlargement/reduction ratio the table shows enlargement/reduction ratios...
Page 43: Automatic Printing
Setting up for scanning originals automatic printing [auto-process] 44 automatic printing [auto-process] with “auto-process” selected, enter the number of copies to be printed, and then press the key. The master-mak- ing and printing processes are automatically executed in a sequence. Press the key ...
Page 44
Setting up for scanning originals printing originals side-by-side [2-up printing] 42 operational procedure 1 place an original. Z when placing on the stage glass place the original face down in the vertical ori- entation. Position it using the mark on the left- hand side of the glass. Z when placing...
Page 45
Setting up for scanning originals printing originals side-by-side [2-up printing] 42 operational procedure 1 place an original. Z when placing on the stage glass place the original face down in the vertical ori- entation. Position it using the mark on the left- hand side of the glass. Z when placing...
Page 46: Automatic Printing
Setting up for scanning originals automatic printing [auto-process] 44 automatic printing [auto-process] with “auto-process” selected, enter the number of copies to be printed, and then press the key. The master-mak- ing and printing processes are automatically executed in a sequence. Press the key ...
Page 47: Adjusting The Print Position
Setting up for printing adjusting the print position [print position adjustment] 48 adjusting the print position [print position adjustment] use the vertical print position adjustment keys to adjust the print position in the vertical direction; and use the hor- izontal print position adjustment dial...
Page 48: Setting Up For Printing
Producing proof copies [proof] 46 setting up for printing producing proof copies [proof] after adjusting the print position and density, you can produce proof copies to check the print quality. Press the key. Proof copy does not affect the number shown on the print quantity display. Note: • by holdi...
Page 49: Setting Up For Printing
Producing proof copies [proof] 46 setting up for printing producing proof copies [proof] after adjusting the print position and density, you can produce proof copies to check the print quality. Press the key. Proof copy does not affect the number shown on the print quantity display. Note: • by holdi...
Page 50: Adjusting The Print Position
Setting up for printing adjusting the print position [print position adjustment] 48 adjusting the print position [print position adjustment] use the vertical print position adjustment keys to adjust the print position in the vertical direction; and use the hor- izontal print position adjustment dial...
Page 51: Changing The Print Speed
Advanced features automatic sorting into groups [programmed printing] 52 5 press the [ ] key. The machine then allows you to enter the number of copies for the second group. Repeat steps 2 through 5 to specify the number of copies and sets for each group. 6 place an original. Z when placing on the s...
Page 52: Advanced Features
Automatic sorting into groups [programmed printing] 50 advanced features automatic sorting into groups [programmed printing] from a single sheet of original, this function prints and sorts into various groups having different number of copies per set and/or different number of sets. Note: • up to fi...
Page 53: Advanced Features
Automatic sorting into groups [programmed printing] 50 advanced features automatic sorting into groups [programmed printing] from a single sheet of original, this function prints and sorts into various groups having different number of copies per set and/or different number of sets. Note: • up to fi...
Page 54: Changing The Print Speed
Advanced features automatic sorting into groups [programmed printing] 52 5 press the [ ] key. The machine then allows you to enter the number of copies for the second group. Repeat steps 2 through 5 to specify the number of copies and sets for each group. 6 place an original. Z when placing on the s...
Page 55: Idling Action [Idling]
Advanced features printing with a linked printer (option) (for rz2xx, unavailable) 56 4 make necessary settings. You can set the following functions: • image processing mode • pencil • enlargement/reduction ratio • scanning level 5 enter the number of copies to be printed, using the print quantity k...
Page 56: [Confidential Mode]
Advanced features protecting confidential documents [confidential mode] 54 protecting confidential documents [confidential mode] after printing is complete, the master remains on the print cylinder(drum) and is ready for printing another set of copies. To protect confidential documents from unauthor...
Page 57: [Confidential Mode]
Advanced features protecting confidential documents [confidential mode] 54 protecting confidential documents [confidential mode] after printing is complete, the master remains on the print cylinder(drum) and is ready for printing another set of copies. To protect confidential documents from unauthor...
Page 58: Idling Action [Idling]
Advanced features printing with a linked printer (option) (for rz2xx, unavailable) 56 4 make necessary settings. You can set the following functions: • image processing mode • pencil • enlargement/reduction ratio • scanning level 5 enter the number of copies to be printed, using the print quantity k...
Page 59: [Custom Setting Mode]
Advanced features customizing the initial settings [custom setting mode] 60 30 total quantity display the total number of copies printed with the machine is displayed. This number is displayed by two switching screens; a 3-digit number preceded by an under bar and a 4- digit number. Example: for 1,2...
Page 60
Advanced features customizing the initial settings [custom setting mode] 58 09 2-up printing interval time change the initial setting for the 2-up printing interval time. None 15 seconds 30 seconds 10 energy saving mode when the machine is not used for a certain period of time, it is automatically t...
Page 61
Advanced features customizing the initial settings [custom setting mode] 58 09 2-up printing interval time change the initial setting for the 2-up printing interval time. None 15 seconds 30 seconds 10 energy saving mode when the machine is not used for a certain period of time, it is automatically t...
Page 62: [Custom Setting Mode]
Advanced features customizing the initial settings [custom setting mode] 60 30 total quantity display the total number of copies printed with the machine is displayed. This number is displayed by two switching screens; a 3-digit number preceded by an under bar and a 4- digit number. Example: for 1,2...
Page 63
Advanced features customizing the initial settings [custom setting mode] 64 5 repeat steps 3 and 4 to enter an ip address up to the fourth field. 6 press the key. The ip address setting is completed. Advanced features customizing the initial settings [custom setting mode] 61 changing procedure 1 pre...
Page 64
Advanced features customizing the initial settings [custom setting mode] 62 5 press the key to complete the set- tings. The changed contents are programmed and the normal mode is restored. Advanced features customizing the initial settings [custom setting mode] 63 ip address setting (for rz2xx, unav...
Page 65
Advanced features customizing the initial settings [custom setting mode] 62 5 press the key to complete the set- tings. The changed contents are programmed and the normal mode is restored. Advanced features customizing the initial settings [custom setting mode] 63 ip address setting (for rz2xx, unav...
Page 66
Advanced features customizing the initial settings [custom setting mode] 64 5 repeat steps 3 and 4 to enter an ip address up to the fourth field. 6 press the key. The ip address setting is completed. Advanced features customizing the initial settings [custom setting mode] 61 changing procedure 1 pre...
Page 67: Replacing The Master Roll
Replacing and disposing consumables replacing the master roll 68 replacing the master roll when the entire master roll is consumed, the master replacement indicator lights. Replace with a new master roll. Important!: • for the master roll, it is recommended to use the products specified by riso. 1 o...
Page 68: Replacing and Disposing
Replacing the ink cartridge 66 replacing and disposing consumables replacing the ink cartridge when the ink cartridge becomes empty, the ink replacement indicator lights. Replace with a new ink cartridge. Important!: • for the ink cartridge, it is recommended to use the products specified by riso. •...
Page 69: Replacing and Disposing
Replacing the ink cartridge 66 replacing and disposing consumables replacing the ink cartridge when the ink cartridge becomes empty, the ink replacement indicator lights. Replace with a new ink cartridge. Important!: • for the ink cartridge, it is recommended to use the products specified by riso. •...
Page 70: Replacing The Master Roll
Replacing and disposing consumables replacing the master roll 68 replacing the master roll when the entire master roll is consumed, the master replacement indicator lights. Replace with a new master roll. Important!: • for the master roll, it is recommended to use the products specified by riso. 1 o...
Page 71
Replacing and disposing consumables disposal of depleted consumables 72 disposal of depleted consumables dispose the depleted ink cartridges, master rolls and ejected masters according to the regulations in your local community. If required, separate the specific components using the following proce...
Page 72
Replacing and disposing consumables replacing the master roll 70 tip: • if you cannot insert the leading edge of the master well, use the following procedure: 1) raise the master guide flap. Turn the wheel beside the master guide flap inward to raise the master guide flap. 2) pull out the master rol...
Page 73
Replacing and disposing consumables replacing the master roll 70 tip: • if you cannot insert the leading edge of the master well, use the following procedure: 1) raise the master guide flap. Turn the wheel beside the master guide flap inward to raise the master guide flap. 2) pull out the master rol...
Page 74
Replacing and disposing consumables disposal of depleted consumables 72 disposal of depleted consumables dispose the depleted ink cartridges, master rolls and ejected masters according to the regulations in your local community. If required, separate the specific components using the following proce...
Page 75: Cleaning
Safety guide - cleaning 76 cleaning safety guide - cleaning this section describes the precautions to be observed when cleaning the machine. Read this section before cleaning the machine. A warning: • before cleaning any part of the machine, turn off the power. • do not remove any fixed covers. • co...
Page 76
Replacing and disposing consumables removing and installing the print cylinder (drum) 74 5 install the print cylinder(drum). Align the mark with the mark on the guide and position the print cylinder(drum) horizontal relative to the guide. Note: • if you manually rotate the print cylinder(drum), make...
Page 77
Replacing and disposing consumables removing and installing the print cylinder (drum) 74 5 install the print cylinder(drum). Align the mark with the mark on the guide and position the print cylinder(drum) horizontal relative to the guide. Note: • if you manually rotate the print cylinder(drum), make...
Page 78: Cleaning
Safety guide - cleaning 76 cleaning safety guide - cleaning this section describes the precautions to be observed when cleaning the machine. Read this section before cleaning the machine. A warning: • before cleaning any part of the machine, turn off the power. • do not remove any fixed covers. • co...
Page 79: Troubleshooting
Check & error display 80 troubleshooting check & error display when an error occurs on the machine or when consumables or other sections are not yet ready, the check & error display shows error locations and numbers indicating error types. For some errors, error numbers are shown on the error number...
Page 80
Cleaning cleaning 78 pressure roller if the pressure roller, which presses print paper against the print cylinder(drum), is stained, smudged strips may appear on the back of copies. If this happens, gently wipe the pressure roller with a soft cloth dampened with alcohol. B caution: • when putting yo...
Page 81
Cleaning cleaning 78 pressure roller if the pressure roller, which presses print paper against the print cylinder(drum), is stained, smudged strips may appear on the back of copies. If this happens, gently wipe the pressure roller with a soft cloth dampened with alcohol. B caution: • when putting yo...
Page 82: Troubleshooting
Check & error display 80 troubleshooting check & error display when an error occurs on the machine or when consumables or other sections are not yet ready, the check & error display shows error locations and numbers indicating error types. For some errors, error numbers are shown on the error number...
Page 83
Troubleshooting check & error display 84 7 j-02 a paper jam has occurred on the paper receiving tray section. Remove the paper jammed on the paper receiving tray section. If the error indications do not disappear, press the key. 8 j-01 a paper jam has occurred in the adf unit (option). Remove the or...
Page 84
Troubleshooting check & error display 82 3 a-02 a master has not been correctly wrapped around the print cylinder(drum). B caution: • the print cylinder(drum) is equipped with many metallic components. Touch the print cylinder(drum) only when necessary. These components may cut your fingers. • when ...
Page 85
Troubleshooting check & error display 82 3 a-02 a master has not been correctly wrapped around the print cylinder(drum). B caution: • the print cylinder(drum) is equipped with many metallic components. Touch the print cylinder(drum) only when necessary. These components may cut your fingers. • when ...
Page 86
Troubleshooting check & error display 84 7 j-02 a paper jam has occurred on the paper receiving tray section. Remove the paper jammed on the paper receiving tray section. If the error indications do not disappear, press the key. 8 j-01 a paper jam has occurred in the adf unit (option). Remove the or...
Page 87
Troubleshooting check & error display 88 when the indicator is off and “h” is shown on the print quantity display. In order to assure optimum printing, the machine acquires information from the consumables. If any reasons prevent the machine from acquiring the information, “h” is shown on the print ...
Page 88
Troubleshooting check & error display 86 3 f-01 a master has not been wrapped around the print cylinder(drum). Place an original and start with the master- making process. If you leave the machine without a master wrapped around the print cylinder(drum), malfunction may occur. Press the key, and the...
Page 89
Troubleshooting check & error display 86 3 f-01 a master has not been wrapped around the print cylinder(drum). Place an original and start with the master- making process. If you leave the machine without a master wrapped around the print cylinder(drum), malfunction may occur. Press the key, and the...
Page 90
Troubleshooting check & error display 88 when the indicator is off and “h” is shown on the print quantity display. In order to assure optimum printing, the machine acquires information from the consumables. If any reasons prevent the machine from acquiring the information, “h” is shown on the print ...
Page 91
Troubleshooting troubleshooting tips 92 in the book shadow editing, the position for shadow erasure is shifted. Custom-size paper has been placed on the paper feed tray. The book shadow editing does not allow custom-size paper to be used. Set standard-size paper. Custom-size book or magazine was pla...
Page 92: Troubleshooting Tips
Troubleshooting troubleshooting tips 90 troubleshooting tips if any problems occur during printing, check the following items and take appropriate procedures before calling your authorized service representative. Problem cause action the machine does not start when the power switch is pressed. The p...
Page 93: Troubleshooting Tips
Troubleshooting troubleshooting tips 90 troubleshooting tips if any problems occur during printing, check the following items and take appropriate procedures before calling your authorized service representative. Problem cause action the machine does not start when the power switch is pressed. The p...
Page 94
Troubleshooting troubleshooting tips 92 in the book shadow editing, the position for shadow erasure is shifted. Custom-size paper has been placed on the paper feed tray. The book shadow editing does not allow custom-size paper to be used. Set standard-size paper. Custom-size book or magazine was pla...
Page 95
Troubleshooting troubleshooting tips 96 the indicator lights even when a paper jam has not occurred. Lifted paper was ejected at the time of the second rotation of the print cylinder(drum). Check the printed copies, and if the top margin is less than 3 / 16 "(5 mm), slightly lower the print position...
Page 96
Troubleshooting troubleshooting tips 94 the left and right print positions have been shifted. The left and right print positions have not been adjusted for the center. The paper feed tray is equipped with the horizontal print position adjustment dial. Lower the tray, adjust the position, and then pe...
Page 97
Troubleshooting troubleshooting tips 94 the left and right print positions have been shifted. The left and right print positions have not been adjusted for the center. The paper feed tray is equipped with the horizontal print position adjustment dial. Lower the tray, adjust the position, and then pe...
Page 98
Troubleshooting troubleshooting tips 96 the indicator lights even when a paper jam has not occurred. Lifted paper was ejected at the time of the second rotation of the print cylinder(drum). Check the printed copies, and if the top margin is less than 3 / 16 "(5 mm), slightly lower the print position...
Page 99
Appendixes specifications 100 riso rz370 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 100: Appendixes
Optional accessories 98 appendixes optional accessories a variety of optional accessories are available to enhance the capabilities of the machine. For details about the optional accessories, see their respective user's manuals. Z color cylinder(drum) a variety of colors are available, such as blue,...
Page 101: Appendixes
Optional accessories 98 appendixes optional accessories a variety of optional accessories are available to enhance the capabilities of the machine. For details about the optional accessories, see their respective user's manuals. Z color cylinder(drum) a variety of colors are available, such as blue,...
Page 102
Appendixes specifications 100 riso rz370 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 103
Appendixes specifications 104 riso rz200 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 104
Appendixes specifications 102 riso rz230 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 105
Appendixes specifications 102 riso rz230 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 106
Appendixes specifications 104 riso rz200 note: • the specifications are subject to change without prior notice. Master-making/printing methods high-speed digital master-making/full automatic stencil printing original type book (22lb(10 kg) or less), sheet original size (max./min.) when using the sta...
Page 107: Feature List
Index 023-36005-003 108 r receiving tray paper guide .............................7, 21 reduction ............................................................... 35 replace ink cartridge indicator ......................80, 87 replace master roll indicator ..................68, 80, 87 reproduction si...
Page 108: Index
106 index symbols * key ......................................................................... 8 + key ........................................................................ 9 × key ........................................................................ 9 numerics 1:1 key ........................
Page 109: Index
106 index symbols * key ......................................................................... 8 + key ........................................................................ 9 × key ........................................................................ 9 numerics 1:1 key ........................
Page 110: Feature List
Index 023-36005-003 108 r receiving tray paper guide ............................. 7 , 21 reduction ............................................................... 35 replace ink cartridge indicator ...................... 80 , 87 replace master roll indicator .................. 68 , 80, 87 reproduct...
Page 111
Memo riso kagaku technical training center version.
Page 112
Riso kagaku technical training center version.