SACKit WOOFit User Manual

Other manuals for WOOFit: User Manual, User Manual, User Manual

Summary of WOOFit

  • Page 1

    Woof it user manual.

  • Page 2: Www.Sackit.Eu/reg

    1 uk box contents - woofit speaker - user manual - 2-in-1 charging cable - storage bag - micro usb antenna thank you! Thank you for purchasing this woofit speaker from sackit. Please read this manual carefully before use. We are not responsible for any person or property damage caused by improper us...

  • Page 3

    Quick start guide 2 uk 1. Charge the woofit speaker using the included micro usb charging cable for no less than 2 hours 2. Turn on woofit 3. Turn on bluetooth on the device you wish to connect with 4. Choose sackit in the bluetooth settings on your device 5. Start playing music from your device 6. ...

  • Page 4

    3 uk micro usb input micro sd player mini jack input/ aux out power button - micro usb input - mini jack input - aux out - micro sd player - power button - light indicator - microphone - m (mode) button - play/pause button - volume (-) button - volume (+) button mode play/pause volume + volume - lig...

  • Page 5: Power Button

    4 uk power button this button must be slided right to turn on the woofit speaker, and to the left to turn the device off. M (mode) knap push the mode button to switch between micro sd player, aux out, fm radio and bluetooth mode. If there is no micro sd card in the woofit speaker, this mode will aut...

  • Page 6: Bluetooth

    5 uk to charge the woofit speaker, the included micro usb charging cable must be inserted in the micro usb input on woofit and be connected to a computer or an adapter. The charging begins automatically whether the system is on or off. The charging status can be seen on the light indicator. During c...

  • Page 7: Phone Call

    6 uk if ”sackit” does not appear on the list of found devices, the connection process must be started over. Note that the two units should be in one meter radius of each other during the connection. 3. Choose the ”sackit” connection on your bluetooth device. 4. When the connection is established the...

  • Page 8: Aux Connection

    7 uk aux connection press one time on the mode button to choose ”aux out” as mode. The light indicator will now light up green. To adjust the sound level the volume buttons +/- has to be pressed and hold down. A short push on the +/- buttons works as play/pause buttons in this mode. Mini jack input ...

  • Page 9: Home Systems

    8 uk home systems it is possible to connect woofit to a home system. To do this, use a standard stereo mini-jack (3.5 mm.). Fm radio to use the fm radio, please follow this guide. 1. Turn on your woofit speaker. 2. Connect the included micro usb antenna with woofit via micro usb input. 3. The antenn...

  • Page 10

    No light: woofit speaker is turned off. Green light: woofit is fully charged or woofit is turned on. Blue and green flash: micro sd player is active or fm radio is seaching for stations. Red and blue flash: woofit is searching for bluetooth device. Light indicator red light: woofit is charging. Blue...

  • Page 11: Connection Problems

    Connection problems woofit bluetooth locks on the last connected device, which requires the connection to be disconnected before a new unit to be connected to woofit. This can be done on the connected device (in bluetooth settings) or by resetting the speaker. Woofit speaker is reset by holding the ...

  • Page 12

    11 uk safety precautions please read and follow these instructions to ensure correct and safe use of woofit loudspeaker. Charge woofit minimum of 2 hours using the supplied usb cable before you use the speaker for the first time. Do not expose woofit to rain, water or store it in humid environments....

  • Page 13

    Uk 12 operation voltage: 3.7 v charging voltage: 5v output power: 3 w speaker spec.: 40 mm 2.6 Ω 3 w frequency response: 60hz – 18 khz lithium battery capacity: 430 ma/h thd: ≤ 0.5% snr: ≥ 95 db dimensions: d: 60 mm. H: 54 mm. Technical specifications.

  • Page 14

    Uk 13 notice the bluetooth function has first priority, so when you play music from another bluetooth device the audio from another mode (fm radio, aux out or micro sd player) stops. When playing from a bluetooth device stops, woofit automatically returns to the previous mode after 3 seconds. The ba...

  • Page 16

    Www.Sackit.Eu.