Vm4hd installation and user guide 1.
Table of contents overview.................................................................................... 3 connecting to a display device..................................................3 connecting an external video source........................................4 connecting to a network........
• use only the power source marked on the unit. • do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other, a grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for ...
Overview the vm4hd is a network enabled high definition digital signage device capable of generating dynamic video content based on user defined presentations. The vm4hd connects to any display device that accepts standard definition (sd), enhanced definition (ed) or high definition (hd) video via t...
Vm4hd will output composite video. 4. Composite output the composite output of the vm4hd is capable of sending sd video signals only. When composite output is chosen, any of the three video output connectors may be used to output a composite video signal. Connecting an external video source the vm4h...
Once programmed with a presentation, the vm4hd will operate unassisted. When power is applied, the presentation will automatically start. When power is removed, the presentation stored in flash memory is safe. If the vm4hd is playing a presentation, it should be paused before removing the memory dev...
Display device. Turn on the vm4hd, and wait for it to boot, approximately 30 seconds. Press the button to display the vm4hd setup menu as shown below. Use the and buttons to navigate the menu. Press the button to enter a sub-menu, and press the button to exit a sub-menu. Press the button from anywhe...
Setting the network options the vm4hd supports dhcp, a widely supported network configuration protocol. When dhcp is enabled, the vm4hd will automatically configure the ethernet interface. If it is disabled, the vm4hd will use the network configuration defined in the setup menu. Note – only advanced...
Hardware specifications video output 3 x bnc component ypbpr, s-video, or composite 1v, 75 ohm source termination 1 x hdmi type-a full size video input 3 x bnc component ypbpr 1v, 75 ohm terminated internally audio input 2 x bnc 2v, 10k ohm stereo, line level audio output 2 x bnc 2v, 220 ohm stereo,...
Warning on copyrights and product usage. Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. S&s research inc. Is not responsible for materials supplied by third party vendor...
Declaration of conformity trade name: s&s research inc. Model no.: video messenger vm4hd responsible party: s&s research inc. Address: 89 access rd.#10 norwood ma. U.S.A. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not...
