S Audio Mia Sub 15 User Manual - General Instructions
2
S Audio Mia Sub 15 USER MANUAL
1.
GENERAL INSTRUCTIONS
1) Do not use the speakers near water.
2) Clean only with dry cloth.
3) Do not block any ventilation slots. Install in accordance with the instructions.
4) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
5) Do not defeat the safety purpose of the polarized or grounding-type plug.
6) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
7) Only use attachments/accessories specified by the manufacturer.
8) Unplug this device during lightning storms or when unused for a long period.
9) Refer all servicing to qualified service personnel. Servicing is required when the
speaker has been damaged in any way.
2.
PRECAUTIONS
When first powering up a system including brand new speaker cabinets, SAudio
recommends a gradual, minimum power ramp up for one hour. This is to stabilize
the components during the very first hours of usage. It is advisable to connect the
loudspeakers only after all the other system components have been wired and are
operating correctly. This is particularly important for amplifiers and the controller. It
is advisable to turn down all the amplifiers' gains before connecting the cabinets
and to turn them on again individually with a minimum level music source fed into
the system. The sense LEDs of the corresponding controller channel should light
up accordingly. This will help to locate wiring errors, particularly Left to Right or LF
to HF Sense line channel inversions which would disable the controller protection
circuits and may invalidate the warranty.