1. DL manuals
  2. S2P
  3. Air Conditioner
  4. KS2P-18C210
  5. Owner's Manual

S2P KS2P-18C210 Owner's Manual

Manual is about: OUTDOOR EVAPORATIVE AIR COOLER

Summary of KS2P-18C210

  • Page 1

    Evaporative air cooler 1 owner’s manual read and save these instructions read all instructions carefully before setting up and operating this unit. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow th...

  • Page 2

    Evaporative air cooler 2 preface we really appreciate you credit and support in advance. Our evaporative air cooler will bring you breeze health with least energy. Adopting the most advanced evaporative cooling technology in the world and the contemporary production management system, this installat...

  • Page 3

    Evaporative air cooler 3 location of evaporative air cooler always make sure the unit is operated on a level surface. When using the cooler indoors, the best location for it is near a partially opened window or door where hot outdoor air can be drawn into the unit. The mobile model is portable but u...

  • Page 4

    Evaporative air cooler 4 product dissection and spare parts main components: motor: high efficiency, low noise, strong power volume full prot ection against over current, over voltage and overload unsurpassed reliability cont rol box: micro-computer control, easy upgrade, can design for customer spe...

  • Page 5

    Evaporative air cooler 5 fan blade: made up of 6 pieces of high-rigid and fibrous plastic all pieces can be adjusted the prefer angle strong wind volume drain valve: automatic water draining every 8hours prevents algae growth maintains clean unit clean and dry function inlet valve: new type, smart d...

  • Page 6

    Evaporative air cooler 6 check up and adjustment before operation: 1. Is the cooler installed horizontally? 2. Is drain pipe connected to the machine? 3. Is the wat er supply leaking? 4. Adjust water level in the sump? 5. Is the power supply connected correctly (particularly for three phase machine)...

  • Page 7

    Evaporative air cooler 7 packing and transportation 1. Packed in carton on wood pallet. 2. Keep dry and upright. 3. Do not pile more than 2 units. 4. Keep the unit vertical during transportation. The tilt angle shall be less than 60 degrees. Operating instructions installing the casters: locate the ...

  • Page 8

    Evaporative air cooler 8 operating approach of rtc wall controller for ks2p-18c210 1. Turn on/ turn off 1) press the button of , you can turn on and turn off evaporative air cooler manually . 2) hold button down for 5 seconds, the wall controller will get back to the ex-factory setting, restart. 2.S...

  • Page 9

    Evaporative air cooler 9 3. Fan note: the exhaust function does not apply to all machines, it will be taken effect only for inverter evaporative air coolers. If your controller does not support the exhaust function, the button is not available. (ks2p-18c210 without exhaust function) the button is us...

  • Page 10

    Evaporative air cooler 10 note: the pump protection also happens on water shortage when cool function been turned on. Picture 4-1 turn on vent and cool picture 4-2 pump stop running (low water) 5. Clean drain function makes motor run by contraries to clean cooling pad, turn on the drain valve, drain...

  • Page 11

    Evaporative air cooler 11 will be 00 → 04 → 08 → 16 → 32 → 48 → 00 (in hours). If the auto-cleaning cycle is 00h, the auto-cleaning function been cancelled. When set auto-cleaning cycle, the screen will show the cycle of auto-cleaning(as shown in picture 6-1), auto-cleaning cycle is 08-hour. The tim...

  • Page 12

    Evaporative air cooler 12 take an example of manual mode (manual). 8.1 tim ing turn on the processes are as follows: 1) press the button, the screen will show “--:--“, “on” is flashing, means timing turn on function doesn ’t be set, like the picture of 8-1. 2) press button, --:-- changes to 00:00, a...

  • Page 13

    Evaporative air cooler 13 8.2 tim ing turn off the processes are as follows: 1)press the button, and the screen will show “18:40”, “on” is flashing, means the machine will be turned on at 18:40; see the picture of 8-5. 2) press button, and the screen will show “--:--“, “off” is flashing, means timin...

  • Page 14

    Evaporative air cooler 14 picture 8-9 finish the settings of timing turn on/off 8.3 cancel tim ing the processes are as follows: 1)press the button, the screen shows “18:40”, “on” is flashing, time of turn on is 18:40, see the picture of 8-5. 2) press button, the screen sh ows “23:30”, “off” is flas...

  • Page 15

    Evaporative air cooler 15 picture 8-12 timing function been cancel 9. Mode note: this feature does not apply to all machines, it will be taken effect only for evaporative air coolers with relative humidity and temperature detecting functions. If your controller does not support the relative humidity...

  • Page 16

    Evaporative air cooler 16 preconcerted temperature. When the mode switch to auto℃, the icons of auto℃, fan and cool will be shown on screen, fan and cool functions will be turned on automatically, use buttons to change speed. As shown in picture 9-3, current temperature is 27℃, the preconcerted temp...

  • Page 17

    Evaporative air cooler 17 fan and cool functions will be turned on automatically, use button to change speed. (as shown in picture 9-6), the current relative humidity is 56%, preconcerted relative humidity is 60%, fan and cool functions been turned on. The default temperature on auto% mode is 60%, i...

  • Page 18

    Evaporative air cooler 18 off the cooling mode. (picture 10-1 and 10-2). If the cooling mode been enabled, press the button, the cooler will operate as follows: (1) if the water level is low, the tank will be filled automatically. Fan icon flashes on screen. (like the picture of 10-3). (2) 2 minutes...

  • Page 19

    Evaporative air cooler 19 if intelligent cleaning mode is enabled, press the button, the cooler will operate as follows: (1) the motor will run by contraries and exhaust air. If the current air cooler is venting, the venting function will be stopped. 25 seconds later, exhaust function be opened auto...

  • Page 20

    Evaporative air cooler 20 picture 12-1 turn on the shutdown 12-2 turn off the shutdown cleaning mode cleaning mode picture 13. Suggestions 13.1 cool icon flashing cool icon flashing (as shown in picture 4-2), indicates the water tank with low water level. In order to product the pump, the pump will ...

  • Page 21

    Evaporative air cooler 21 e3 ”e3” flashing indicates, the voltage supply to air cooler is under-voltage, (lower than 140v or phase failure). Please break the power off, and check the power supply. E8 "e8" flashing indicates, the wall controllers can’t receive the signal from air cooler, tr y to pull...

  • Page 22

    Evaporative air cooler 22 general problems number problem problem cause suggested remedy note 1 air cooler fails to run and no response to all buttons, and the indicator fails to flash power cut or incorrect input power supply connect with electricity check input pressure and reconnect as requiremen...

  • Page 23

    Evaporative air cooler 23 operate loose electrical connections tighten connections 7 pump run but does not circulate water or pads lack water pump strainer clogged or dirty clean stainer blocked water supply tubing clean the tubing blocked water distributor a top of pad frames clean the water distri...

  • Page 24

    Evaporative air cooler 24 warranty ks2p-18c210 evaporative air cooler extends 1-year limited warranty to the original purchase of a mobile evaporative air cooler operated under normal conditions . Ⅰ. One years coverage applies to all components and accessories furnished by s2p. At our option, we wil...