SA Sport 5141 Assembly & Care Instructions

Manual is about: LEATHER POMMEL HORSE

Summary of 5141

  • Page 1

    Assembly and care instructions leather pommel horse 5141 version: 8920108 (revised 06/15) sales and service sasportonline.Com sa sport – canada and international 135 forestview road, po box 40 orillia, ontario, canada l3v 6h9 toll-free: (800) 563-6479 telephone: (705) 325-2274 fax: (705) 325-1485 in...

  • Page 2

    5141 pommel horse assembly instructions page 2 of 9 thank you for purchasing a 5141 - pommel horse from sa sport. We appreciate your business and value you as a customer! Your horse is constructed with the finest quality raw materials. We are sure you will be pleased with its quality, durability and...

  • Page 3: 1. Assembly Instructions

    5141 pommel horse assembly instructions page 3 of 9 1. Assembly instructions 1.1. Layout of area required for the pommel horse 1.2. Assembly 1. Remove the pedestal base from its carton and set it on the floor. Ensure it is leveled. 2. Attach the uprights posts as shown below, using the three flat he...

  • Page 4

    5141 pommel horse assembly instructions page 4 of 9 3. Turn the locking handles on the pedestal uprights counter-clockwise until they are completely loosened. Make sure the ‘v’ shape in the blocks faces towards the adjusting shaft. 4. Open the horse top carton and remove loose pommels and pommel har...

  • Page 5

    5141 pommel horse assembly instructions page 5 of 9 9. Check to ensure that both adjusting tubes are locked at the same height. 10. Shake the horse top from the middle to center the body on the adjusting shafts. 11. Fully tighten the mounting plates assembled in step 6. 12. Assemble the pommel handl...

  • Page 6

    5141 pommel horse assembly instructions page 6 of 9 1.3. Mounting the pommels 1. Place long pommel screws through the pommels and then into the holes on top of the pommel horse (fig. 4). 2. Thread on cam lock handle so when handle is closed, it does tighten the pommels. 1.4. Anchoring instructions t...

  • Page 7

    5141 pommel horse assembly instructions page 7 of 9 1.5. Installing concrete anchors to determine anchor locations, please refer to the following section for your specific equipment to be anchored. Tools required (customer supplied): • tape measure • anchor setting tool or punch with a 5 / 16 ” diam...

  • Page 8: 2. Adjustment Instructions

    5141 pommel horse assembly instructions page 8 of 9 2. Adjustment instructions 2.1. Height adjustment 1. Have 2 people support the horse top from both ends. 2. Loosen both locking handles and pull the snap locks. (see fig. 3) the horse top has the potential to drop at this stage. Injury can occur as...

  • Page 9: 4. Safety

    5141 pommel horse assembly instructions page 9 of 9 4. Safety warning any activity involving motion or height creates the possibility of serious injury including permanent paralysis and even death, from landing or falling on the neck, head, or other parts of the body. You assume a risk of serious in...