1. DL manuals
  2. S-WORKz
  3. Motorized Toy Car
  4. S350 BK1
  5. Instruction Manual

S-WORKz S350 BK1 Instruction Manual

Summary of S350 BK1

  • Page 1

    Instruction manual 2801962 sbk1 buggy.Indd 1 2011/6/8 下午 04:59:29.

  • Page 2

    2 instruction specification length: 530mm width: 308mm height: 220mm ground clearance: 70mm wheelbase: 318-323mm track: f:306mm / r:306mm gear ratio: c:46/13t, f/r 43/13t weight: 3350g the s-workz s350 bk1 pro kit comes with loads of s-workz factory team optional parts that add strength and performa...

  • Page 3: Warranty

    3 warranty your s-workz s350 bk1 kit warranty covers workmanship and manufacturing defects of the original and unmodified parts. Warranty claims resulting from crashes, abuse, improper operation, improper mounting, improper adjustment or lack of maintenance will not be honored. Contact your local ho...

  • Page 4

    4 index this radio controlled racing car is not a toy! This high-performance r/c model is recommended for ages 14 and older. Instruction 2 warranty 3 required equipment for operation 5 explosion view with key no 6-13 operation guide / safety precautions 14 assembly steps 15-46 set-up sheet 47 blank ...

  • Page 5

    5 starter box engine starting equipment glow double-sided tape paint long nose pliers modeling knife instant cement thread lock included items hex wrench 1.5mm 2mm 2.5mm 1.5mm 2mm 2.5mm fuel bottle glow plug wrench screwdriver screwdriver radio gear nitro fuel stick type throttle servo receiver batt...

  • Page 6

    6 104004 m3x3mm set screw x14 105005 m3x12mm cap screw x6 105006 m3x28mm cap screw x4 105004 m2.6x6mm cap screw x8 105001 m3x8mm cap screw x1 108013 m4x8mm fh/st hex screw x1 108012 m4x16mm fh/st hex screw x8 108011 m4x12mm fh/st hex screw x4 108010 m4x10mm fh/st hex screw x2 106010 m3x6mm hex soket...

  • Page 7

    7 101010 m3 countersunk washer x4 101020 3mm countersunk washers (rd) x6 116010 ball bearing 5x10x4mm x2 101013 3mm spring washer x4 116006 ball bearing 8x16x5mm x14 116012 ball bearing 15x21x4mm x4 116004 ball bearing 6x10x3mm x4 117003 flange ball bearing 3x6x2.5mm x2 200135 rear wheel axle insert...

  • Page 8

    8 330109 f/r drive shaft 93.5mm x4 115004 servo saver spring x1 115013 shock spring 1.6mm (s) x2 115014 shock spring 1.6mm (l) x2 330162 s-system cvd draft shaft 82.5mm x1 330163 s-system cvd draft shaft 111mm x1 330113 servo saver shaft x2 330114 servo saver post x1 330132 shock shaft (l) x2 330133...

  • Page 9

    9 320003 diff. Bevel gear 18t x6 320004 diff. Bevel gear 10t x12 330104 brake cam (s) x1 330105 brake cam (l) x1 330160 s-system pinion gear 13t x2 200186 throttle linkage holder x1 330097 shock piston 1.3mmx5 holes x4 330110 cvd join x6 330116 14mm knuckle pivot ball x4 330156 adjuster knob x4 3301...

  • Page 10

    10 330152 aluminum rear chassis brace x1 330100 engine mount (l) x1 330101 engine mount (r) x1 330153 aluminum front chassis brace x1 330088 s350 rear lower arm holder x1 330086 s350 front lower suspension plate x1 330014 front/rear diff. Outdrive x4 330017 center diff. Outdrive x2 330112 cvd axle x...

  • Page 11

    11 sw-2501093 s350 front lower arm set (l&r) x1 sw-2501098 s350 front steering knuckle set (l&r) x1 sw-2501113 s350 front upper arm set (l&r) x1 sw-2501121 s350 ball end set with shock plastic parts (2 set) x2 sw-2501114 s350 gear box set (f&r) x2 sw-2501096 s350 full arm holder set (7pc) x1 sbk1 bu...

  • Page 12

    12 sw-210002 center diff. Mount (lower)(upper) x2 sw-2501100 s350 pivot ball cup caster insert set x4 x1 sw-2501117 s350 radio box set sw-2501122 s350 settring bellcrank set with servo horn set x1 sw-2501123 s350 side guard set (l&r) x1 top view sw-210003 fuel tank x1 side view x3 sw-210002 diff. Ca...

  • Page 13

    13 sw-2501095 s350 rear hub carrier set (l&r) x1 sw-2501094 s350 rear lower arm set (l&r) x1 sw-2501115 s350 rear lower arm dusty cover with fuel sprinkle guard x1 sw-2501099 s350 r/f insert brake throttle linkage linkage holder x2 sw-2501126 ail filter set x1 sw-2501116 s-workz high done force wing...

  • Page 14

    14 operation guide safety precautions safety precautions the s-workz s350 bk1 is a high performance radio controlled model which needs to be operated with caution and common sense. The s350 bk1 pro kit is not intended for children under the age of 14 without adult supervision. S-workz shall not be h...

  • Page 15

    15 bag b 1 2 330014 116006 330015 320003 420002 108003 101004 320004 320004 320004 330013 610002 101004 210002 116006 330014 330164 330015 320003 400002 330015 pin m2.2x9.9mm x4 400002 o-ring s5 4.8x1.5 x4 116006 ball bearing 8x16x5mm x4 101004 washer 3.5x10x0.2mm x8 108003 m3x10mm fh/st hex screw x...

  • Page 16

    16 4 3 bag c 116006 330017 330015 320003 420002 108003 101004 320004 330013 610002 320004 101004 210002 116006 330017 330018 330015 320003 400002 108003 m3x10mm fh/st hex screw x4 116006 ball bearing 8x16x5mm x2 330015 pin m2.2x9.9mm x2 400002 o-ring s5 4.8x1.5 x2 101004 washer 3.5x10x0.2mm x4 33001...

  • Page 17

    17 5 6 bag d the standard front lower arm holder (200102) can offer 0° kick-up for your front lower suspension. You may use the optional one (200103) to get 1° kick-up for your front lower suspension. 200102 front lower arm holder (0 degree) 200103 front lower arm holder (1 degree) please use the sh...

  • Page 18

    18 7 8 bag d please use the shim 13x16x0.2mm to adjust when the play was bigger between the crown gear and pinion gear. The rear lower arm plates can offer 2.5~3.0 rear toe-in with 0°~1° kick-up for your rear lower suspension. 200104rear lower arm plate (0-2.5 d) 200105rear lower arm plate (0-3.0 d)...

  • Page 19

    19 9 10 bag e 200101 104004 104004 115008 330103 200110 200110 200134 200134 1.5mm 330103 front/rear lower arm hingpin x2 104004 m3x3mm set screw x2 use a 2mm hex wrench and slowly tighten the hinge pins. Pop in the stabilizer guide. Sbk1 buggy.Indd 19 2011/6/8 下午 04:59:49.

  • Page 20

    20 12 11 bag e 330116 108003 330093 200124 200124 330118 330094 330115 105004 104005 104005 m3x4mm set screw x2 105004 m2.6x6mm cap screw x2 330115 steering knuckle pivot ball turnbuckle x4 108003 m3x10mm fh/st hex screw x4 screw and adjust 330118 knuckle pivot ball nut so as the pivot ball can be m...

  • Page 21

    21 13 14 bag e 200171 108003 108003 106002 330091 103001 200125 200126 200126 108001 330110 330112 330111 330109 116012 116006 330124 330121 104001 104001 m5x4mm set screw x2 330111 pin m2.5x14.8mm x2 330124 pin m3.0x16.8mm x2 116012 ball bearing 15x21x4mm x2 116006 ball bearing 8x16x5mm x2 103001 m...

  • Page 22

    22 16 15 bag e 200128 200127 200134 330087 330117 330117 108001 200133 330119 200133 330119 108001 m3x12mm fh/st hex screw x4 330119 front upper arm hingpin x2 330117 knuckle pivot ball washer x2 sbk1 buggy.Indd 22 2011/6/8 下午 04:59:54.

  • Page 23

    23 17 18 bag g 108001 116004 330113 101019 106002 106002 117003 117003 330092 101012 101012 330135 115004 106004 200117 200116 330114 200118 103001 103001 106004 103001 m3 nut lock x2 106002 m3x10mm hex soket oh/tp screw x2 101012 m3x6xt0.6mm x2 117003 flange ball bearing 3x6x2.5mm x2 108001 m3x12mm...

  • Page 24

    24 20 19 bag e 200119 200170 108001 330089 108001 200172 104007 200132 106005 330136 200158 330134 104007 m4x8mm set screw x2 106005 m3x15mm hex soket oh/tp screw x2 108001 m3x12mm fh/st hex screw x5 place the “f” side facing the front. Sbk1 buggy.Indd 24 2011/6/8 下午 04:59:57.

  • Page 25

    25 21 22 bag e 106010 200101 104004 104004 105005 330103 330103 200133 200133 330103 front/rear lower arm hingpin x2 104004 m3x3mm set screw x2 106010 m3x6mm hex soket oh/tp screw x2 pop in the stabilizer guide. Use a 2mm hex wrench and slowly tighten the hinge pins. (check page 19) sbk1 buggy.Indd ...

  • Page 26

    26 24 23 bag e 330121 330110 330109 330111 116012 330112 116006 330124 104001 105004 104005 104005 104005 m3x4mm set screw x2 105004 m2.6x6mm cap screw x2 330124 pin m3.0x16.8mm x2 104001 m5x4mm set screw x2 330111 pin m2.5x14.8mm x2 116012 ball bearing 15x21x4mm x2 116006 ball bearing 8x16x5mm x2 s...

  • Page 27

    27 25 26 bag f 330120 106010 200136 200135 106010 330120 200135 200136 330125 200138 330123 200137 330125 330120 rear hub carriers hing pin x2 106010 m3x6mm hex soket oh/tp screw x2 200135 rear wheel axle insert (1mm) x4 200136 rear wheel axle insert (2mm) x2 330123 rear upper sus. Arm turnbuckles x...

  • Page 28

    28 28 27 bag f 200156 200155 106010 106010 103003 106003 105011 103001 103001 105011 103003 106003 m3x16mm hex soket oh/tp screw x2 103001 m3 nut lock x2 103003 flange m3 nut lock x2 105011 m3x23mm cap screw x2 106010 m3x6mm hex soket oh/tp screw x4 sbk1 buggy.Indd 28 2011/6/8 下午 05:00:04.

  • Page 29

    29 29 31 30 bag h 610004 300016 106007 200112 108006 200114 106009 300016 300016 200113 200114 108006 108006 200115 104004 330106 104004 330090 200115 330105 330106 330104 106007 m3x12mm hex soket oh/tp screw(ht) x4 108006 m3x8mm fh/st hex screw x4 104004 m3x3mm set screw x2 108006 m3x8mm fh/st hex ...

  • Page 30

    30 33 32 bag h 106010 200159 106010 108014 108014 108014 108014 200160 330099 108001 108012 108001 103001 200111 108012 330153 103001 108010 108003 106010 m3x6mm hex soket oh/tp screw x8 108014 m3x3mm fh/st hex screw x4 108001 m3x12mm fh/st hex screw x2 103001 m3 nut lock x2 108010 m4x10mm fh/st hex...

  • Page 31

    31 34 35 bag h 103001 108012 108001 330152 106006 103001 108011 108011 m4x12mm fh/st hex screw x4 103001 m3 nut lock x2 108001 m3x12mm fh/st hex screw x1 108012 m4x16mm fh/st hex screw x4 106006 m3x20mm hex soket oh/tp screw x1 sbk1 buggy.Indd 31 2011/6/8 下午 05:00:12.

  • Page 32

    32 37 36 bag f 103001 108009 103001 108009 330127 330126 200139 330127 200140 330126 steering turnbuckle x2 103001 m3 nut lock x4 108009 m3x20mm fh/st hex screw x4 sbk1 buggy.Indd 32 2011/6/8 下午 05:00:15.

  • Page 33

    33 38 39 bag i 106010 200173 108006 106008 106008 servos are not included in the kit. 106002 108003 200191 200174 200190 108006 106008 m3x12mm hex soket oh/tp screw x8 108006 m3x8mm fh/st hex screw x2 106010 m3x6mm hex soket oh/tp screw x3 108006 m3x8mm fh/st hex screw x1 108003 m3x10mm fh/st hex sc...

  • Page 34

    34 41 40 bag i 200191 108007 ※ come with radio ※ receiver switch receiver and switch are not included in the kit. 410024 108007 m3x6mm fh/st hex screw x4 install the rubber switch cover. Sbk1 buggy.Indd 34 2011/6/8 下午 05:00:19.

  • Page 35

    35 42 43 bag i battery is not included in the kit. 108003 200193 420010 108003 108003 m3x10mm fh/st hex screw x2 sbk1 buggy.Indd 35 2011/6/8 下午 05:00:20

  • Page 36

    36 45 44 bag g 330134 200179 330155 330134 200179 106005 103001 200175 101014 108006 108006 108006 m3x8mm fh/st hex screw x8 330155 steering servo turnbuckle (m3x30mm) x1 103001 m3 nut lock x1 106005 m3x15mm hex soket oh/tp screw x1 101014 m3 pivot ball bushing x1 sbk1 buggy.Indd 36 2011/6/8 下午 05:0...

  • Page 37

    37 46 47 bag g bag m 200192 105004 106002 200167 108006 200162 106002 200157 200157 200161 106002 108006 106007 103001 103001 m3 nut lock x1 106007 m3x12mm hex soket oh/tp screw(ht) x1 108006 m3x8mm fh/st hex screw x1 105004 m2.6x6mm cap screw x1 108006 m3x8mm fh/st hex screw x2 106002 m3x10mm hex s...

  • Page 38

    38 49 48 bag j 105005 101013 101013 101013 330100 330101 330012 330008 330009 105005 108003 108003 105005 m3x12mm cap screw x4 101013 3mm spring washer x4 108003 m3x10mm fh/st hex screw x2 sbk1 buggy.Indd 38 2011/6/8 下午 05:00:26.

  • Page 39

    39 50 51 52 bag j 330006 330006 101017 330006 115003 101017 101017 116010 101015 101015 330137 116010 101012 105001 104008 330140 115011 108013 not included not included 105007 115003 115003 101015 m5x8xt0.4mm x5 116010 ball bearing 5x10x4mm x2 105001 m3x8mm cap screw x1 101012 m3x6xt0.6mm x1 101017...

  • Page 40

    40 54 55 53 bag i linkage adjustment turn on the transmitter and receiver. Set the throttle servo trim in neutral. Adjust the idle adjustment screw to make the carburettor opening no more than 1mm. Adjust the position of servo horn. Check that it operates smoothly without making the operation of the...

  • Page 41

    41 56 57 58 bag k 115013 shock spring 1.6mm (s) x2 115014 shock spring 1.6mm (l) x2 400005 200150 330131 330134 330139 410022 200148 330129 330128 400010 400009 400006 330096 330130 330095 101011 330097 200149 103004 330132 shock shaft (l) x2 330133 shock shaft (s) x2 330095 shock washer 3.6x7x1mm x...

  • Page 42

    42 60 59 bag k 106005 103003 103003 106005 106005 103003 103003 330138 330138 101010 101010 105006 105006 105006 105006 m3x28mm cap screw x4 103003 flange m3 nut lock x4 106005 m3x15mm hex soket oh/tp screw x4 sbk1 buggy.Indd 42 2011/6/8 下午 05:00:43.

  • Page 43

    43 61 62 63 bag e 200147 200147 105005 200141 106006 106006 108001 101020 108001 103001 103001 200144 200143(r) 200146(r) 200145(l) 200142(l) 103001 101020 103001 m3 nut lock x4 108001 m3x12mm fh/st hex screw x4 101020 3mm countersunk washers (rd) x4 106006 m3x20mm hex soket oh/tp screw x4 105005 m3...

  • Page 44

    44 65 64 bag l 420011 420011 108006 200164 610005 610004 200163 410023 540003 540003 108006 m3x8mm fh/st hex screw x1 sbk1 buggy.Indd 44 2011/6/8 下午 05:00:50

  • Page 45

    45 66 67 bag e 106010 330122 200022 330122 200022 106010 200151 200152 200153 200154 330122 wheel nut x4 106010 m3x6mm hex soket oh/tp screw x12 sbk1 buggy.Indd 45 2011/6/8 下午 05:00:55.

  • Page 46

    46 68 115019 250004 115019 sbk1 buggy.Indd 46 2011/6/8 下午 05:00:58.

  • Page 47

    47 w w w. S w o r k z . C o m 2 1 best lap: race time / lap: name: date: track: track conditions size: traction: surface: open high smooth med. Bumpy low tight med. Med. Diff. Oil front: center: rear: # # # engine type: gasket: plug: mm muffler: fuel: tire front type: foam: rear foam: type: clutch c...

  • Page 48

    48 w w w. S w o r k z . C o m 2 1 best lap: race time / lap: name: date: track: track conditions size: traction: surface: open high smooth med. Bumpy low tight med. Med. Diff. Oil front: center: rear: # # # engine type: gasket: plug: mm s-power s3 20000 3000 450cps black 10 0 2 4 n/a 1 2.8 3 1 0 0 4...

  • Page 49

    49 200022wh 1/8 ufo competiton wheel set 4 sw-200022wh 210002 diff case with matel part 3 sw-210002 210003 fuel tank 1 sw-210003 200120 front lower arm (l) 1 sw-2501093 200121 front lower arm ( r ) 1 sw-2501093 200131 rear lower arm (l) 1 sw-2501094 200132 rear lower arm ( r ) 1 sw-2501094 200129 re...

  • Page 50

    50 item no. Part name sw-200022wh s-workz 1/8 ufo competiton wheel set sw-210002 s350 diff. Case set sw-210003 s350 fuel tank set sw-2501093 s350 front lower arm set (l&r) sw-2501094 s350 rear lower arm set (l&r) sw-2501095 s350 rear hub carrier set (l&r) sw-2501096 s350 full arm holder set (7pc) sw...

  • Page 51

    51 item no. Part name spare part list item no. Part name sw-330138 shock cap stud sw-330139 shock cap sw-330140 pipe holder sw-330152 aluminum rear chassis brace sw-330153 aluminum front chassis brace sw-330154 caron fiber radio tray sw-330155 steering servo turnbuckle (m3x30mm) sw-330160 s-system p...

  • Page 52

    Tel:+886-3-538-7638 fax:+886-3-538-7328 1f., no.18, aly. 32, ln. 251, niupu e. Rd., xiangshan dist., hsinchu city 300, taiwan (r.O.C.) speedmaster hobby co., ltd. Sbk1 buggy.Indd 52 2011/6/8 下午 05:01:03.