- DL manuals
- Saeco
- Coffee Maker
- 10002772
- Operation And Maintenance Manual
Saeco 10002772 Operation And Maintenance Manual
Summary of 10002772
Page 1
Operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules. For household use only.
Page 2
Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug...
Page 3
Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...
Page 4: Contents
2 contents general information ......................................................................................................................... 3 technical data .....................................................................................................................................
Page 5: General Information
3 this coffee machine is made for brewing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by:...
Page 6: Appliance
4 touch screen display appliance pre-ground bypass doser accessories brew group dregdrawer socket for power cord coffee bean hopper power button service door coffee bean hopper lid drip tray sbs dial dispensing head drip tray + grill hot water / steam wand water tank hot water / steam knob cup warmi...
Page 7: Installation
5 1 2 3 4 7 6 5 when the correct temperature is reached, the machine performs a priming of the water circuit and a rinse cycle of the internal circuits. A small quantity of water is dispensed. Wait for this cycle to be completed automatically. (see page 22 to enable/disable the rinse function.) inst...
Page 8: Setting The Language
6 1 2 1 2 1 2 3 4 a b c 3 4 5 6 when the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverage to the typical parameters of the country where the machine is used. This is why some languages are differen...
Page 9: Intenza Water Filter
7 5 9 7 6 8 1 2 3 4 place a container beneath the hot water / steam wand. Turn the knob until the position is reached. Water dispensing begins. On reload water fi lter 1.2.4 water settings rinse on water hardness 3/4 water fi lter off have you replaced the old water fi lter with a new one? Press “re...
Page 10: Control Panel
8 • to brew the desired coffee, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. • press the icon twice to make 2 cups. Press twice control panel switch to text format enter the programming menu it is possible to change the type of displ...
Page 11: Coffee Strength
9 light medium strong the color intensity of the icon indicates the aroma - the quantity of coffee to be ground for each beverage. The greater the quantity of coffee ground, the stronger the coffee will taste. Aroma opti-dose (adjusts the coffee dose per cup) pre-ground medium coffee strong coffee m...
Page 12: Saeco Adapting System
10 to raise the drip tray, press lightly on the lower part of the button. To lower the drip tray, press lightly on the upper part of the button. When the desired height is reached, release the button. Drip tray height adjustment adjust the drip tray to the appropriate cup size before selecting the b...
Page 13: Coffee Grinder Adjustment
11 the machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed down and turned by means of the supplied grinder adjustment key only. ...
Page 14: Beverage Dispensing
12 1 2 3 4 5 choose a beverage and press the corresponding icon on the display: once for 1 cup or twice for 2 cups. The machine begins grinding the set quantity of coffee. The machine begins dispensing the selected beverage. Beverage dispensing coffee brewing can be stopped at any time by pressing «...
Page 15
13 4 2 1 3 6 5 the machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be scooped into the bypass doser next to the coffee bean hopper. Only use coffee that is ground specifi cally for espresso machines and never coffee beans or instant coffee. Warning: only put pre...
Page 16: Beverage Dispensing
14 1 4 5 6 7 2 3 8 9 beverage dispensing place a container beneath the hot water / steam wand. Turn the knob to the position. Wait until the machine has dispensed the desired quantity of water. When the machine has dispensed the desired quantity, turn the knob until it is in the rest position ( ). T...
Page 17: Steam Dispensing
15 1 5 6 7 2 3 4 8 9 place a container with the beverage to be frothed beneath the hot water / steam wand heat the beverage by gently swirling the container while steam is dispensed. When you have fi nished, turn the knob until it is in the rest position ( ). After dispensing steam, clean the steam ...
Page 18: Beverage Dispensing
16 3 4 5 6 1 8 2 7 9 beverage dispensing steam hot water steam select steam (see steps 2 and 3 on page 15). Immerse the hot water / steam wand in the milk. Turn the knob to the position. The machine may take a few seconds to warm up before steam is dispensed. Froth the milk by gently swirling the cu...
Page 19: Milk Island (Optional)
17 1 2 6 7 8 3 4 5 milk island - 08 t ype mki002 milk island - 04 t ype mki001 milk island (optional) this device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the milk island, read the manual and all precautions carefu...
Page 20: Beverage Settings
18 beverage settings beverage programming menu hold down the desired beverage icon for two seconds every beverage may be programmed according to your individual tastes. To program a beverage: once a beverage has been customized, the machine will use these saved settings when brewing that particular ...
Page 21: Coffee Settings
19 1 2 3 4 5 6 to brew a different amount of coffee than the one preset by the manufacturer, press “custom coffee dose” before the end of the brewing cycle in progress. When the desired quantity is reached, press " ". By pressing “start!” the machine will perform a brewing cycle. The machine will au...
Page 22: Programming The Machine
20 programming the machine some of the machine’s functions may be programmed according to your individual preferences. Press "menu". The main programming menu will appear. Machine settings (see page 21) beverage settings (see page 23) time/date settings (see page 24): - current date and time; - stan...
Page 23: Machine Settings
21 change the display language. Machine settings this function allows you to set the menu language and the display contrast. Adjust the contrast of the display. This function activates/deactivates the acoustic tones. Activate/deactivate a tone every time the machine is ready. Activate/deactivate a t...
Page 24: Programming The Machine
22 programming the machine machine settings activate/deactivate the warning to replace the water fi lter. Activate/deactivate the rinse function to briefl y clean the internal circuits of the machine. This function is activated by default by the manufacturer. Note: the rinse cycle is performed every...
Page 25: Beverage Settings
23 beverage settings this menu allows you to adjust the general brew parameters of the various types of coffee. Press “beverage settings” on the main menu. Select a beverage to adjust the specifi c functions and settings. Prebrewing slightly dampens the coffee grounds before brewing so as to bring o...
Page 26: Programming The Machine
24 programming the machine time/date settings in this menu, you can set the current time, the stand-by timer and the energy saving function. Press “time/date settings” from the main menu. Set all the parameters concerning the current time. Set the current time on the machine (displayed on the main s...
Page 27
25 this function allows the machine to be turned on and off (stand-by) at specifi c times. The machine performs this function only if it is switched on via the power button. To set the fi rst switch-on interval to set the third switch-on interval to set the second switch-on interval note: after havi...
Page 28: Maintenance
26 maintenance maintenance settings in this menu, adjustments can be made to clean/maintain all the machine’s internal circuits. Press “maintenance settings” on the main menu. This function enables the descaling cycle (the machine indicates how many liters can be dispensed before descaling). This fu...
Page 29
27 5 2 4 3 1 6 press “boiler descaling cycle” boiler descaling cycle in this menu, the machine performs an automatic descaling cycle. Descaling is necessary every 1-2 months or when the machine indicates it. The machine must be turned on and will automatically manage the dispensing of the descaling ...
Page 30: Maintenance
28 7 13 8 9 10 11 12 14 when the solution is fi nished the following message appears on the display: remove the water tank, rinse with fresh drinking water to eliminate traces of the descaling solution, then refi ll with fresh drinking water. Insert the tank back onto the machine. Rinse the machine’...
Page 31: Factory Settings
29 1 2 3 press the “factory settings” button. If “yes” is selected, a subsequent confi rmation is requested, by inverted keys. By selecting “yes” the factory settings are restored. All the custom settings will be lost and cannot be recovered. After restoring factory settings, you must, if desired, re...
Page 32: Cleaning And Maintenance
30 1 2 3 1 2 5 4 6 cleaning and maintenance switch off the machine and unplug it. Clean the tank and the cover. Remove the drip tray, empty and wash it with soap and water. Do not wash it in the dishwasher. Remove the dregdrawer. Remove and wash the wand support; then re-insert it. Remove the outer ...
Page 33: Cleaning The Brew Group
31 1 8 9 2 5 6 7 3 4 the brew group must be cleaned at least once a week. Before removing the group, remove the coffee dregdrawer as shown on page 30. Wash the brew group with lukewarm water. Lubricate the brew group after approximately 500 brewing cycles. The brew group lubricant can be purchased t...
Page 34: Error Codes
32 error codes guide message that appears how to remove the message close the coffee bean hopper lid to be able to make a beverage. Fill the coffee bean hopper with coffee beans. Insert the brew group in its place (page 31). Insert the dregdrawer. Close coffee bean lid add coffee beans insert brew g...
Page 35
33 guide message that appears how to remove the message remove the dregdrawer and empty the grounds. Note: the dregdrawer must be emptied only when the machine requires it and when the machine is turned on. If you empty the drawer with the machine turned off it will not reset the count of cycles. Cl...
Page 36: Error Codes
34 guide message that appears how to remove the message turn the knob in the direction shown until it reaches the rest position ( ). Change water fi lter the water fi lter must be replaced in the following cases: 1. 60 liters of water have been dispensed; 2. 60 days have passed since its installatio...
Page 37: Sos
35 sos in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for frothing milk. • for domestic use. • this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental ca...
Page 38: Safety Rules
36 safety rules dangers • the appliance must not be used by children and persons who have not been informed of its operation. • the appliance is dangerous to children. When left unattended, unplug from the electrical outlet. • keep the coffee machine packaging out of the reach of children. • never d...
Page 39: Sup 032Ar
37 r & d manager mr. Andrea castellani ec declaration of conformity ec 2006/95, ec 2004/118, ec 1992/31, ec 1993/68 saeco international group s.P.A - via torretta, 240 - 40041 gaggio montano (bo) - italy declare under our responsability that the product: automatic coffee maker sup 032ar to which thi...
Page 40
Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com © saeco international group s.P.A. The manufacturer reserves the right to change the features of the product without prior notice. T y p e s u p - 03 2 a r c o ...