Summary of S-8180T
Page 2: S2Konnect S-8180T
S2konnect s-8180t s2konnect s-8180t unmanaged gigabit ethernet switch user manual 2.
Page 3
S2konnect s-8180t 3 copyright © s2konnect gmbh, 2009. All rights reserved. This manual refers to the s2konnect s-8180t unmanaged switches. Contents are subject to change without notice. Product and brand names are (registered) trademarks of their appropriate owners. If you have comments on this docu...
Page 4: Conventions
S2konnect s-8180t 4 conventions the following conventions apply to this manual. Warning and notes used to indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury. Example: dangerous voltage. Used to indicate a potentially hazardous situation which, i...
Page 5: Table of Contents
S2konnect s-8180t 5 table of contents conventions 4 warning notes 4 safety precautions 7 avoiding injuries 7 avoiding damage 7 1 installation of the s2konnect unmanaged switch 8 installation on a level surface 8 installation on a wall 8 installation in a rack 9 2 connection of the s2konnect unmanage...
Page 6: Table of Figures
S2konnect s-8180t table of figures figure 1 : wall installation figure 2 : rack installation figure 3 : connection of the rj-45 cable/plug figure 4 : connection of switches figure 5 : front panel of the s-8180t figure 6 : rear panel of the s2konnect unmanaged switches figure 7 : location of the leds...
Page 7: Safety Precautions
S2konnect s-8180t 7 safety precautions to protect yourself from injuries and avoid damage to the s2konnect s-8180t unmanaged switches, always observe the following safety instructions. Avoiding injuries electrical current! Electrical current from power, phone, and communications cables can be hazard...
Page 8: Unmanaged Switch
S2konnect s-8180t 8 installation of the s2konnect unmanaged switch the installation of the s2konnect s-8180t unmanaged switches is easy. The unit may be used for rack, wall or on table installation. Installation on a level surface to install the s2konnect unmanaged switch on a table or similar, atta...
Page 9: Installation In A Rack
S2konnect s-8180t 9 make sure that the wall is capable of supporting the s2konnect unmanaged switch. The s2konnect unmanaged switch must not be exposed to direct sunlight or be installed near heating vents. The location should be ventilated to prevent overheating. Installation in a rack to install t...
Page 10: Connection of The S2Konnect
S2konnect s-8180t 10 connection of the s2konnect unmanaged switch this chapter describes the physical connection of the s2konnect s-8180t unmanaged switches to other switches as well as to a network system. Transmission distances all ports of the switch are supporting 10/100/1000baset connections on...
Page 11: Connection to Other Switches
S2konnect s-8180t 11 connection to other switches the s2konnect unmanaged switch can be connected directly to the port of another switch (or hub) as each port of the s2konnect unmanaged switch supports auto mdi and mdix functiona- lities. In order to connect two switches with one another, proceed as...
Page 12: 3 Features
S2konnect s-8180t 12 3 features the s2konnect s-8180t unmanaged switches are designed for easy installation and high per- formance in environments with varying traffic loads and multiple users. Front panel the front panel of the s2konnect unmanaged switches consists of the power led, link and status...
Page 13: Rear Panel
S2konnect s-8180t 13 the leds of the s2konnect s-8180t unmanaged switches have the following meaning: rear panel the rear panel accommodates the plug socket for connection of a standard three-pin power plug. The s2konnect unmanaged switches automatically adjust their power setting to any supply volt...
Page 14
S2konnect s-8180t 14 s-8180t - 8 port gigabit ethernet switch 8 ports 10/100/1000base-t, auto mdi/mdi-x auto-negotiation 128 kb packet buffer memory 2 priority queues per port honors 802.1p values and honor ip dscp values weighted round robin (wrr) scheduling across queues 1u, desktop, wall- or rack...
Page 15
S2konnect s-8180t 15 s-8180t - 8 port gigabit ethernet switch rohs, other rohs compliant dimension 44x266x162 mm, 1.7x10.5x6.4” (high, width, deep) weight unit 1,45 kg, packet 2,35 kg warranty 2 years order numbers 100-001-001-008 © copyright 2009 s2konnect all rights reserved. All brand and product...
Page 16
S2konnect s-8180t 16 appendix a. License and warranty information the americas, asia, australia, new zealand, pacific dear customer, if you acquired your s2konnect product in the united states, canada or any other country in the americas, asia, australia, new zealand, pacific, the following license ...
Page 17
S2konnect s-8180t 17 europe dear customer, if you acquired your s2konnect product in europe, the following license and purchase agreement applies to you: this is a legal agreement between you, the end user and s2konnect gmbh, in ettlingen/federal republic of germany. S2konnect license and purchase a...
Page 18
S2konnect s-8180t 18 deutschland, schweiz, Österreich, liechtenstein verehrte kundin, verehrter kunde, wenn sie ihr s2konnect produkt in deutschland, in der schweiz, in Österreich oder in liechtenstein erworben haben, gilt für sie der folgende lizenz- und kaufvertrag. Dies ist ein rechtsgültiger ver...