1 www.Rivatech.De quick installation guide this manual has been designed to guide you through basic settings of your ip devices, such as installation and configuration for using them..
2 www.Rivatech.De step1. Assemble and install ip device manual adjustment for 3-axis movements before installation, make a manual adjustment on the inner liner. Perform 3-axis movements manually by turning the inner liner to different directions as above, and check if it moves properly. 1) connect t...
3 www.Rivatech.De step2. Connect cables to ip device connect each cable to the device. To see the correct positions of all connectors, refer to the following image below. Step3. Set up network environment la n dc 12v make sure the polarity is correct. Incorrect connection may cause malfunction or da...
4 www.Rivatech.De the default ip address of your ip device is 192.168.Xxx.Xxx. You can find the available ip address from the mac address of your device. Please make sure the device and your pc are on the same network segment before running the installation. If the network segment was different betw...
5 www.Rivatech.De step4. View video on web page view the live video on a web page using your ip device and its ip address. To have the correct ip address ready and use it on a web page: 1. Convert a mac address to an ip address. Refer to the hexadecimal-decimal conversion chart at the end of this ma...
6 www.Rivatech.De step5. Setting ip address to set up the network configuration: 1. Click setup on the upper right of the web page. The login page is displayed as below. 2. Enter the default user name (root) and the default password (pass), and then select ok. 3. Click system options on the left of ...
7 www.Rivatech.De advanced setup (ipadmintool) ipadmintool is a utility program for ip products. Following list shows a part of features that ipadmintool provides. Configure ip address, subnet mask and gateway shows network related information such as mac address updates firmware reboots the device ...
8 www.Rivatech.De resetting to the factory default settings this will reset all parameters, including the ip address, to the factory default initialization. To perform the factory default settings: 1. Disconnect the power supply from the device. 2. Connect the power to the device with the reset butt...
9 www.Rivatech.De hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0a 10 0b 11 0c 12 0d 13 0e 14 0f 15 10 16 11 17 12 18 13 19 14 20 15 21 16 22 17 23 18 24 19 25...
10 www.Rivatech.De hex dec 80 128 81 129 82 130 83 131 84 132 85 133 86 134 87 135 88 136 89 137 8a 138 8b 139 8c 140 8d 141 8e 142 8f 143 90 144 91 145 92 146 93 147 94 148 95 149 96 150 97 151 98 152 99 153 9a 154 9b 155 9c 156 9d 157 9e 158 9f 159 hex dec a0 160 a1 161 a2 162 a3 163 a4 164 a5 165...
