- DL manuals
- RJE
- Marine Equipment
- ULB-362/18
- User Manual
RJE ULB-362/18 User Manual
Summary of ULB-362/18
Page 1
Ulb-362b ulb362/pl series underwater locator beacon user’s manual january 2018 p/n: 362-17001-a rje international, inc 15375 barranca parkway suite i-112 irvine, california, 92618 u.S.A. Www.Rjeint.Com tel: +1-949-727-9399 fax: +1-949-727-0070 e-mail: sales@rjeint.Com rje international, inc..
Page 2: Preface
Ulb-362b underwater locator beacon i user’s manual january 2018 preface this manual describes the installation and operation of the ulb-362b series underwater locator beacons used for marking underwater locations, equipment and subsea vehicles. This manual is divided into the following six sections:...
Page 3: Table Of Contents
Ulb-362b underwater locator beacon ii user’s manual january 2018 table of contents 1 description ....................................................................................................................... 1 external construction...............................................................
Page 4: List of Figures
Ulb-362b underwater locator beacon iii user’s manual january 2018 list of figures figure 1-1 ulb-362b/37 ............................................................................................................... 1 figure 1-2 installed in mounting bracket ...........................................
Page 5: Description
Ulb-362b underwater locator beacon 1 user’s manual january 2018 1 description this section provides a general descriptive overview of the beacon, its theory of operation, and use. The ulb-362b series underwater locator beacons are durable, water-activated, underwater location aids. A power loss vers...
Page 6: External Construction
Ulb-362b underwater locator beacon 2 user’s manual january 2018 figure 1-2 installed in mounting bracket external construction the beacon is contained in a water-tight aluminum case capable of withstanding high-impact shock and deep-water immersion. As shown in figure 1-2, one of the end caps has a ...
Page 7: Internal Construction
Ulb-362b underwater locator beacon 3 user’s manual january 2018 internal construction the major internal components of the beacon include a printed circuit board assembly, a urethane-encapsulated transducer assembly, and a battery. The battery is contained in its own, separate, user accessible compa...
Page 8: Specifications
Ulb-362b underwater locator beacon 4 user’s manual january 2018 2 specifications ulb-362b/27, ulb-362b/37, ulb-362b/45 specifications ulb-362pl/b37 27, 37.5, 45 khz, + 1 khz operating frequency: 37.5 khz, + 1 khz 0 to 20,000 feet (6,096 meters) operating depth: 0 to 20,000 feet (6,096 meters) ≥ 9 ms...
Page 9: Installation and Checkout
Ulb-362b underwater locator beacon 5 user’s manual january 2018 3 installation and checkout this section encompasses the installation considerations and procedures for mounting the beacon using the mounting bracket kit, and a pre-deployment test that can be conducted using a digital voltmeter. Insta...
Page 10: Ulb362-02 Mounting Bracket
Ulb-362b underwater locator beacon 6 user’s manual january 2018 installation procedures for ulb-362b and ulb362-02 mounting bracket carefully unpack the beacon and inspect it for shipping damage. If any damage is evident, it should be reported to the freight carrier and to rje international, inc. If...
Page 11
Ulb-362b underwater locator beacon 7 user’s manual january 2018 figure 3-2 securing the mounting bracket figure 3-3 installing the beacon into the mounting bracket.
Page 12
Ulb-362b underwater locator beacon 8 user’s manual january 2018 installation procedures for ulb-362/pl carefully unpack the beacon and inspect it for shipping damage. If any damage is evident, it should be reported to the freight carrier and to rje international, inc. To mount the beacon, perform th...
Page 13: Pre-Deployment Tests
Ulb-362b underwater locator beacon 9 user’s manual january 2018 pre-deployment tests a pre-deployment test on each beacon should be performed before and after mounting. Short out the water switch and use a acoustic pinger receiver to determine that the beacon is functioning. For the ulb-362b series ...
Page 14: Beacon Maintenance
Ulb-362b underwater locator beacon 10 user’s manual january 2018 4 beacon maintenance this section covers the cleaning, recommended testing interval, disposal, storage procedures, and battery replacement for the ulb-362b series underwater locator beacons. Beacon cleaning the end cap with the water s...
Page 15: Beacon Disposal
Ulb-362b underwater locator beacon 11 user’s manual january 2018 warning: hazardous chemicals are used in the beacon battery. Dispose of the battery in accordance with local regulations. Use the battery replacement procedure provided with the lithium battery replacement kit p/n b362-b30-01 or b362-a...
Page 16: Return Procedures
Ulb-362b underwater locator beacon 12 user’s manual january 2018 5 return procedures if you need to return an ulb-362b underwater locator beacon for warranty service, contact rje international, inc. For a case number and shipping instructions. Rje international, inc. Tel: +1-949-727-9399 fax: +1-949...
Page 17: Warranty
Ulb-362b underwater locator beacon 13 user’s manual january 2018 6 warranty limited warranty. Rje international, inc. Warrants that the products sold hereunder shall be free from defects in materials and workmanship under normal use and service when correctly installed, used and maintained for a per...