DL manuals
Riva
Security Camera
RC3402HD-6311IR
Quick Installation Manual

Riva RC3402HD-6311IR Quick Installation Manual

Page of 8

Download

Print this page

Bookmark us

RC3402(63IR)04-2014-B

Quick Installation Guide

This manual provides instructions for quick installation and basic configuration of your IP device.

1. Part names and positions

Make sure if the polarity is correct. Incorrect connection may

cause malfunction or damage to the IP device.

Caution

Power Adaptor Connector (DC 12V)

* Model design and appearance are subject to change without any prior notice.

④

⑤

③

① LAN connector(POE supported)

② Reset button

③ microSD/SDHC slot

④ Power Cable connector(DC 12V)

⑤ Video Output connector

1. Open the ferrite core by lifting the clip.

2. Make one loop with the cable through the

ferrite core.

3. Close the ferrite core to hold the cable loop

into place.

Installing the ferrite core on the cable is to suppress high frequency noise level

in electronic singals.

Note

①

②

IPN3402HD-6311

* It is highly recommended to

install the provided ferrite cores

on the two cables respectively

like the image around this text.

Please also see

loop around the ferrite cores>

below for more details.

ZCAT1518-0730

ZCAT2132-1130

ZCAT1518-0730

ZCAT2132-1130

* The smaller ferrite core is for the MCX cable, and the bigger one is for the LAN cable.

LAN cable

MCX cable

1 2 3 4 5 6 7 Next › »

Summary of RC3402HD-6311IR

Page 1
Rc3402(63ir)04-2014-b 1 quick installation guide this manual provides instructions for quick installation and basic configuration of your ip device. 1. Part names and positions make sure if the polarity is correct. Incorrect connection may cause malfunction or damage to the ip device. Caution ! Powe...
Page 2
Rc3402(63ir)04-2014-b 2 돔커버 개폐 핸들 2. Install ip device there is only one type of mounting the device explained in this manual. Refer to the device’s installation guide for more various mounting types. Remove the dome cover with the opener included in the package like the image below. When closing th...
Page 3
Rc3402(63ir)04-2014-b 3 3. Adjust angle of the camera 1) adjust the angle by manually moving the camera gimbal and the horizontal platform following the instruction below. 2) connect to the web page of the device to see its real-time image. Refer to 6. View video on web page for details about using ...
Page 4
Rc3402(63ir)04-2014-b 4 5. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the device and pc are on the same area n...
Page 5: More Information
Rc3402(63ir)04-2014-b 5 ipadmintool ipadmintool and the manual can download from www.Rivatech.De homepage. Ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device...
Page 6
Rc3402(63ir)04-2014-b 6 6. View video on web page once the device’s proper ip address has been identified, type the url in a web browser to access the camera. At first time access, installation window may pop up. 1. When the browser asks to install the axumf software, click install to proceed. 2. Wh...
Page 7
Rc3402(63ir)04-2014-b 7 9. Factory default resetting the device back to the factory default will initialize all parameters including the ip address back to the factory defaults. To reset to the factory default: 1. Press the reset button and hold it while the device is in use. 2. Release the button a...
Page 8
Rc3402(63ir)04-2014-b 8 hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70 112 95 149 ba 186 df 223 2 2...