- DL manuals
- Saeco
- Coffee Maker
- 10002683
- Operating And Maintenance Manual
Saeco 10002683 Operating And Maintenance Manual - Beverage Dispensing
12
1
3
2
1
A:75% B:25%
A:50% B:50%
A:25% B:75%
A:100%
B:100%
2
my
espresso
start!
go
back
DISPENSING COFFEE, HOT WATER AND MILK CAN BE INTERRUPTED AT ANY TIME BY
SELECTING THE "STOP ... DISPENSING" BUTTON.
Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and
Maintenance" (see page 41).
To brew 2 cups, the machine dispenses half of the entered quantity and briefl y interrupts dispensing in
order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.If a milk
beverage has been chosen, the machine automatically dispenses the milk. If the fi rst coffee is interrupted,
the second will not be dispensed.
ESPRESSO / COFFEE / LONG COFFEE
Choose the beverage and press
the corresponding icon on the
display: once for 1 cup and twice
for 2 cups.
stop
coffee
dispensing
espresso
BEVERAGE DISPENSING
This procedure shows how to dispense an espresso. To dispense another type of coffee, press the
appropriate icon. Use appropriate espresso or coffee cups so that the coffee will not overfl ow.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is
possible to customize this quantity. See page 17. If you wish to interrupt the dispensing cycle, press the " stop
coffee dispensing" button.
show icon
explanation
my custom
coffee
program-
ming
menu
Press the hot water icon once.
HOT WATER DISPENSING
WHEN THE HOT WATER BEGINS TO DISPENSE, SHORT SPURTS OF HOT WATER MAY BE
DISPENSED WHICH POSE A RISK OF SCALDING. THE HOT WATER SPOUT CAN REACH
HIGH TEMPER ATURES: AVOID TOUCHING IT WITH BARE HANDS.
Begin hot water dispensing.
To dispense another cup of
hot water, repeat this
operation.
stop
water
dispensing
hot
water
show icon
explanation
my custom
coffee
program-
ming
menu
The machine starts grinding the
coffee; then, it starts brewing the
selected beverage.
Wait for the machine to start the
grinding process or modify your
selection.
Summary of 10002683
Page 1
Table of contents operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules for household use only.
Page 2
Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to person do not immerse cord, plugs...
Page 3
Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...
Page 4: Table of Contents
2 general information .................................................................................................................................3 machine ..............................................................................................................................................
Page 5
3 the coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverage and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or profession...
Page 6: Machine
4 compartment for pre- ground coffee brew group coffee grounds drawer socket for power cord open button of double coffee bean hopper double coffee bean hopper cup warming plate main switch service door accessories coffee bean hopper cover drip tray button for raising/lowering the drip tray touch scr...
Page 7: Installation
5 1 3 4 5 8 7 6 2 press the button to open the cover. Fill hopper “a” with coffee beans (see page 10). The machine automatically primes the water circuit. The machine is now ready for use. Water may not be dispensed into the glass. This should not be considered a malfunction. To adjust the water har...
Page 8: Installation
6 press to select the desired language. The machine starts and displays the menu in the selected language. See manual on page 36 to adjust the clock. 5 select the desired language. Press “ok”. Demo self-test 4 if desired, the “demo” function (see page 28) may be activated by pressing the key, each t...
Page 9
7 6 9 5 press "machine settings". Press "water fi lter". Press "water fi lter activation". Water fi lter inserted not inserted water fi lter activation place a container beneath the hot water spout. Press "programming menu". Show icon explanation my custom coffee program- ming menu main- tenance main ...
Page 10: Display
8 • to get the desired beverage, press the corresponding symbol on the display. The machine automatically performs all the necessary operations (see page 11). Weak medium strong the intensity of the color on the cup icon (only valid for coffee beverages) indicates the aroma, or quantity of coffee to...
Page 11: Adjustments
9 2 1 3 open the milk compartment by pressing the button and remove the milk container. Remove the cover and pour in the milk. Do not exceed the maximum level shown in the fi gure. Close the container and put it back in its appropriate seat. Make sure to carefully close the compartment. Medium coffee...
Page 12: Coffee Mixing
10 the two coffee bean hoppers cannot be filled with ground, instant or caramelised coffee. Coffee mixing double coffee bean hopper the primea cappuccino duo has two coffee bean hoppers which will enable you to use one single type of coffee or mix two different types together. Thanks to the two cera...
Page 13
11 show icon explanation my custom coffee program- ming menu 1 a:75% b:25% a:50% b:50% a:25% b:75% a:100% b:100% 2 go back selection of a single blend or blend mix all coffee products may be dispensed by using one single coffee blend, or by mixing the two blends together, according to your taste. Af...
Page 14: Beverage Dispensing
12 1 3 2 1 a:75% b:25% a:50% b:50% a:25% b:75% a:100% b:100% 2 my espresso start! Go back dispensing coffee, hot water and milk can be interrupted at any time by selecting the "stop ... Dispensing" button. Check that all the containers are clean. To do this operation, follow the instructions in the ...
Page 15
13 1 2 3 4 5 dispensing beverages with ground coffee pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "beverage programming" chapter on page...
Page 16: Beverage Dispensing
14 3 7 8 1 9 4 refi ll the milk container or stop milk dispensing if there is no milk left, the following message will appear; choose the option 5 or 6. Stop milk dispensing 5 6 refi ll the milk container or stop milk dispensing .... Press the button; in both cases, the brewing process will automati...
Page 17
15 12 start rinsing milk rinsing cycle to perform a rinse cycle, press “start rinse cycle”. 11 rinsing... Rinsing milk circuit- please wait wait for the cycle to be completed. After this, the machine returns to the main menu. Remove the container and put it in the refrigerator if it contains remaini...
Page 18: Beverage Dispensing
16 3 1 4 5 3 4 5 1 a:75% b:25% a:50% b:50% a:25% b:75% a:100% b:100% 2 my cappuccino start! Go back wait for the machine to start the grinding process or modify your selection. Beverage dispensing espresso macchiato espresso macchiato cappuccino cappuccino cappuccino espresso macchiato press the ico...
Page 19: Beverage Programming
17 1 2 1 beverage programming beverage programming menu hold down the beverage button for two seconds press the button "my coffee" and within two seconds, press the beverage button each beverage can be programmed according to your individual taste. Customization is shown on the display with the addi...
Page 20: Beverage Programming
18 a:75% b:25% 1 5 6 7 a:75% b:25% select the blend to be used (see page 17) beverage programming to brew an amount of coffee greater than that preset by the manufacturer, press “custom coffee amount” before the end of the brew cycle in progress. When the quantity is reached, press “stop coffee disp...
Page 21
19 a:75% b:25% 8 9 pressing start! Allows the machine to start the brewing cycle. The machine automatically starts and fi nishes dispensing the milk, according to the standard settings. My latte macchiato to dispense an amount of milk greater than that preset by the manufacturer, press “custom milk a...
Page 22: Programming The Machine
20 programming the machine machine settings when the machine settings are selected the following screen appears. Here you can: set the language of the menus. Set the illuminate cups function. Set/activate the tones. Set the water hardness. Set the circuit rinse cycle. Set the operation of the cup wa...
Page 23
21 “l anguage” menu for changing the language of the display. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. Language turn off illumination. “cup illumination” menu this function allows activating/ d...
Page 24: Programming The Machine
22 programming the machine rinsing on off “rinse” menu to clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water only. In this menu you can: deactivate the rinse cycle. Activate the rinse cycle. Note: this rinse cycle is performed every time t...
Page 25
23 in this menu you can: activate/deactivate a machine ready tone. Activate/deactivate a tone each time a button is pressed. Activate/deactivate a tone that reminds the user to proceed with washing the circuits to prepare milk. Note: the tones are divided in the following way: • long continuous tone...
Page 26: Programming The Machine
24 programming the machine beverage settings to adjust the general brew parameters of the various beverages containing coffee, press the “beverage settings” button on the main menu. The current programming status is indicated according to each parameter. Adjustment of the coffee brew temperature to ...
Page 27
25 “aroma” adjustment for coffee brewing to set the “aroma” function, that is to say the quantity of coffee to be ground, and to set the use of pre-ground coffee. You can have your beverage with the quantity of coffee you desire or you can choose to prepare it with decaffeinated coffee by using the ...
Page 28: Programming The Machine
26 “coffee of the world” function this function allows the user to prepare coffee according to the most famous recipes in the world. Coffee of the world espresso italiano ristretto goodnight milk café creme café american coffee goodmorning coffee prepare a true italian ristretto. Prepare a typical n...
Page 29
27 this message remains active for approximately 5 seconds and then returns to the main message. American coffee the beverages in the “coffee of the world” function, if saved, will be associated with the following buttons, and accompanied by an asterisk: • ristretto: • italian espresso: • coffee: • ...
Page 30: Programming The Machine
28 beverage counters beverage counter function this function shows how many beverages have been prepared for every single type of beverage. Hot milk 0 latte macchiato 1 cappuccino 0 espresso macchiato 0 hot water 0 coffee long 15 coffee 0 espresso 0 programming the machine this function shows the ma...
Page 31
29 after use, always remove the milk container and put it in the refrigerator. The container may be left in the machine only if it has been washed with drinking water and it does not contain milk; see page 42. Coffee cleaning cycle maintenance descaling cycle lock display maintenance to clean/mainta...
Page 32: Programming The Machine
30 programming the machine milk circuit wash cycle to rinse the machine’s internal circuits used for preparing milk. This cycle is proposed after 14 days from the fi rst dispensing of a milk-based beverage. After 14 days, the “milk cleaning” message starts fl ashing (see page 15). Perform the wash cyc...
Page 33
31 add cleaner to milk conteiner milk cleaning cycle cleaning... Milk cleaning cycle fill the milk container with fresh water up to the «max» level. 7 8 position an adequately sized container under the milk spout. The second milk container may be used as well. The wash cycle starts automatically. Wa...
Page 34: Programming The Machine
32 13 14 16 rinsing... Milk cleaning cycle rinse the milk container milk cleaning cycle fill milk container with cold water milk cleaning cycle wait… when the rinse cycle has fi nished the above message will appear. Remove the milk container. Rinse the container and fi ll it with fresh water. Perform ...
Page 35
33 coffee circuit cleaning cycle (brew group wash cycle) to clean the machine’s internal circuit used for brewing coffee. It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly. Packages of saeco detergent tablets may be purchased at your local dealer or by authorized...
Page 36: Programming The Machine
34 2 1 saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturer’s instructions and/or according to the regulations enforced...
Page 37
35 1 ciclo di risciacquo 3 2 5 4 6 the machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective. In order to run a descaling cycle before the machine indicates the necessity t...
Page 38: Programming The Machine
36 current time 09:45 (am) time settings time format current weekday thursday time setting to set all the parameters relating to the clock and calendar. Important: to correctly program the times for turning the machine on and off, press the “timer settings” button. View the current time setting. Vie...
Page 39
37 time format to set the time view mode. This setting adjusts all clock functions to either “am/pm” or “24 hour” formats. To set the time view mode, press the “time format” button. The modifi catino is immediately applied and in small writing appears ‘am/pm” or “24 hour”. Automatic timer settings wi...
Page 40: Programming The Machine
38 08h (am) turn machine on 15 min setting an interval for turning on the machine in order to program an interval for turning on the machine, press the button for the interval that you wish to set. Adjust the hour to turn on by pressing + or - adjust the minutes by pressing + or - to save the adjust...
Page 41
39 energy saving settings to set after what duration of time, from the last dispensed beverage, the machine will go into stand-by mode. The default setting is "after 3 hours". When the selected duration of time has passed, the display reads “stand-by”. To activate the machine, press “start”. After h...
Page 42: Programming The Machine
40 factory settings the function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the original settings. Press the “factory settings” button. If "yes" is selected, a subsequent confi rmation by inverted switch buttons is requested...
Page 43: Cleaning and Maintenance
41 cleaning and maintenance 1 2 3 1 6 5 4 maintenance during operation during normal operation, the “empty dreg drawer” message may appear. This operation must be performed when the machine is on. If the coffee grounds drawer is emptied with the machine off or when it is not signalled on the display...
Page 44: Cleaning and Maintenance
42 cleaning and maintenance the milk container and the cappuccinatore have been designed to optimize the milk froth. Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour excellent milk-based beverages. It is recommended to rinse the cappuccinatore befor...
Page 45
43 remove the cappuccinatore. Thorough maintenance of the cappuccinatore thoroughly wash the cappuccinatore at least once a week. The components may be washed with household detergents. Separate the upper part of the cappuccinatore from the lower part. Remove the cover. Remove the cap from the lower...
Page 46: Cleaning and Maintenance
44 4 2 1 3 press to open the service door. The brew group must be cleaned at least once a week. Lubricate the brew group after approximately 500 brewing cycles. The grease for the lubrication of the brew group may be purchased by authorized service centres. Wash the brew group with warm water. Warni...
Page 47
45 6 5 4 adjust until it clicks. Remove screws and service door. Unscrew the screw that holds the service door closed. Then reposition the door and attach it with the previously removed screw. Hopper «a» hopper «a» 6 5 4 adjust until it clicks. Remove screws and service door. Unscrew the screw that ...
Page 48: Error Codes
46 error codes guide message that appears how to remove the message restart the machine turn off and after 30 minutes turn the machine on again to restore normal operation. Call assistance problem that requires the intervention of the customer service center. Insert drip tray insert drip tray under ...
Page 49: Error Codes / Technical Data
47 error codes / technical data subject to engineering and manufacturing changes due to technological developments. The machine conforms to the european directive 89/336/eec (italian legislative decree 476 dated 04/12/92) concerning electromagnetic compatibility. Nominal voltage see label on the app...
Page 50: Sos
48 sos in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for foaming milk. • for domestic use. • this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental cap...
Page 51
49 • never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. • do not insert objects through the appliance’s openings. (danger! Electrical current!). • do not pull out the plug by yanking on the power cord or touching it with wet hands. • warning. Danger of bur...
Page 52: Sup 030 Udr
R & d manager mr. Andrea castellani ec declaration of conformity ec 2006/95, ec 2004/118, ec 1992/31, ec 1993/68 saeco international group s.P.A - via torretta, 240 - 40041 gaggio montano (bo) - italy declare under our responsability that the product: automatic coffee maker sup 030 udr to which this...
Page 53
Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com the manufacturer reserves the right to change the features of the product without prior notice. © saeco international group s.P.A. T y p e s u p 0 30 u d r c o ...