Saeco 0361.00B.77C Operating Instructions Manual - page 17
17
ENGLISH
PROGRAMMING MACHINE FUNCTIONS
RINSING CYCLE
TIMER
DESCALING
The machine will carry out
a rinsing cycle.
When the cycle is
completed this message
will be displayed:
This function is used to rinse all the coffee-dispensing parts
with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Use the buttons to adjust
the timer setting.
This is a factory-set function that automatically switches the
machine into “Standby” when 3 hours have elapsed since a
coffee was dispensed.
The switch-off time can be adjusted, in 15-minute intervals, to
a minimum of 15 minutes; the function cannot be deactivated.
Prepare the machine for
descaling.
This function enables you to activate an automatic
descaling cycle. See page 10.
Warning: a large quantity of water may be discharged from the
coffee brew unit. Before starting, empty out the drip tray and
keep an additional container handy.
When
the
function
appears, select it using the
“menu” button.
When
the
function
appears, select it using the
“menu” button.
When
the
function
appears, select it using the
“menu” button.
Press the “menu” button to
confirm your choice.
Press the “menu” button to
confirm your choice.
DESCALING
*
SIGNAL DESCALING
DESCALING
FILL WATERTANK
TIMER
*
RINSING CYCLE
STANDBY
AFTER
2:45
STANDBY
AFTER
1:15
RINSING CYCLE
*
FACTORY SETTINGS
RINSING CYCLE
*
FACTORY SETTINGS
FILL WATERTANK
DESCALING
FILL WATERTANK
0361_95x Magic Comfort Plus_A5_Rev00.indd
08/09/2003, 23.42
17