RMA Shopride Napoli S-787L User Manual - page 5
ADJUSTMENTS
Seat Removal
Fold down the back of the seat. Unscrew the
hand knob under the seat and remove from
the seat post.
Seat Height Adjustment
Remove seat as described above. Slacken the
lower hand knob. The seat height can be
adjusted to 2 different settings by inserting
the steel locking pin into the required hole.
Re-tighten lower hand knob and replace seat.
Folding the Tiller
Fold down the tiller by loosening the hand
knob located at the base of the tiller stem.
Free Wheeling Operations
The free wheel release lever is located inside
the left rear wheel to disengage the motor lift
up leaver (the scooter can now be pushed), to
re-engage the motor push down on the leaver.
The scooter when switched to the on position
will bleep if the scooter is in free wheel
mode, do not depend on this audible warning
if the batteries are exhausted there may be no
sound please check manually.
Warning – Always re-engage the free
wheeling device after use.
Failure to do so may result in injury
Fig. 3
Fig. 2