1. DL manuals
  2. Rittal
  3. Fan
  4. SK 3237 Series
  5. Mounting Instructions

Rittal SK 3237 Series Mounting Instructions

Other manuals for SK 3237 Series: Installation Manual
Manual is about: Fan-and-filter unit

Summary of SK 3237 Series

  • Page 1

    Montage-, installations- und bedienungsanleitung assembly and operating instructions notice d’emploi, d’installation et de montage montage- en bedieningshandleiding montage- och hanteringsanvisning istruzioni di montaggio e funzionamento instrucciones de montaje y funcionamiento filterlüfter fan-and...

  • Page 3: Contents

    Rittal fan-and-filter unit assembly and operating instructions 3 en contents 1 notes on documentation . . . . . . 4 1.1 other applicable documents . . . . . . . . . . . . . . . . 4 1.2 storing the documents . . . . . . 4 1.3 symbols used . . . . . . . . . . . . . 4 2 safety notes . . . . . . . . . ....

  • Page 4: 1 Notes On Documentation

    1 notes on documentation 4 rittal fan-and-filter unit assembly and operating instructions en 1 notes on documentation these assembly instructions are aimed at tradespersons who are familiar with as- sembly and installation of the fan-and-filter unit, and at trained specialists who are familiar with ...

  • Page 5: 2 Safety Notes

    2 safety notes rittal fan-and-filter unit assembly and operating instructions 5 en 2 safety notes please observe the following general safe- ty notes when assembling and operating the unit: – assembly, installation and servicing may only be performed by properly trained specialists. – do not obstruc...

  • Page 6: 3 Device Description

    3 device description 6 rittal fan-and-filter unit assembly and operating instructions en 3.1.2 control rittal fan-and-filter units may be controlled more efficiently using a thermostat (model no. Sk 3110.000), digital temperature display (model no. Sk 3114.200), tem- perature-dependent speed control...

  • Page 7: 4 Assembly and Connection

    4 assembly and connection rittal fan-and-filter unit assembly and operating instructions 7 en 4 assembly and connection 4.1 choosing the installation site when choosing the installation site for the enclosure, please observe the following: – the site for the enclosure, and hence the arrangement of t...

  • Page 8: 4 Assembly and Connection

    4 assembly and connection 8 rittal fan-and-filter unit assembly and operating instructions en fig. 2: remove the louvred grille • if transporting over long distances or to a different installation site, we strongly recommend that you screw-fasten the fan to prevent it from falling out of the mountin...

  • Page 9: Carrying Out The Electrical

    5 carrying out the electrical rittal fan-and-filter unit assembly and operating instructions 9 en 5 carrying out the electrical installation 5.1 installing the power supply • complete the electrical installation by following the wiring plans. • remove the red cover from the electri- cal connection. ...

  • Page 10: 6 Commissioning

    6 commissioning 10 rittal fan-and-filter unit assembly and operating instructions en 6 commissioning • once all the assembly and installation work is complete, switch on the power supply to the fan-and-filter unit. The fan-and-filter unit operates automati- cally, in other words, the fan will start ...

  • Page 11: 8 Inspection and Maintenance

    8 inspection and maintenance rittal fan-and-filter unit assembly and operating instructions 11 en 8 inspection and maintenance 8.1 general the built-in, maintenance-free fan is moun- ted on a friction bearing (sk 3237.Xxx, sk 3238.Xxx and sk 3239.Xxx) or ball bearing (sk 3240.Xxx, sk 3241.Xxx, sk 32...

  • Page 12: 10 Technical Specifications

    10 technical specifications 12 rittal fan-and-filter unit assembly and operating instructions en 10 technical specifications – observe the mains connection data (voltage and frequency) as per the rating plate. – observe the pre-fuse as per the specifi- cations on the rating plate. Unit model no. Sk ...

  • Page 13: 10 Technical Specifications

    10 technical specifications rittal fan-and-filter unit assembly and operating instructions 13 en unit model no. Sk fan-and-filter unit, ral 7035 – 3239.100 3239.110 3239.124 emc fan-and-filter unit, ral 7035 – 3239.600 – – rated operating voltage v hz 230, 1~, 50/60 115, 1~, 50/60 24 (dc) rated curr...

  • Page 14: 10 Technical Specifications

    10 technical specifications 14 rittal fan-and-filter unit assembly and operating instructions en unit model no. Sk fan-and-filter unit, ral 7035 – 3240.100 3240.110 3240.124 3241.100 3241.110 3241.124 emc fan-and-filter unit, ral 7035 – 3240.600 – – 3241.600 – – rated operating voltage v hz 230, 1~,...

  • Page 15: 10 Technical Specifications

    10 technical specifications rittal fan-and-filter unit assembly and operating instructions 15 en unit model no. Sk fan-and-filter unit, ral 7035 – 3243.100 3243.110 3244.100 3244.110 3244.140 3245.500 3245.510 emc fan-and- filter unit, ral 7035 – 3243.600 – 3244.600 – – 3245.600 – rated operating vo...

  • Page 16

    11 cut-out/drilling dimensions 16 rittal fan-and-filter unit assembly and operating instructions en 11 cut-out/drilling dimensions fig. 8: cut-out dimensions fig. 9: drilling pattern b = width t = depth tab. 6: drilling dimensions h2 b2 h1 b1 t2 t1 model no. Sk Ø mm f mm 3237.Xxx 3.5 100.5 3238.Xxx ...

  • Page 17: 12 Emc Fan/outlet Filter

    12 emc fan/outlet filter rittal fan-and-filter unit assembly and operating instructions 17 en 12 emc fan/outlet filter to achieve emc protection, the emc fans and emc outlet filters should be snapped into the mounting cut-out and screw- fastened using the supplied screws. Next, the four contact foil...

  • Page 18: 13 Connection Diagrams

    13 connection diagrams 18 rittal fan-and-filter unit assembly and operating instructions en 13 connection diagrams fig. 11: connection diagrams m 3~ l1 l2 l3 pe l n pe m 1~ l n pe m 1~ l n pe m 24 v dc – 24 + 3237.100/.110/.600 3238.100/.110/.600 3239.100/.110/.600 3243.100/.110/.600 3244.100/.110/....

  • Page 19: 13 Connection Diagrams

    Rittal fan-and-filter unit assembly and operating instructions 19 en max. Speed (as delivered) adjustable speed adjustable speed via pwm 1 – 10 khz adjustable speed via potentiometer 1 2 3 4 fig. 12: connection diagram sk 3245 tab. 7: explanations to fig. 12 no. Connection function/assignment con10 ...

  • Page 20

    20 rittal fan-and-filter unit assembly and operating instructions en 14 ec declaration of conformity 14 ec declaration of conformity.

  • Page 21

    5t h e d it io n 1 1 .201 1 / id n o .: 32 8 6 28 / d raw in g n o .: a 4 4 7 420 0sk 2 3 䡲 enclosures 䡲 power distribution 䡲 climate control 䡲 it infrastructure 䡲 software & services rittal gmbh & co. Kg postfach 1662 䡠 d-35726 herborn phone +49(0)2772 505-0 䡠 fax +49(0)2772 505-2319 e-mail: info@r...