S.Coifman Movement Caliber 1069 Instruction Manual - page 39
of
125
76
77
Setting the Date
(Quick Mode)
➊
Pull out the crown to position 2
(the watch continues to run)
.
➋
Turn the crown counter clockwise until the correct date 1 appears.
➌
Push the crown back into position 1.
Movement Caliber :
8040.N
Please note:
During the date changing phase between 9 PM and 12 PM; the date must
be set to the date of the following day. An extreme acceleration in setting the
date with quick mode can create a false date indication. The synchronization
is re-established by setting the date from 01 till 31 (crown in position 2).
2.1
2.2
➊
➌
➋
SETTINGS