Type of exhibit: users manual fcc part: 2.1033(c)(3) ic part: rsp-100, section 7.2(b) rss-gen, section 7.1.4, 7.1.5 manufacturer: ritron, inc. Model: rpm-160 type of unit: vhf mobile transceiver fcc id: aierit24-160 ic id: 1084a-24160 date: september 20, 2006.
Ritron rpm “60” series fm mobile radio user manual.
Table of contents _______________________________________________ introduction owner information standard features accessories radio controls operation warranty.
Introduction___________________________________________________ the rpm 60 series mobile is a programmable, two-way radio that can transmit and receive on any one of 35 channels in the professional fm communications band (vhf or uhf band). This radio features (2) programmable front panel buttons and...
Owner information_____________________________________________ fcc regulations the fcc requires you to obtain a station license for your radios before using the equipment to transmit. The station licensee is responsible for ensuring that transmitter power, frequency, and deviation are within the lim...
Rf exposure rf warning statement: the following statement appears in the users manual regarding rf safety: rf energy exposure awareness and control information, and operational instructions for fcc occupational use requirements before using your mobile 2-way radio, read this important rf energy awar...
Fcc exposure guidelines, your radio antenna radiates measurable rf energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Your ritron rpm 60 series mobile radio complies with the following rf energy exposure standards and guidelines: • united ...
Approved accessories • this radio has been tested and meets the fcc rf exposure guidelines when used with the ritron accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the fcc’s rf exposure guidelines, and may violate fcc regulations. • for a...
If your equipment fails to operate properly, or you wish to have your mobile programmed, contact your authorized dealer or ritron’s repair department. Ritron, inc. Repair department 505 west carmel drive carmel, in. 46032 usa phone: (317)846-1201 fax: (317)846-4978 www.Ritron.Com standard features__...
Accessories____________________________________________________ contact your dealer or ritron to purchase the following items: item___ description_____________________________________________________ rm-4 hand microphone, standard rm-6tt hand microphone w/12-key dtmf keypad rm-6 desktop microphone r...
Radio controls – general______________________________________ on/off volume control the on/off volume control knob switches the radio on and off, and adjust the volume level. To switch the radio on, rotate the control knob clockwise. To raise the volume level continue rotating the control clockwise...
Transmit / busy indicator the transmit/busy indicator is a dual color led. When the operating channel is busy, the tx/busy led will flash green. At any time when the radio is transmitting, the tx/busy led will light red continuously. Speaker an internal 5 watt speaker is mounted behind the front pan...
Antenna connector the antenna connector is located on the back of the radio. It is a 50 ohm uhf type connector. The radio is capable of 40 watts maximum of rf power. External speaker jack the external speaker is also located on the back of the radio. The connector is a 3.5mm stereo type connector. T...
Operation______________________________________________________ what the radio tones mean the ritron rpm mobile responds to certain instructions by sounding a tone or series of tones. These tones can tell you whether the radio is working as you expect. Power on: single high frequency tone when the r...
Increment or decrement the displayed channel. Any time the display is incremented to or decremented to channel 1, then, a long tone is emitted to let you know you have reached channel 1. This allows you to change channels without looking at the display. Operating modes you can hear calls with the rp...
The monitor button may be programmed one of two ways; (see your dealer for programming) 1. Toggle - in toggle mode, when the monitor button is pressed and released, the radio is switched between 2-tone decode, coded squelch and carrier squelch. If one beep is heard when the button is pressed and rel...
Transmit make sure that the channel is not busy before you begin transmitting. Check the tx/busy led, which flashes green if the channel is busy. This occurs regardless of any code signaling programmed. Normally, you should not transmit until the channel is clear. To transmit, remove the microphone ...
