Saeco Intelia Deluxe User Manual - Ordering Accessories Saeco

1

Coffee grinder blocked

Coffee exit duct

clogged

Clean the coffee exit

duct thoroughly with

the handle of the

multifunctional tool or a

spoon handle.

3 - 4

The brew group cannot

be removed.

The brew group is not

positioned correctly.

Close the maintenance

door. Switch the

machine off and back

on again. Wait for the

‘machine ready’ icon on

the display and then

remove the brew group.

5

Water circuit problem

There is air in the water

circuit.

Remove and place back

the water tank a couple

of times. Make sure you

insert it into the

machine properly.

Check if the water tank

compartment is clean.

Other error codes

Switch the machine off

and switch it back on

again after 30 seconds.

Try this 2 or 3 times.

If the above solutions do not help to remove the error code icon from the

display and bring the machine back to normal working order, contact the

Philips Saeco hotline. Contact details can be found in the warranty booklet

or on www.saeco.com/support.

Ordering accessories Saeco

To clean and descale the machine, only use the Saeco maintenance

products. These products can be purchased in the Philips online shop (if

available in your country) at www.shop.philips.com/service, from your local

reseller or from the authorized service centers.

Ordering maintenance products:

Typenumber

Product

CA6700

Descaling solution

CA6903

AquaClean filter

HD5061

Brew group grease

CA6704

Degreasing tablets

CA6705

Milk circuit cleaner

Guarantee and support 

If you need information or support, please visit www.saeco.com/support or

read the separate guarantee leaflet.

22

English