S2Konnect N-2020SX User Manual

Manual is about: 1000Base-SX Dual Port Server Adapter, PCI-X, 2 Fiber LC

Summary of N-2020SX

  • Page 2: S2Konnect N-2020Sx

    S2konnect n-2020sx s2konnect n-2020sx 1000base-sx dual port server adapter, pci-x, 2 fiber lc user manual 2.

  • Page 3

    S2konnect n-2020sx 3 copyright © s2konnect gmbh, 2010. All rights reserved. This manual refers to the s2konnect n-2020sx 1000base-sx dual port server adapter, pci-x, 2 fiber lc. Contents are subject to change without notice. Product and brand names are (registered) trademarks of their appropriate ow...

  • Page 4: Conventions

    S2konnect n-2020sx 4 conventions the following conventions apply to this manual. Warnings and notes used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury. Example: dangerous voltage. Used to indicate a potentially hazardous situation which,...

  • Page 5: Table of Contents

    S2konnect n-2020sx 5 table of contents conventions 4 warning notes 4 safety precautions 7 avoiding injuries - avoiding damage 7 1 introduction 9 2 system requirements 9 3 installation of the network adapter 9 4 connection of the network adapter 11 transmission distances 11 connection to the network ...

  • Page 6: Table of Figures

    S2konnect n-2020sx table of figures figure 1: insertion of the adapter into the computer figure 2: connection of fiber-optics cables/plugs figure 3: possible network configurations / connection options figure 4: location of the leds figure 5: setup for loopback wrap plug testing 6.

  • Page 7: Safety Precautions

    S2konnect n-2020sx 7 safety precautions to protect yourself from injuries and avoid damage of the device, always observe the following safety instructions when installing the network adapter. Avoiding injuries electrical current! Electrical current from power, phone, and communications cables can be...

  • Page 8

    S2konnect n-2020sx for the n-2020sx adapter, observe the following: laser light! Laser light from fiber-optic transmission cables and components can damage your eyes. The laser components on the network adapter are class 1 laser components. Class 1 lasers are considered incapable of producing radiat...

  • Page 9: Introduction

    S2konnect n-2020sx 9 introduction thank you for purchasing a s2konnect product. This document describes the installation of the network adapter card. The n-2020sx is a pci-x adapter which must be installed in a pci-x slot of the computer. The adapter contains a network chipset “marvell 88e8022“ syst...

  • Page 10

    S2konnect n-2020sx 10 figure 1. Insertion of the adapter into the computer.

  • Page 11: Transmission Distances

    S2konnect n-2020sx 11 connection of the network adapter this chapter describes the physical connection of the s2konnect n-2020sx network adapter to the network. Transmission distances depending on the physical media (cable), different distances can be reached for transmission with the gigabit ethern...

  • Page 12

    S2konnect n-2020sx 12 figure 2. Connection of fiber-optics cables/plugs link act link act transmit port (tx) receive port (rx) 5. Turn on the computer and the switch. 6. Check the link led(s) to find out if the cable is connected correctly. If the appropriate led is on, the connection is established...

  • Page 13: 5 Hardware Features

    S2konnect n-2020sx 13 5 hardware features the s2konnect n-2020sx 1000base-sx adapter, pci/pci-x constitutes a follow-up model of the sk-9s82 adapter family. S2konnect n-20x0x and n-30x0x and the syskonnect sk-9exx/sk-9sxx gigabit ethernet adapter familiy defines a series of network interfaces that c...

  • Page 14: Led Displays

    S2konnect n-2020sx led displays once the driver has been installed, the adapter is operational. The current status and speed are indicated by the leds. 14 b a a c t 10 00 act (port b) 1000 (port b) 1000 (port a) act (port a) a c t 10 00 figure 4. Location of the leds the leds of the fiber adapters h...

  • Page 15: Dos Diagnostics Program

    S2konnect n-2020sx 15 6 testing the network adapter there are two programs available to test the network adapter: a diagnostics program running on dos and “yukon diagnostics“ running on windows. During testing, observe the safety precautions given in chapter “safety precautions“. If the fiber adapte...

  • Page 16

    S2konnect n-2020sx 16 to test the adapter, proceed as follows: 1. Switch off the computer 2. If the computer is still connected to the data network, unplug the data cable from the network adapter’s port. 3. Connect the network adapter as follows: • for the simple test: insert the protective plugs in...

  • Page 17: Troubleshooting

    S2konnect n-2020sx 17 troubleshooting if the problem persists, you can analyze the status of the network adapter with the aid of the leds and the diagnostics programs. 7 problem another expansion card fails to work after the network adapter has been installed the computer does not detect the network...

  • Page 18: Important Information

    S2konnect n-2020sx 18 important information technical support if you encounter any problems, read the relevant section of the manual. If you cannot solve your problems, consult our technical support. If you contact our technical support engineers, have the following information ready: • adapter type...

  • Page 19

    S2konnect n-2020sx 19 standard compliances ieee 802.3x with flow control / auto-negotiation ieee 802.1p quality of service ieee 802.3ad gigabit link aggregation ieee 802.3az 1000base-x gigabit ethernet boot options standard pxe 2.1 (pre-boot execution environment) rpl (remote program load) safety st...

  • Page 20

    S2konnect n-2020sx 20 driver x86 : windows server 2008 r2, windows server 2008 sp2, windows 7, windows vista, windows xp, windows 2000, windows 2003 (.Net), windows server 2003, nt4, windows98 se, me x64 : windows server 2008 r2, windows server 2008 sp2, windows 7, windows vista, windows xp, windows...

  • Page 21

    S2konnect n-2020sx 21 n-2020sx - 1000base-sx dual port server adapter, pci-x, 2 fiber lc rohs compliant with en 2002/95/eu power consumption single port : @ +3.3v / vcc: max. 0.9 a / 3 w @ +3.3v(aux): max. 375 ma dual port : @ +3.3v / vcc: max. 1.8 a / 6 w @ +3.3v(aux): max. 375 ma dimension 118.4 m...

  • Page 22

    S2konnect n-2020sx 22 appendix a. License and warranty information the americas, asia, australia, new zealand, pacific dear customer, if you acquired your s2konnect product in the united states, canada or any other country in the americas, asia, australia, new zealand, pacific, the following license...

  • Page 23

    S2konnect n-2020sx 23 europe dear customer, if you acquired your s2konnect product in europe, the following license and purchase agreement applies to you: this is a legal agreement between you, the end user and s2konnect gmbh, in ettlingen/federal republic of germany. S2konnect license and purchase ...

  • Page 24

    S2konnect n-2020sx 24 deutschland, schweiz, Österreich, liechtenstein verehrte kundin, verehrter kunde, wenn sie ihr s2konnect produkt in deutschland, in der schweiz, in Österreich oder in liechtenstein erworben haben, gilt für sie der folgende lizenz- und kaufvertrag. Dies ist ein rechtsgültiger ve...