- DL manuals
- Saeco
- Coffee Maker
- 10000225
- Operation And Maintenance Manual
Saeco 10000225 Operation And Maintenance Manual
Summary of 10000225
Page 1
Operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules. For household use only.
Page 2
Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug...
Page 3
Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...
Page 4: Contents
2 contents general information ................................................................................................................... 3 technical data ............................................................................................................................... 3 applia...
Page 5: General Information
3 this coffee machine is made for brewing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by:...
Page 6: Accessories
4 pre-ground bypass doser accessories intenza water fi lter water hardness test strip appliance power cord brew group dregdrawer socket for power cord coffee bean hopper power button service door coffee bean hopper lid drip tray control panel sbs dial dispensing head drip tray + grill hot water / st...
Page 7: Installation
5 1 2 3 4 7 6 5 installation insert the plug into the socket located on the back of the machine and insert the other end into a power outlet with suitable current. Place a container beneath the hot water/steam wand. Remove the coffee bean hopper lid. Fill the hopper with coffee beans. Close the lid ...
Page 8: Installation
6 4 1 2 3 6 5 1 2 1 2 3 4 a b c installation setting the language when the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used. This...
Page 9: Intenza Water Filter
7 5 6 7 8 9 1 3 2 4 insert the fi lter in the empty tank. The reference mark and the groove must match. Push fi rmly until it is completely inserted. Select “water fi lter” and press again. When the machine has fi nished, turn the knob until it is in the rest position ( ). Press a few times until th...
Page 10: Control Panel
8 • press the button twice to make 2 cups. This operation can be performed up until the grinding of the fi rst cup is complete. Press twice control panel access the programming menu click wheel selects the aroma (amount of coffee ground per cup) or selects pre-ground coffee steam button brew button ...
Page 11: Coffee Strength
9 medium coffee strong coffee mild coffee sbs adjusts the fullness of the brewed coffee. The coffee may even be adjusted while brewing. This adjustment has an immediate effect on the selected type of brewing. Coffee strength sbs – saeco brewing system adjustments the sbs dial has been carefully desi...
Page 12: Saeco Adapting System
10 saeco adapting system coffee is a natural product and its characteristics may change according to its origin, blend and roast. The saeco coffee machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (not including fl avored or car...
Page 13: Coffee Grinder Adjustment
11 the machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed down and turned using the supplied grinder adjustment key only. Press ...
Page 14: Brewing With Whole Beans
12 3 4 5 1 2 coffee brewing can be stopped at any time by pressing the button again. The steam wand may reach high temperatures: danger of scalding. Do not touch it with bare hands. Check that all the containers are clean. To carry out this operation, follow the instructions in the “cleaning and mai...
Page 15
13 4 1 2 5 3 brewing with pre-ground coffee the machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be scooped into the bypass doser next to the coffee bean hopper. Only use coffee that is ground specifi cally for espresso machines and never coffee beans or instant ...
Page 16: Hot Water Dispensing
14 1 2 3 5 6 7 4 hot water dispensing dispensing may be preceded by short spurts of hot water and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Beverage dispensing press the button. Place a container bene...
Page 17: Dispensing Steam
15 1 2 3 5 6 7 4 dispensing steam press the button. Place a container with the beverage to be frothed beneath the hot water/steam wand. Turn the knob to the position. Heat the beverage by gently swirling the container while steam is dispensed. When you have fi nished, turn the knob until it is in th...
Page 18: Beverage Dispensing
16 3 2 4 5 6 1 8 7 beverage dispensing making cappuccino dispensing may be preceded by short spurts of hot water and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Press the button. Immerse the hot water/s...
Page 19: Milk Island (Optional)
17 1 2 3 5 4 6 7 8 milk island - 08 t ype mki002 milk island - 04 t ype mki001 milk island (optional) this device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the milk island, read the manual and all precautions carefu...
Page 20: Beverage Settings
18 beverage settings the following page describes how to program coffee beverages; the programmable settings for each beverage may differ depending on the type of beverage. Programming from the “beverage settings” menu to adjust the settings for preparing beverages: press the button and select “beve...
Page 21
19 1 2 3 4 5 6 7 8 9 10 check that the water tank and coffee bean hopper are full; place the cup under the dispensing head. Press the button. Press the button a few times to adjust the quantity of coffee to be ground or select the use of pre- ground coffee. Press the button to save. Select the bever...
Page 22: Programming The Machine
20 programming the machine some of the machine’s functions can be programmed according to your individual preferences. Beverage settings (see page 18) machine settings (see page 21) maintenance settings (see page 22) to exit the programming mode: energy saving (stand-by) (see page 23) special functi...
Page 23: Machine Settings
21 machine settings 2.1 language english 2.6 cup-warming surface off 2.3 acoustic alarm on 2.4 water filter alert on 2.5 rinsing on 2.2 water hardness 3 2.7 clock setting to change the machine operation settings, press the button, select “machine settings” and press the button. Navigate the click wh...
Page 24: Programming The Machine
22 programming the machine access the descaling menu. To access the machine maintenance settings, press the button, scroll to “maintenance” and press the button. Navigate the click wheel with your fi nger. Access the water fi lter menu. Clean the machine’s internal circuits used for brewing coffee. ...
Page 25: Special Functions
23 this menu provides access to the machine’s special functions. Press the button to access, select “special functions” and press the button. This menu includes a function which allows you to restore all factory settings. This function is particularly important for restoring the basic parameters. No...
Page 26: Maintenance
24 1 2 3 6 4 5 this menu performs the automatic descaling cycle. Descaling is necessary every 1-2 months, when water dispenses more slowly than normal, or when the machine indicates the need to descale. The machine must be turned on and will automatically manage the dispensing of the descaling agent...
Page 27
25 7 8 9 10 12 13 14 15 11 when the above message appears, the boiler is at the right temperature. Pour the descaling solution into the tank. Insert the tank into the machine. Press the button to start. Insert descaler ok to start cycle insert descaler ok to start cycle when the solution is fi nishe...
Page 28: Maintenance
26 16 2 3 5 6 1 4 maintenance turn the knob until it is in the rest position ( ). Check the quantity of water contained in the tank and, if desired, install the water fi lter again or re-insert the small white fi lter (see page 7). When descaling is complete, return to the main menu to brew beverage...
Page 29: Cleaning And Maintenance
27 1 2 3 1 2 5 4 6 cleaning and maintenance switch off the machine and unplug it. Clean the tank and the cover. Remove the drip tray, empty and wash it with soap and water. Do not wash it in the dishwasher. Remove the dregdrawer. Remove and wash the wand support; then re-insert it. Remove the outer ...
Page 30: Cleaning The Brew Group
28 1 2 5 8 9 6 7 4 3 the brew group must be cleaned at least once a week. Before removing the group, remove the dregdrawer as shown on page 27. Wash the brew group with lukewarm water. Lubricate the brew group after approximately 500 brewing cycles. The brew group lubricant can be purchased through ...
Page 31: Error Codes
29 error codes guide message that appears how to remove the message out of service (xx) restart to fix… (xx) identifi es an error code.Turn off and after 30 seconds turn the machine on again to restore normal operation.If the problem persists, call saeco or an authorized service center and give the ...
Page 32
30 troubleshooting - safety rules p roblems c auses s olutions the machine does not turn on. The machine is not connected to the power source. Connect the machine to the power source. The plug has not been plugged into the back of the machine. Insert the plug into the machine’s power socket. Hot wat...
Page 33: Safety Rules
31 safety rules in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for frothing milk. • for domestic use. • this appliance is not intended for use by persons (including children) with reduced physical, sensory or ...
Page 34: Safety Rules
32 concentration of dust or oily substances suspended in the air. • do not install the machine on top of other appliances. Dangers • the appliance must not be used by children and persons who have not been informed of its operation. • the appliance is dangerous to children. When left unattended, unp...
Page 35: Sup 032Br
33 r & d manager mr. Andrea castellani ec declaration of conformity ec 2006/95, ec 2004/118, ec 1992/31, ec 1993/68 saeco international group s.P.A - via torretta, 240 - 40041 gaggio montano (bo) - italy declare under our responsability that the product: automatic coffee maker sup 032br to which thi...
Page 36
Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com © saeco international group s.P.A. The manufacturer reserves the right to change the features of the product without prior notice. T y p e s u p - 03 2 b r c o ...