1. DL manuals
  2. Saeco
  3. Coffee Maker
  4. 10002775
  5. Operation And Maintenance Manual

Saeco 10002775 Operation And Maintenance Manual - Hot Water Dispensing

Manual is about: SAECO TALEA RING V2 TITANIUM SUP032NR

Summary of 10002775

  • Page 1

    Operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules. For household use only.

  • Page 2

    Iv important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, p...

  • Page 3

    V caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside t...

  • Page 4: Contents

    2 contents general information ................................................................................................................... 3 technical data ............................................................................................................................... 3 applia...

  • Page 5: General Information

    3 this coffee machine is suitable for preparing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caus...

  • Page 6: Accessories

    4 pre-ground bypass doser accessories water hardness test strip appliance pre-ground coffee measuring scoop and grinder adjustment key power cord brew group dregdrawer socket for power cord coffee bean hopper power button service door coffee bean hopper lid drip tray control panel sbs dial dispensin...

  • Page 7: Installation

    5 1 2 3 4 7 6 5 installation insert the plug into the socket located on the back of the machine and insert the other end into a power outlet with suitable current. Place a container beneath the hot water/steam wand. Remove the coffee bean hopper lid. Fill the hopper with coffee beans. Close the lid ...

  • Page 8: Installation

    6 1 2 3 4 5 6 2. 1. 1 2 1 2 3 4 a b c installation setting the language 2.1 language english rinse cycle please wait medium aroma espresso 2.1 language english warming up when the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows you to adjust...

  • Page 9: Intenza Water Filter

    7 4 5 1 3 6 7 8 9 2 insert the fi lter in the empty tank. The reference mark and the groove must match. Push fi rmly until it is completely inserted. Select “fi lter” and press again. When the machine has fi nished, turn the knob until it is in the rest position ( ). Press a few times until the “exi...

  • Page 10: Control Panel

    8 • press the button twice to make 2 cups. This operation can be performed up until the grinding of the fi rst cup is complete. Press twice control panel access the programming menu click wheel selects the aroma (amount of coffee ground per cup) or selects pre-ground coffee steam button brew button ...

  • Page 11: Coffee Strength

    9 medium coffee strong coffee mild coffee sbs adjusts the fullness of the brewed coffee. The coffee may even be adjusted while brewing. This adjustment has an immediate effect on the selected type of brewing. Coffee strength sbs – saeco brewing system adjustments the sbs dial has been carefully desi...

  • Page 12: Saeco Adapting System

    10 saeco adapting system the drip tray height is adjustable to fi t different sized cups. To adjust the drip tray, lift it or lower it manually until it reaches the desired height. Adjusting the height of the drip tray adjust the drip tray to the appropriate cup size before selecting the beverage. C...

  • Page 13: Coffee Grinder Adjustment

    11 the machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed down and turned using the supplied grinder adjustment key only. Press ...

  • Page 14: Brewing With Whole Beans

    12 3 4 5 1 2 coffee brewing can be stopped at any time by pressing the button again. The steam wand may reach high temperatures: danger of scalding. Do not touch it with bare hands. Check that all the containers are clean. To carry out this operation, follow the instructions in the “cleaning and mai...

  • Page 15

    13 4 1 2 5 3 dispensing beverages with ground coffee the machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be scooped into the bypass doser positioned next to the coffee bean hopper. Only use coffee that is ground specifi cally for espresso machines and never coff...

  • Page 16: Hot Water Dispensing

    14 1 2 3 5 6 7 4 hot water dispensing dispensing may be preceded by short spurts of hot water and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Beverage dispensing press the button. Place a container bene...

  • Page 17: Dispensing Steam

    15 1 2 3 5 6 7 4 dispensing steam press the button. Place a container with the beverage to be frothed beneath the hot water/steam wand. Turn the knob to the position. Heat the beverage by gently swirling the container while steam is dispensed. When you have fi nished, turn the knob until it is in th...

  • Page 18: Beverage Dispensing

    16 3 2 4 5 6 1 8 7 beverage dispensing cappuccino dispensing may be preceded by short spurts of hot water and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Press the button. Immerse the hot water/steam wa...

  • Page 19: Milk Island (Optional)

    17 1 2 3 5 4 6 7 8 milk island - 08 t ype mki002 milk island - 04 t ype mki001 milk island (optional) this device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the milk island, read the manual and all precautions carefu...

  • Page 20: Beverage Settings

    18 beverage settings the following page describes how to program coffee beverages; the programmable settings for each beverage may differ depending on the type of beverage. Programming from the “beverage settings” menu to adjust the settings for preparing beverages: press the button and select “bev....

  • Page 21

    19 1 2 3 4 5 6 7 8 9 10 check that the water tank and coffee bean hopper are full; place the cup under the dispensing head. Press the button. Press the button a few times to adjust the quantity of coffee to be ground or select the use of pre- ground coffee. Press the button to save. Select the bever...

  • Page 22: Programming The Machine

    20 programming the machine some of the machine’s functions can be programmed according to your individual preferences. Beverage settings (see page 18) machine settings (see page 21) maintenance settings (see page 22) to exit the programming mode: energy saving (stand-by) (see page 23) special functi...

  • Page 23: Machine Settings

    21 machine settings 2.1 language english 2.3 acoust.Alert on 2.4 filter alarm on 2.5 rinsing on 2.2 water hardn. 3 2 mach. Settings to change the machine operation settings, press the button, select “mach. Settings” and press the button. Navigate the click wheel with your fi nger. Change the display...

  • Page 24: Programming The Machine

    22 programming the machine access the descaling menu. To access the machine maintenance programs, press the button, scroll to “maintenance” and press the button. Navigate the click wheel with your fi nger: access the water fi lter menu. Clean the machine’s internal circuits used for brewing coffee. ...

  • Page 25: Special Functions

    23 to adjust the energy saving parameters of the machine, press the button, select “energy saving” (stand-by) and press the button. Set the time which must pass before the machine enters the energy saving mode (stand-by). By default, the turn-off delay time is set to 60 minutes. This menu provides a...

  • Page 26: Maintenance

    24 1 2 3 6 4 5 this menu performs the automatic descaling cycle. Descaling is necessary every 1-2 months, when water dispenses more slowly than normal, or when the machine indicates the need to descale. The machine must be turned on and will automatically manage the dispensing of the descaling agent...

  • Page 27

    25 7 8 9 10 12 13 14 15 11 when the above message appears, the boiler is at the right temperature. Insert descaler ok to start pour the descaling solution into the tank. Insert the tank into the machine. Press the button to start. Insert descaler ok to start when the solution is fi nished the follow...

  • Page 28: Maintenance

    26 16 2 3 5 6 1 4 turn the knob until it is in the rest position ( ). Maintenance check the quantity of water contained in the tank and, if desired, install the water fi lter again or re-insert the small white fi lter (see page 7). When descaling is complete, return to the main menu to brew beverage...

  • Page 29: Cleaning And Maintenance

    27 2 1 2 4 5 3 1 6 cleaning and maintenance switch off the machine and unplug it. Clean the tank and the cover. Remove the drip tray, empty and wash it with soap and water. Do not wash it in the dishwasher. Remove the dregdrawer. Remove and wash the wand support; then re-insert it. Remove the outer ...

  • Page 30: Cleaning The Brew Group

    28 1 2 5 8 9 6 7 3 4 wash the brew group and the fi lter and dry. Press the push button to remove the brew group. Insert the washed and dried brew group. Do not press the “push” button. Make sure the brew group is in rest position; the two references must match. Cleaning the brew group make sure the...

  • Page 31: Error Codes

    29 error codes guide message that appears how to remove the message out of service (xx) restart to fix… (xx) identifi es an error code.Turn off and after 30 seconds turn the machine on again to restore normal operation.If the problem persists, call saeco or an authorized service center and give the ...

  • Page 32: Troubleshooting

    30 troubleshooting p roblems c auses s olutions the machine does not turn on. The machine is not connected to the power source. Connect the machine to the power source. The plug has not been plugged into the back of the machine. Insert the plug into the machine’s power socket. Hot water or steam is ...

  • Page 33: Safety Rules

    31 safety rules in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for frothing milk. • for domestic use. • this appliance is not intended for use by persons (including children) with reduced physical, sensory or ...

  • Page 34: Safety Rules

    32 concentration of dust or oily substances suspended in the air. • do not install the machine on top of other appliances. Dangers • the appliance must not be used by children and persons who have not been informed of its operation. • the appliance is dangerous to children. When left unattended, unp...

  • Page 35: Sup 032Nr

    33 r & d manager mr. Andrea castellani ec declaration of conformity ec 2006/95, ec 2004/118, ec 1992/31, ec 1993/68 saeco international group s.P.A - via torretta, 240 - 40041 gaggio montano (bo) - italy declare under our responsability that the product: automatic coffee maker sup 032nr to which thi...

  • Page 36

    Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com © saeco international group s.P.A. The manufacturer reserves the right to change the features of the product without prior notice. T y p e s u p - 03 2 n r c o ...