RMS Gill 4 Seating System EDTION TWO 2012 User Manual - Initial Installation
INITIAL INSTALLATION
The information contained in this User Manual, relates to the Gill 4 Seating
System being interfaced with an appropriate sized Otto Bock Discovery
wheelbase, fitted with an M30 Parallel Adapter Frame.
IMPORTANT NOTES:
The Gill 4 Seating System and Discovery wheelbase, when supplied as
a “G4—Disco Package”, will be assembled ready to be interfaced
together. However, the installer should note that whilst the Gill 4 and
Discovery will leave RMS Ltd set to the specifications detailed on the
original assessment prescription, some minor adjustments of either the
Seat or Backrest components may be necessary to ensure the final
correct seating support is achieved.
Any reference to Left or Right in this manual, will refer to the Left or
Right side when sitting forward facing in the Seat Unit.
Gill 4
—Discovery Compatibility:
Where a Gill 4 Seating System is
supplied for use with a currently owned
Discovery
wheelbase,
it
will
be
necessary to ensure that the correct
*Interface Parallel Adapter, as detailed
below, is securely installed onto the
wheelbase in the most suitable position.
Gill 4 size 1
— 36cm Discovery only.
Use RMS G4 size 1 interface with
*M30 Parallel Adapter HR32048200
Gill 4 size 2
— 40cm Discovery only.
Use RMS G4 size 2 interface with
*M30 Parallel Adapter HR32048300
Gill 4 size 3
— 45cm Discovery only.
Use RMS G4 size 2 interface with
*M30 Parallel Adapter HR32048400
NOTE:
Whilst Figs.2, 3 and 4 give examples of
the Parallel Adapters fitted to three sizes
of Discovery wheelbases, some slight
adjustment of these may be necessary
where stability becomes an issue
created by changes in the user’s
disability.
5
Fig. 2
Fig. 3
Fig. 4
36cm Discovery
40cm Discovery
45cm Discovery