Riva RC3202HD-6111 Installation Manual

Other manuals for RC3202HD-6111: Quick Installation Manual

Summary of RC3202HD-6111

  • Page 1

    Www.Rivatech.De rc3202hd-6111 installation guide.

  • Page 2

    Www.Rivatech.De information to user caution risk of electric shock, do not open caution: to reduce the risk of electric shock, do not remove cover (or back). Contact qualified service personnel for internal parts. This symbol is intended to alert the user the presence of un-insulated “dangerous volt...

  • Page 3

    Www.Rivatech.De table of contents 1. Features ............................................................................. 4 2. Package contents ............................................................... 5 3. Part names ......................................................................... ...

  • Page 4

    Www.Rivatech.De 1. Features camera full hd indoor dome ip camera high quality compression in real time streaming 1/2.9” high quality cmos image sensor digital day / night and digital wdr onvif support streaming dual streaming mode burnt-in text unicast/multicast video/audio video compression: h.264,...

  • Page 5

    Www.Rivatech.De 2. Package contents the package contains main camera, dc power adaptor, universal plugs, screws, anchors, quick installation guide, camera opener, and clamping core. Unpack carefully and handle the equipment with care. Camera dc power adaptor universal plugs screws and anchors quick ...

  • Page 6

    Www.Rivatech.De 3. Part names 1reset button the reset button can be used for restarting the device or resetting it to factory default. Refer to 6.3. Reset and 6.4. Factory default for more details. 2io terminal connector connect cables into this connector for digital input/output. Refer to 5. Connec...

  • Page 7

    Www.Rivatech.De 4. Installation * the lens focus is pre-adjusted, best at 3m distance, when the camera is delivered out of factory. It is recommended not to adjust the lens focus unless it has to be. To prevent products from damaging, place the camera on stable and non-vibrating surfaces if the stab...

  • Page 8

    Www.Rivatech.De 4.1. Installation template (unit: mm) installation template image’s size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separately. Caution ! Installation template 3202 v1.0

  • Page 9

    Www.Rivatech.De 4.2. Manual adjustment for 3-axis movements adjust the lens to the desired position by manually moving its upper lens shell, reinforced body or horizontal platform in the following directions. 4.3. Lens focus adjustment set ring lens 1) remove the dome cover with the opener included ...

  • Page 10

    Www.Rivatech.De 4.4. Setting the image attribute through the camera’s webpage, users can configure image settings. The camera image’s brightness, contrast, saturation and sharpness are adjustable through the image settings. (setup > video & audio > camera)..

  • Page 11

    Www.Rivatech.De 5. Connections do di out in com com do di out in com com lan dc 12v in com out com di do do do.

  • Page 12

    Www.Rivatech.De do com device internal relay type 1sensor (di) connection the camera provides 1 channel d/i. It can be connected to either a voltage type sensor or a relay type sensor as the following figures. Settings can be done through the camera’s webpage. Input voltage range: 0vdc minimum to 5v...

  • Page 13

    Www.Rivatech.De 6. Configuration 6.1. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the device and pc are on a sa...

  • Page 14

    Www.Rivatech.De 2. Start the microsoft® internet explorer web browser and enter the address of the device. 3. Web streaming and device configurations are supported through activex program. When the activex installation window appears, authorize and install the activex. 6.1.2. Custom ip environment i...

  • Page 15

    Www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets of ip address, which are to be the uniq...

  • Page 16

    Www.Rivatech.De caution ! 6.2.1. Access through ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. Ipadmintool and the manual can download from www.Rivatech.De homepage. 1. From the ipadmintool’s ...

  • Page 17

    Www.Rivatech.De 6.3. Reset 1. While the device is in use, press the reset button. 2. Wait for the system to reboot. 6.4. Factory default 1. Press reset button and hold. 2. Release the reset button after led blinks for 5 seconds. 3. Wait for the system to reboot. The factory default settings are desc...

  • Page 18

    Www.Rivatech.De appendix (a): specifications summary camera module cmos image sensor 1/2.9” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electrica l resolution 1920 x 1080 min. Illumination color: 1.0 lux, bw: 0.001 lux (dss on) agc control auto lens 4.0mm f2.0 day & ni...

  • Page 19

    Www.Rivatech.De electrical characteristics power source dc 12v / poe power consumption 3.6w @ dc 12v video output - audio input - audio output - d/i max 50ma@5vdc, ttl level, vil=0.8v(max), vih=2.0v(min) d/o max 100ma@24vdc on-state resistance: 50 Ω (max continuous) environment condition operating t...

  • Page 20

    Www.Rivatech.De appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over- ethernet (poe) standard. The ieee 802.3af-2003 standard allows up to 15.4 w power to dev...

  • Page 21

    Www.Rivatech.De appendix (c): dimensions (unit: mm).

  • Page 22

    Www.Rivatech.De appendix (d): hexadecimal- decimal conversion table refer to the following table when converting the mac address of the device to the ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70 112 95 149 ba 186 d...

  • Page 23

    Www.Rivatech.De revision history man# date(m/d/y) comments 01a.03 07/05/2013 first release version.