Rittal 7320.790 Assembly And Operating Instructions Manual - 4 Assembly and Installation
4 Assembly and installation
4
Automatic Door Control Unit
EN
3.2 Proper use
The Automatic Door Control Unit may only be used
for the automatic opening of the TS 8 rack doors in
an emergency situation.
Other applications other than those mentioned in this
manual are expressly not permitted.
Warning!
The system may not automatically
activate any door systems that exhibit
dangerous door forces that can injure
persons in any manner.
Only the RITTAL Automatic Door Kit
product may be activated.
3.3 Dimensions
W x H x D: 136 mm x 44 mm x 129 mm
3.4 Scope of delivery
1 x
Automatic Door Control Unit
1 x
Assembly, installation and operating instructions
2 x
Nylon tape fastening
2 x
RJ12 connection cable
4 Assembly and installation
The Automatic Door Control Unit is installed in a
RITTAL TS 8 rack in accordance with the procedure
described below.
4.1 Assembly procedure
Assembly with nylon loop fastening:
Assembly in the 19" frame with 7320.440:
Mounting module with CMC 7320.450
Fig. 2: Nylon loop fastening
Fig. 3: 19" attachment
Fig. 4: Enclosure assembly with 7320.450