1 500 scale fuselage airwolf instruction manual produced by:.
2 table of contents additional items required……………. Adhesives and building supplies….. Disclaimer…………………………………… parts sheet………...………………………. Initial setup…………….……………… installing the mechanics…………….. Final steps………………………………….. Flying characteristics…………………. 2 2 2 3 4 5 7 8 introduction: thank you for ...
3 assistance in person or property damage. We strongly recommend you attain a membership with the ama. The contact information for the ama is: academy of model aeronautics. 5161 e. Memorial dr. Muncie in 47302 (800) 435-9262 helicopter and aircraft operation requires a high degree of skill. Accident...
4 initial set up 1. Assemble the control arms and add the ball links to the arms. Attach the ball links to the control rods. 2. Attach the control arms to the control rods. Attach the small rod to the nose control arm. Attach the nose gear to the control arms with the smaller carbon fiber rod. Ensur...
5 4. Install the carbon fiber brace rod into the fuselage. Install the main retract into the fuselage as shown above. 5. Attach the control arm to the retract rod and secure. Installing the mechanics 6. Glue the wood spacers into 2 even blocks. Attach them to the bottom of the mechanics using the sk...
6 7. Detach the tail cover and place aside. Insert the mechanics into the fuselage. 8. Install the foam spacer and attach the tail case to the tail boom. Attach the tail cover to the fuselage. 9. Secure the mechanics to the fuselage using the screws provided. Attach the vertical fin to the tail of t...
7 10. Install the retract servo to the nose of the fuselage and connect the ball link to the retract system. Final steps 11. Glue the horizontal stab to the tail of the fuselage using epoxy. Attach the vertical fins to the horizontal stabs. 12. Install the weapons to the wings of the fuselage using ...
8 13. Install the weapons cap to the weapons. Install the windshield to the fuselage body..
9.
10 flying charachteristics since this fuselage adds weight to the helicopter we advise that you do not attempt any 3d maneuvers to ensure the integrity of the helicopter. With the added weight the blades may come into contact with the fuselage and destroy the helicopter if any were attempted. The fu...
