Roadhawk Ride RIDE Bullet Camera system User Manual
Summary of RIDE Bullet Camera system
Page 1
User manual ride digital rider protection camera.
Page 2
02 contents contents contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 in the box . . . . . . . . . . . . . . . . . ...
Page 3
Introduction 03 ride thank you for purchasing the roadhawk ride bullet camera system. This camera has been designed to record your journey capturing both video and audio that could be used as evidence in the event of a road traffic accident. The roadhawk ride is a waterproof bullet camera system tha...
Page 4
04 features / box contents ● 720p high definition video and audio ● wide angled 135 degree lens ● waterproof design ● loop recording ● time/date stamp ● one button operation ● internal battery (90 minutes record time) ● external power input ● usb and hardwiring 12v power kit supplied ● helmet and bi...
Page 5
Warning 05 ride the roadhawk ride camera always records video on a constant loop. It records video and audio in 5 minute segments. When the sd card becomes full the camera will start to record over the earliest files. If you are involved in an accident or you capture some footage that you want to ke...
Page 6
06 explaining the cables cables 1. Camera cable 4. Camera extension cable 2. Usb cable 3. Hard wiring cable 1. The camera cable connects to the rear of the camera and provides a connection for all of the other cables supplied in the kit. 2. The usb cable connects to the camera cable and allows you t...
Page 7
Explaining the cables 07 ride the roadhawk ride camera can be powered from its own internal battery for around 90 minutes before it will require charging again. To operate the camera in this way please use the waterproof rear cap and ensure it is fitted correctly to retain the camera’s waterproof pr...
Page 8
08 explaining the camera’s leds camera’s leds 1. The camera has three small coloured leds positioned at the front of the camera near to the lens. Red = charging internal battery green = internal battery fully charged red/blue flash = camera is recording video red/blue/green flash = sd card error if ...
Page 9
Charging the camera 09 ride whenever the camera is connected to an external power supply, either an external battery, a car accessory socket, a usb mains charger or a computer, the camera will start to charge its internal battery. The red led will blink when charging and go green when it is fully ch...
Page 10
10 installing the sd card installing the sd card 1. Insert the micro sd card with the text on the card facing up and the electrical contacts facing downwards and inwards. 2. Do not force the micro sd card in to place. Gently push it with your finger nail. 3. Push the micro sd card in to the camera u...
Page 11
Installing the camera 11 ride the camera can be used on just about any bike/cycle helmet or bike fairing. Helmet mounting the camera will give the benefit of recording video in the direction the rider is looking but can also produce video with a lot of movement which may not be comfortable to watch ...
Page 12
12 installing the camera installing the camera 1: experiment with the camera and make sure you know where you want to mount it before sticking the adhesive mount in place. Once it is stuck down, it is not easy to move again. 2: ensure the area you wish to place the adhesive mount is fully clean and ...
Page 13
Recording and playback 13 ride the camera will automatically start recording video as soon as it receives power from an external source. If you want to start recording manually or if you are running the camera from its internal battery, press and hold the silver power button for 3 seconds. To stop r...
Page 14
14 setting the time/date setting the time/date the roadhawk ride camera embeds the time and date on to any video being recorded. In order to set the time and date you need to put a file on to the sd card so the camera can be set accordingly. You can either do this yourself by creating a file called ...
Page 15
Formatting the sd card 15 ride formatting your sd card is an important part of maintaining your camera. In fact, this advice can be applied to any camera using sd cards, especially those that record video and audio. Over time, the data on digital storage media such as sd cards and computer hard disk...
Page 16
16 limited warranty limited warranty statement this limited warranty shall apply to the roadhawk ride product including all accessories as contained within the original ride box “the product” . Roadhawk warrants the product from its authorized distributor and will meet the applicable product specifi...
Page 17
Limited warranty 17 ride 10. Before returning any units for service, the customer is solely responsible for backing up data and removing any confidential, proprietary, or personal information from the product. Roadhawk is not responsible for damage to or loss of any programs, data, or removal storag...
Page 18
18 notes notes.
Page 19
Specification 19 ride specification: product size: 22mm (dia) 78mm (l) usb: usb 2.0 hs physical weight: 32g resolution: 1280 x 720p video format: h.264 power duration: 1.5 to 2 hours frame rate: 30fps sensor: 3mp battery: 500mah li-poly memory: up to 32gb micro sd working temp: -5 to 40 degrees c st...