Riva RC3502HD-5211 Installation Manual

Other manuals for RC3502HD-5211: Quick Installation Manual

Summary of RC3502HD-5211

  • Page 1

    1 www.Rivatech.De rc3502hd-5311 installation guide.

  • Page 2

    2 www.Rivatech.De information to user caution risk of electric shock, do not open caution: to reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified seerivce personel. This symbol is intended to alert the user to the presence ...

  • Page 3

    3 www.Rivatech.De table of contents 1. Features ................................................................................ 5 2. Package contents ................................................................. 7 3. Part names ......................................................................

  • Page 4

    4 www.Rivatech.De appendix (d): hexadecimal-decimal conversion table ............. 27 revision history ....................................................................... 28.

  • Page 5

    5 01a.08 www.Rivatech.De 1.Features camera full hd outdoor dome ip camera (vandal proof) high quality compression in real time streaming 1/2.7” high quality cmos image sensor true day / night (icr) improvement of color rolling suppression remote zoom/focus control(one click af) streaming dual stream...

  • Page 6

    6 01a.08 www.Rivatech.De additional features micro sd card supported poe supported (camera and fan) built-in video content analysis ip66 certified sdk (software development kit) provided fan/heater unit (heater function only with external power supply) * when vca is activated, frame rate is limit to...

  • Page 7

    7 01a.08 www.Rivatech.De 2. Package contents unpack carefully and handle the equipment with care. The packaging contains: camera dc power adaptor dc jack cable 9-pin and 2-pin terminal block video out cable screws and anchors installation template hex wrench driver quick installation guide silicon w...

  • Page 8

    8 01a.08 www.Rivatech.De 3. Part names 1.Fan the fan and heater (underneath the black panel) are implemented for controlling temperature and moisture of the internal device. 2.Reset button the reset button can be used for restarting the device or resetting it to factory default. Refer to 6.3. Reset ...

  • Page 9

    9 01a.08 www.Rivatech.De 4.Video output, audio and io terminal connector a 9-pin terminal block is included in the device package. Connect this terminal block into this connector for cable connection of video output, audio input/output and digital input/output. Refer to 5.1. Connector for more detai...

  • Page 10

    10 01a.08 www.Rivatech.De 4. Installation when assembling the main body of the camera and its dome cover, make sure they fit each other into place. Note i 1) place the installation template that is provided in the package on the desired position of installation. 2) attach the waterproof silicon band...

  • Page 11

    11 01a.08 www.Rivatech.De the camera may fall off the ceiling even after the proper installation and mounting. To prevent any accident, make sure the ceiling is firm and stable enough to support the camera. If any reinforcement is needed, consult with your safety personnel and proceed with the insta...

  • Page 12

    12 01a.08 www.Rivatech.De 4.2. Setting the lens position set the lens position and adjust the zoom and focus by performing procedures as below. 1) remove the dome cover. 2) adjust the lens to the desired position by manually moving its body in the following directions. After adjustment, fasten the s...

  • Page 13

    13 01a.08 www.Rivatech.De 5.Connections 1audio input/output the camera has a mono audio input and a mono audio output. Since the output power for the audio is low, an amplifier speaker is needed for a clearer sound (do not use a headphone or earphone directly to the camera). 2sensor (di) connection ...

  • Page 14

    14 01a.08 www.Rivatech.De do not exceed the maximum input voltage or relay rate. 3alarm (do) connection only the relay type is supported. Relay rating: max 24vdc 50ma do not exceed the maximum relay rating. Caution ! Caution ! Do com relay type device internal +5v di com di com + - relay type voltag...

  • Page 15

    15 01a.08 www.Rivatech.De 4video input/output the camera provides 1 video out. Please note that the analog video signal is only 3 minutes present after pushing the pal/ntsc button and go back automatically to none video output mode (only installation process). 5lan connection this is a rj45 lan conn...

  • Page 16

    16 01a.08 www.Rivatech.De 6.Configuration 6.1.Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the device and pc are...

  • Page 17

    17 01a.08 www.Rivatech.De 2. Start the microsoft® internet explorer web browser and enter the address of the device. 3. Web streaming and device configurations are supported through activex program. When the activex installation window appears, authorize and install the activex. 6.1.2. Custom ip env...

  • Page 18

    18 01a.08 www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets of ip address, which are to b...

  • Page 19

    19 01a.08 www.Rivatech.De caution ! 2. Setup.Exe installation link or pop-up window appears, depends on microsoft® internet explorer version. Proceed with rest of setup installation. 3. Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, star...

  • Page 20

    20 01a.08 www.Rivatech.De caution ! 6.2.1. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. Ipadmintool is provided on usb stick or can download from www.Rivatech.De homepage. 1...

  • Page 21

    21 01a.08 www.Rivatech.De 6.3. Reset 1. Push the reset button and hold for 1~2 seconds. 2. Wait for the system to reboot. 6.4. Factory default if you reset your device to the factory default setting, all parameters including the ip address will be initialized. For the factory default reset: 1. While...

  • Page 22

    22 01a.08 www.Rivatech.De appendix (a): specifications summary camera module cmos image sensor 1/2.7” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electric al resolution 1920 x 1080 min. Illumination color: 0.5 lux, f1.2 bw: 0.001 lux, f1.2 agc control auto lens 3.0~9.0...

  • Page 23

    23 01a.08 www.Rivatech.De * when vca is activated, only one camera stream will be available and frame rate is limited to 15fps@1080p. Limitations are based on v.1.3.0 firmware release and could be changed without notice. Electrical characteristics power source dc 12v / poe ieee802.3af (class 0) powe...

  • Page 24

    24 01a.08 www.Rivatech.De appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over- ethernet (poe) standard. Ieee 802.3af allows for two power options for categor...

  • Page 25

    25 01a.08 www.Rivatech.De power classification the poe power class supported by the ip device is class 0. Class usage minimum power levels output at the pse maximum power levels at the powered device 0 default 15.4w 0.44 to 12.95w unlike the other way, disconnecting pse or poe doesn’t reboot the dev...

  • Page 26

    26 01a.08 www.Rivatech.De appendix (c): dimensions (unit: mm).

  • Page 27

    27 01a.08 www.Rivatech.De appendix (d): hexadecimal- decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0a 10 0b 11 0c 12 0d 13 0e 14 0f 15 10 16 11 17 12 18 13 19 14 20 15 21 ...

  • Page 28

    28 01a.08 www.Rivatech.De revision history man# date(m/d/y) comments 01a.01 03/05/2012 created 01a.02 03/13/2012 modified poe compatibility, with power adaptor 01a.03 05/02/2012 modified power, reset, and factory default 01a.04 06/01/2012 power consumption, illumination variable update 01a.05 06/12/...