RME Audio ADI-1 User Manual

Summary of ADI-1

  • Page 1

    User's guide high quality 20 bit / 48 khz stereo ad/da converter ®.

  • Page 2

    User's guide adi-1 © rme 2 contents 1 introduction ................................................................. 2 2 supplied contents....................................................... 2 3 power supply .............................................................. 2 4 brief description and ...

  • Page 3

    User's guide adi-1 © rme 3 4. Brief description and characteristics the adi-1 is a compact 2-channel analog to digital and digital to analog converter in a half rackspace enclosure. Ad- and da-circuit can be used completely independent from each other. Newest 20 bit converters using 128 times oversa...

  • Page 4

    User's guide adi-1 © rme 4 6. Usage 6.1 analog to digital connect your analog signal source with the adi's xlr or trs input jacks. First adjust the knobs fully counter clockwise and try to achieve an optimal input level by toggling the 'operating level' switch. Fine adjusting the input level can eas...

  • Page 5

    User's guide adi-1 © rme 5 6.2 digital to analog the digital input of the adi-1 works fully self adjusting and needs no setting of bit resolution, format (professional/consumer) or sample frequency. Only the active input has to be chosen (optical or cinch). Use the switch 'select digital input' on t...

  • Page 6

    User's guide adi-1 © rme 6 7.2 digital input the digital input of the adi-1 accepts all common digital sources as well as spdif and aes/ebu. Channel status (consumer/professional) and copy protection will be ignored. The adi-1 also ignores all emphasis information. As pre- and deemphasis hasn't been...

  • Page 7

    User's guide adi-1 © rme 7 9. Controls and connectors front panel rear panel peak input level d/a-converter a/d-converter input gain -60 -30 -20 -3 ovr right 32 44.1 48 32 44.1 48 error select -6 -10 db db dbfs analog / digital interface adi-1 hi-performance 20 bit a/d - d/a converter left sample ra...

  • Page 8

    User's guide adi-1 © rme 8 10. Warranty before shipping each adi-1 is tested by rme in a complete test sequence. Using only the best hi-grade components allows us to offer two years of warranty. The copy of the sales receipt or the bill of sale is your warranty legitimation. In case of any error or ...

  • Page 9

    User's guide adi-1 © rme 9 ce this device has been tested and found to comply with the limits of the european council directi- ve on the approximation of the laws of the member states relating to electromagnetic compatibi- lity (89/336/eec) according to en 55022 class b. Fcc compliance statement cer...