Sabre 1842GV Operator's Manual - Service Transmission

Service Transmission - Page 48

SERVICE TRANSMISSION

Transmission Oil (Models 1842HV and 

1848HV Only)

NOTE: Your SABRE Yard Tractor is filled with 5W30 

at the factory

Use 5W30 or 10W30 when adding transmission fluid.

Check Automatic Transmission Fluid Level 

(Models 1842HV and 1848HV Only)

1. Park machine on level surface.

2. Allow oil in transmission to cool before checking.

3. On the rear of the tractor, there is a sight hole (A) 

through the left rear side of the fuel tank. The automatic 

transmission reservoir can be seen through the sight 

hole. 

4. Check FULL (B) and ADD (C) marks on the reservoir 

bottle which will indicate if fluid needs to be added. 

5. Add transmission fluid if necessary. (See Adding 

Automatic Transmission Fluid below.)

Adding Automatic Transmission Fluid 

(Models 1842HV and 1848HV Only

1. Tip seat forward and slide seat suspension all the way 

forward.

2. Remove cap (A) from automatic transmission 

reservoir. Cap is located under seat and left of fuel cap.

3. Fill to correct level using 5W30 or 10W30 motor oil. 

DO NOT OVERFILL.

M63559

A

M63557a

B

C

B

C

A