Rival multiprocess 175 Operating Manual - page 3
04
05
EN
Multiprocess 175. Operating manual.
Multiprocess 175. Operating manual.
Contents.
Page
03 Welcome to a better way of welding
06 1. Recommended safety precautions
1.1 Health hazard information
1.2 Personal protection
1.3 Cylinder safety
1.4 Electrical shock
1.5 User responsibility
08 2. Metal Inert Gas & Metal Active Gas
arc welding (MIG/MAG)
2.1 Introduction to Metal Inert Gas (MIG)
& Metal Active Gas (MAG)
2.2 Introduction to Flux-Cored Arc Welding (FCAW)
2.3 Introduction to Metal-Cored Arc Welding (MCAW)
2.4 Modes of metal transfer
2.5 Fundamentals of MIG/MAG, FCAW and MCAW
15 3. Gas Tungsten Arc Welding (GTAW/TIG)
3.1 Introduction
3.2 Process
3.3 Process variables
3.4 Shielding gas selection
3.5 Consumable selection
3.6 Non-consumable tungstens –
tungsten electrode selector chart
Page
18 4. Manual Metal Arc Welding (MMAW)
4.1 Introduction
4.2 Process
4.3 Welding machine
4.4 Welding technique
4.5 Electrode selection
4.6 Types of joints
21 5. General welding information
5.1 Recommended welding parameters for MIG/MAG
22 6. Package contents
23 7. Multiprocess 175 installation
7.1 Installation for MIG/MAG process
7.2 Installation for TIG setup
7.3 Installation for MMA process
25 8. Control panel
26 9. Multiprocess 175 operation
9.1 Starting up
9.2 Operation for MMA mode
9.3 Operation instruction under LIFT TIG mode
9.4 Data selection
9.5 Polarity selection
9.6 Operation instruction under MIG mode
Page
30 10. Technical specifications
31 11. Troubleshooting guide
11.1 TIG/MMA functions
11.2 MIG/MAG functions
35 12. Periodic maintenance
12.1 Daily maintenance
12.2 Regular power source maintenance
36 13. Warranty information
13.1 Terms of warranty
13.2 Limitations on warranty
13.3 Warranty period
13.4 Warranty repairs
37 14. Recommended safety guidelines