RoadPilot microGo User Manual - page 2
2. DRIVING INFORMATION SCREENS
Press button to cycle through available screens -
Speed
Shows the vehicle’s
current speed, heading
and the GPS signal
strength as a bar graph.
Rescue Me
TM
This screen contains
useful information in the
event of a breakdown,
including position and
heading.
Signal Status
The strength of the GPS
signal being received and
the number of satellites
in view. Three or more
satellites are required for
microGo to operate.
Date & Time
The date and time shown
is derived from data
transmitted from the
satellites and is extremely
accurate.
Trip
Shows the total distance
travelled (non-resettable)
and a resettable trip
counter. To reset, press
and hold the button.
Settings
Please refer to section 6
for details on settings.
3. CAMERA WARNING
If the vehicle is approaching a speed camera and is
exceeding the speed limit, microGo will sound an
audible warning (chime and voice alert) and switch to
the camera warning screen -
Speed limit
Speaker on/
mute
Current
speed
Camera
type
Range to camera
• The bars at the top indicate the relative distance to
the camera.
• At 5/10 distance, if the speed limit is still being
exceeded, microGo will give another audible
warning and continue until the vehicle slows to the
legal speed or the camera has been passed.
• The display will flash the alarm colour while the
speed camera alarm is sounding.
• Press the button to toggle audible warnings off
and on .
• The conditions under which the camera alerts are
shown depend on the settings entered in the
Warnings section of the settings (section 6.3).
4. CONGESTION CHARGE WARNING
The London Congestion Charge Zone operates
between 7am and 6:30pm Monday-Friday.
Three warnings are given by microGo within the con-
gestion charge zone hours of operation - when
approaching the charge zone, on the zone boundary
and within the zone -
- 2 -