Rival FRRVMN01 Owner's Manual - page 3
NOTE: Never touch the blade at any point during use of this
unit.
1. Remove top cover by unscrewing
counter-clockwise.
2. Pour ice-cubes into the unit leaving
about half an inch from the top.
3. Place the top cover back with slight
pressure to force the spring to stretch
and then twist clockwise to lock in
place, all in one motion.
4. Place plastic cup under the unit to
catch shaved ice
NOTE: Hold unit firmly when in use
5. Hold Lever and rotate in clockwise motion (while holding
the unit) to grind the ice.
6. Clean all excess ice/water from unit after use.
NOTE: Occasionally ice may build up and will get lodged in the
chute.
If ice is not coming out of the chute gently shake the unit to
ensure the ice is not frozen together.
CAUTION: Do not allow children to operate this appliance.
The Ice Shaver is for household use only. Do not attempt to
sharpen the BLADE.
HOW TO USE YOUR MANUAL SNOW CONE MAKER
HOW TO CLEAN YOUR MANUAL SNOW CONE MAKER
-E4-
-E5-
CAUTION: The stainless steel BLADE is very sharp. Never
attempt to touch the tip of the BLADE when operating,
assembling, disassembling, or cleaning.
1. Unlock the cover by rotating counter-clockwise. Lift to
remove.
2. (Optional) You may rinse unit through by spraying it with
water.
3. Wipe down all parts and surfaces with clean damp cloth.
4. Make sure all components are completely dry before
storage.
CAUTION: Do not soak in water.
Questions? Please contact us at
www.rivalproducts.com or at 1.800.557.4825.
FRRVMN01_11ESM1.indd 5-6
9/30/11 4:25 PM