Summary of N-3010
Page 2: S2Konnect N-3010Avb
S2konnect n-3010avb s2konnect n-3010avb 10/100/1000base-t adapter pci express user manual 2.
Page 3
S2konnect n-3010avb 3 copyright © s2konnect gmbh, 2010. All rights reserved. This manual refers to the s2konnect n-3010avb 10/100/1000base-t adapter with avb , pci express x1, 1 x rj-45. Contents are subject to change without notice. Product and brand names are (registered) trademarks of their appro...
Page 4: Conventions
S2konnect n-3010avb 4 conventions the following conventions apply to this manual. Warnings and notes used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury. Example: dangerous voltage. Used to indicate a potentially hazardous situation which...
Page 5: Table of Contents
S2konnect n-3010avb 5 table of contents conventions 4 warning notes 4 safety precautions 7 avoiding injuries - avoiding damage 7 1 introduction 8 2 system requirements 8 3 installation of the network adapter 8 4 connection of the network adapter 10 transmission distances 10 connection to the network...
Page 6: Table of Figures
S2konnect n-3010avb table of figures figure 1: insertion of the adapter into the computer figure 2: connection of the rj-45 cable/plug figure 3: location of the leds figure 4: typical display after a successful test (external repeater) 6.
Page 7: Safety Precautions
S2konnect n-3010avb 7 safety precautions to protect yourself from injuries and avoid damage of the device, always observe the following safety instructions when installing the network adapter. Avoiding injuries electrical current! Electrical current from power, phone, and communications cables can b...
Page 8: Introduction
S2konnect n-3010avb 8 introduction thank you for purchasing a s2konnect product. This document describes the installation of the network adapter card. The n-3010avb is a pci express adapter which must be installed in a pci express slot of the com- puter. The adapter contains a network chipset “marve...
Page 9
S2konnect n-3010avb 9 figure 1. Insertion of the adapter into the computer.
Page 10: Transmission Distances
S2konnect n-3010avb 10 connection of the network adapter this chapter describes the physical connection of the s2konnect n-3010avb network adapter to a network. Transmission distances the maximum transmission distance for the s2konnect n-3010avb 10/100/1000base-t adapter, is 100m, you have to use a ...
Page 11: Hardware Features
S2konnect n-3010avb 11 5 5. Turn on the computer and the switch. 6. Check the green link led to find out if the cable is connected correctly. If the led is on or blinking, the connection is established and active. Otherwise you have to check the network adapter more closely. As soon as the connectio...
Page 12: Led Displays
S2konnect n-3010avb led displays once the driver has been installed, the adapter is operational. The current status and speed are indicated by the leds. 12 act/link 10=off 100=grn 1000=ylw figure 3. Location of the leds the leds of the s2konnect n-3010avb 10/100/1000base-t adapter, pci express have ...
Page 13: 6 Software Features
S2konnect n-3010avb 13 6 software features operating system support the drivers for the s2konnect n-3010avb 10/100/1000base-t adapters, pci express sup port the following operating systems: • windows nt 4.0, windows 98 second edition, windows millennium edition, windows 7 windows 2000, windows xp, w...
Page 14: Alert Standard Format (Asf)
S2konnect n-3010avb 14 promiscuous mode / multicast support the s2konnect n-3010avb 10/100/1000base-t adapters, supports promiscu ous mode for ana- lyzers. Promiscuous mode means that ail traffic received by the adapter is passed to the cpu and not only packets addressed to it. By default, the promi...
Page 15: Reliability
S2konnect n-3010avb 15 advanced power management / wake on lan the s2konnect n-3010avb 10/100/1000base-t adapters, support power man agement as defined in the pci bus power management interface specification v1.1 and net work device class power management reference specification v2.0. The power mana...
Page 16
S2konnect n-3010avb 16 demanding applications running in high-performance environments like servers in enterpris es, web servers, and intra net servers gain particularly from the high-bandwidth and duplex capabilities of link aggregation. All s2konnect gigabit ethernet adapters support link aggregat...
Page 17
S2konnect n-3010avb 17 parity the integrity of data that pass from the network through the system and back to the network is monitored by generating and checking parity information on all available data paths. All data errors are detected immediately and can be reported. User diagnostics (dos and wi...
Page 18: Virtual Lan (Vlan) Support
S2konnect n-3010avb 18 when a component in the tree is selected, the corresponding parameters are displayed. For more information on the „marvell network control“, refer to the online help available for this program (click the help button when the program is running). Virtual lan (vlan) support a vi...
Page 19: Troubleshooting
S2konnect n-3010avb 19 troubleshooting if the problem persists, you can analyze the status of the network adapter with the aid of the leds and the diagnostics programs. 7 problem another expansion card fails to work after the network adapter has been installed the computer does not detect the networ...
Page 20: Important Information
S2konnect n-3010avb 20 important information technical support if you encounter any problems, read the relevant section of the manual. If you cannot solve your problems, consult our technical support. If you contact our technical support engineers, have the following information ready: • adapter typ...
Page 21
S2konnect n-3010avb 21 www.S2konnect.Com avb support according to ieee 802.1qav supports both avb and non avb queues suports priority between non avb high and low traffi c suports priority between avb high and low traffi c supports up to six fl ow rates and two class rates for avb traffi c precise t...
Page 22
S2konnect n-3010avb 22 standard compliance ieee 802.3u (ethernet and fast ethernet) ieee 802.3ab and ieee 802.3z (gigabit ethernet) ieee 802.3ad (link aggregation) ieee 802.3x (flow control and auto-negotiation) ieee 802.1p (quality of service) ieee 802.1q and ieee 802.3ac (vlan and vlan tagging) ie...
Page 23
S2konnect n-3010avb 23 n-3010avb - 10/100/1000base-t adapter with avb, pci express x1, 1 x rj-45 emc ce fcc environment specifi cations storage: -20°c to +70°c, 30% to 80% rel. Humidity (non-condensing) operating: -0°c to +50°c, 10% to 95% rel. Humidity (non-condensing) rohs compliant with en 2002/9...
Page 24
S2konnect n-3010avb 24 appendix a. License and warranty information the americas, asia, australia, new zealand, pacific dear customer, if you acquired your s2konnect product in the united states, canada or any other country in the americas, asia, australia, new zealand, pacific, the following licens...
Page 25
S2konnect n-3010avb 25 europe dear customer, if you acquired your s2konnect product in europe, the following license and purchase agreement applies to you: this is a legal agreement between you, the end user and s2konnect gmbh, in ettlingen/federal republic of germany. S2konnect license and purchase...
Page 26
S2konnect n-3010avb 26 deutschland, schweiz, Österreich, liechtenstein verehrte kundin, verehrter kunde, wenn sie ihr s2konnect produkt in deutschland, in der schweiz, in Österreich oder in liechtenstein erworben haben, gilt für sie der folgende lizenz- und kaufvertrag. Dies ist ein rechtsgültiger v...