1. DL manuals
  2. Saeco
  3. Coffee Maker
  4. Moltio HD8766
  5. User manual

Saeco Moltio HD8766 User manual - Important

Other manuals for Moltio HD8766: User Manual, Quick Instruction Manual

Summary of Moltio HD8766

  • Page 1

    English user manual read carefully before using the machine. Register your product and get support at www.Philips.Com/welcome type hd8766 - hd8767 en 02 02.

  • Page 2

    Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug...

  • Page 3

    Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...

  • Page 4

    2 english contents important..................................................................................................... 4 safety instructions ....................................................................................................................................4 warning .........

  • Page 5

    3 english espresso and coffee brewing ....................................................................30 espresso and coff ee brewing using coff ee beans .....................................................................................30 espresso and coff ee brewing using pre-ground coff ee ...

  • Page 6: Important

    4 english important safety instructions this machine is equipped with safety features. Nevertheless read the safety instructions carefully and only use the ma- chine as described in these instructions to avoid accidental injury or damage. Keep this user manual for future reference. The term warning ...

  • Page 7: Caution

    5 english 5 • remove the mains plug from the wall socket: - if a disturbance occurs. - if the machine will not be used for a long time. - before cleaning the machine. Pull on the plug, not on the mains cord. Do not touch the mains plug with wet hands. • do not use the machine if the mains plug, the ...

  • Page 8

    6 english • do not place the machine on a hot plate, directly next to a hot oven, heater or similar source of heat. • only put coff ee beans into the coff ee bean hopper. If ground coff ee, instant coff ee or any other substance is put in, it may damage the machine. • allow the machine to cool befor...

  • Page 9: Compliance With Standards

    7 english 7 compliance with standards the machine complies with art.13 of the italian legislative decree dated 25 july 2005, no. 151 “implementation of the directives 2005/95/ec, 2002/96/ec and 2003/108/ec on the restriction of the use of certain hazardous substances in electri- cal and electronic e...

  • Page 10

    8 installation product overview 17 21 22 19 23 20 32 18 1 2 3 11 12 13 14 5 4c 4b 4a 6 7 8 9 24 26 27 29 25 28 16 15 10 30 31.

  • Page 11

    9 english 9 general description 1. Coff ee bean hopper locking/removal selector 2. Pre-ground coff ee compartment 3. Storage area for cups 4a. Coff ee bean hopper 4b. Coff ee bean hopper tray 4c. Coff ee bean hopper lid 5. Control panel 6. Coff ee dispensing spout 7. Cup holder grill 8. Full drip tr...

  • Page 12

    10 english preparing for use machine packaging the original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport. Machine installation 1 remove the drip tray with grill from the packaging. 2 rem...

  • Page 13

    11 english 11 5 push gently on the edge of the water tank door to release the hand- grip. 7 rinse the water tank with fresh water. 8 fill the water tank with fresh water up to the max level and slide it back into the machine. Make sure it is fully inserted. Caution: never fi ll the water tank with w...

  • Page 14

    12 english 13 switch the power button to “i” to turn on the machine. The red led next to the “ ” button blinks. Y ello w 14 to turn on the machine, simply press the “ ” button. The control panel indicates that the circuit must be primed. 11 insert the plug into the socket located on the back of the ...

  • Page 15

    13 english 13 using the machine for the first time when using the machine for the fi rst time, the following activities need to happen: 1) you need to prime the circuit; 2) the machine will perform an automatic rinse/ self-cleaning cycle; 3) you need to initiate a manual rinse cycle. Circuit priming...

  • Page 16

    14 english automatic rinse/self-cleaning cycle when warm-up is completed, the machine automatically performs a rinse/ self- cleaning cycle of the internal circuit with fresh water. This takes less than a minute. 1 place a container under the coff ee dispensing spout to catch the small amount of wate...

  • Page 17

    15 english 15 2 check that the machine shows this display. Gr een 3 select the pre-ground coff ee brewing function by pressing the “ ” button. The machine shows this display. Note: do not add pre-ground coff ee into the compartment. 4 press the “ ” button. The machine starts dispensing water. 5 when...

  • Page 18

    16 english red 9 once the water has been dispensed, remove and empty the container. 11 at the end, fi ll the water tank again up to the max level. Now the ma- chine is ready for brewing coff ee. You will see the display as shown at the left. Note: when you haven’t used the machine for 2 or more week...

  • Page 19

    17 english 17 measuring and programming water hardness measuring water hardness is very important for defi ning the frequency in which the machine has to be descaled and to install the “intenza+” water fi lter (for more detail on the water fi lter see next chapter). To measure the water hardness fol...

  • Page 20

    18 english 7 press the “ ” button to exit the programming menu. Now the ma- chine is ready to brew. “intenza+” water fi lter installation we recommend you to install the “intenza+” water fi lter as this prevents limescale to build up in your machine and preserves a more intense aroma to your coff ee...

  • Page 21

    19 english 19 2 remove the “intenza+” water fi lter from its packaging, immerse it ver- tically (with the opening positioned upwards) in cold water and gently press the sides so as to let the air bubbles out. 3 set the “intenza+” water fi lter according to the measurements per- formed (see previous ...

  • Page 22

    20 english 9 press the “ ” button to select “on” and press the “ ” menu button to confi rm. Y ello w replacing the “intenza+” water fi lter when the “intenza+” water fi lter needs to be replaced with a new one, the following icon is displayed. 1 replace the “intenza+” water fi lter as described in t...

  • Page 23

    21 english 21 y ello w gr een 4 to exit, press the “ ” button. Now the machine is ready to brew. The machine is now programmed to manage a new fi lter. Note: if the “intenza+” water fi lter is already installed and you want to remove but not replace -it, select the “off” option instead. If there is ...

  • Page 24

    22 english 2 lift the sides of the coff ee bean hopper with both hands as shown in the image. Caution: do not remove the bean hopper in a diff erent way to avoid spilling coff ee beans. 3 after removal put the protection cover on the machine to prevent dust. Note: if you turn on the machine while th...

  • Page 25

    23 english 23 3 remove any beans from the coff ee bean hopper compartment. 4 insert the coff ee bean hopper into the compartment as shown on the image. 5 switch the selector to the “ ” position. Warning: please be aware that when you change coff ee blend and switch to decaff einated coff ee, still s...

  • Page 26

    24 english coff ee bean selection this function allows you to optimize the grinding for selected type of cof- fee beans. Y ello w gr een gr een gr een 2 press the “ ” button or the “ ” button to select the type of coff ee beans in the coff ee bean hopper. 3 press the “ ” menu button to confi rm the ...

  • Page 27

    25 english 25 gr een coff ee emptying cycle if you want to change coff ee beans, we recommend that you empty the coff ee duct and grinder. In this way you will taste the full aroma of the new coff ee beans. For this follow the steps below. 1 insert the coff ee bean hopper with the new coff ee beans....

  • Page 28

    26 english adjustments the machine allows for certain adjustments so that you can brew the best possible coff ee tasting. Saeco adapting system coff ee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting syst...

  • Page 29

    27 english 27 1 2 2 press and turn the grinder adjustment knob under the coff ee bean hopper one notch at a time. Use the coff ee grinder adjustment key provided with the machine. You will taste the diff erence after brewing 2-3 cups of coff ee. Warning: do not turn the grinder more than 1 notch at ...

  • Page 30

    28 english adjusting the coff ee dispensing spout the height of the dispensing spout can be adjusted to better fi t the dimen- sions of the cups that you wish to use. Move the dispensing spout up or down with your fi ngers to adjust its height as shown in the image. The recommended positions are: fo...

  • Page 31

    29 english 29 adjusting the coff ee length the machine allows you to adjust the amount of brewed coff ee according to your taste and/or the size of your cups. Each time the “ ” or “ ” button is pressed, the machine brews a pre-set amount of coff ee. Each button may be individually programmed for a s...

  • Page 32

    30 english espresso and coffee brewing before brewing the coff ee, make sure that there are no warnings shown on the control panel, and that the water tank and coff ee bean hopper are fi lled. Espresso and coff ee brewing using coff ee beans 1 place 1 or 2 cups under the dispensing spout. Gr een gr ...

  • Page 33

    31 english 31 espresso and coff ee brewing using pre-ground coff ee this function allows you to use pre-ground and decaff einated coff ee. With the pre-ground coff ee function you can only brew one coff ee at a time. 1 press the “ ” button to select the pre-ground coff ee function. Gr een 2 lift the...

  • Page 34

    32 english steam dispensing/cappuccino brewing warning: danger of scalding! Dispensing may be preceded by small jets of hot water. The classic milk frother may reach high temperatures: never touch it with bare hands. Use the appropriate protective handle only. 1 fill 1/3 of a container with cold mil...

  • Page 35

    33 english 33 4 press the “ ” button to start dispensing steam. 5 the following icon is displayed during pre-heating time required by the machine. 6 froth the milk by gently swirling the container and moving it up and down. 7 when the milk froth has the desired consistency, press the “ ” button to s...

  • Page 36

    34 english hot water dispensing warning: danger of scalding! Dispensing may be preceded by small jets of hot water. The classic milk frother may reach high temperatures: never touch it with bare hands. Use the appropriate protective handle only. 1 place a container under the classic milk frother. Gr...

  • Page 37

    35 english 35 4 the following icon is displayed during pre-heating time required by the machine. 5 pour the desired amount of hot water. To stop the hot water dispens- ing, press the “ ” button. Cleaning and maintenance daily cleaning of the machine caution: timely cleaning and maintenance of your m...

  • Page 38

    36 english 1 empty and clean the coff ee grounds drawer daily with the machine turned on. - push gently on the edge of the door of the coff ee grounds drawer to release the handgrip. - remove the coff ee grounds drawer by pulling the handgrip. Other maintenance operations can only be carried out whe...

  • Page 39

    37 english 37 daily cleaning of the water tank 1 remove the small white fi lter or the intenza+ water fi lter (if installed) from the water tank and wash it with fresh water. 2 put the small white fi lter back or the intenza+ water fi lter (if installed) in its housing by gently pressing and turning...

  • Page 40

    38 english weekly cleaning of the classic milk frother the weekly cleaning is more thorough, since you need to disassemble all the classic milk frother components. The following cleaning operations are required: 1 remove the external part of the classic milk frother. Wash it with luke- warm water. W...

  • Page 41

    39 english 39 2 remove the coff ee grounds drawer. Open the service door. 3 remove and clean the coff ee residues drawer. 4 to remove the brew group, press the «push» button and pull it by the handle. 5 thoroughly wash the brew group with fresh, lukewarm water and care- fully clean the upper fi lter...

  • Page 42

    40 english 8 make sure the brew group is in the rest position; the two reference signs must match. If they do no match, proceed as described in step (9). 9 gently pull down the lever until it touches the brew group base and the two reference signs on the side of the brew group do match. 10 make sure...

  • Page 43

    41 english 41 12 insert the coff ee residues drawer and close the service door. 13 insert the coff ee grounds drawer. Weekly cleaning of the coff ee bean hopper, the tray and the com- partment clean the coff ee bean hopper, the tray and the coff ee bean hopper com- partment once a week with a cloth ...

  • Page 44

    42 english 2 lubricate the shaft too. Monthly lubrication of the brew group lubricate the brew group after approximately 500 cups of coff ee or once a month. You can purchase separately the saeco grease to lubricate the brew group. For further details, please refer to the maintenance products page i...

  • Page 45

    43 english 43 3 insert the brew group in its seat until it locks into place (see “weekly cleaning of the brew group” chapter). Insert the coff ee residues drawer. 4 close the service door. Insert the coff ee grounds drawer. Monthly cleaning of the brew group with “coff ee oil remover” besides weekly...

  • Page 46

    44 english 8 let the solution take eff ect for approximately 15 minutes. Make sure you discard the dispensed water. 9 switch the power button on the back of the machine to “i”. To turn on the machine press the “ ” button. Wait until the automatic rinse cycle has been completed. 10 remove the coff ee...

  • Page 47

    45 english 45 11 wash the brew group thoroughly with fresh water. 12 after rinsing the brew group, insert it again in its seat until it locks into place (see the “weekly cleaning of the brew group” chapter). Insert the coff ee residues drawer and the coff ee grounds drawer. Close the service door. 1...

  • Page 48

    46 english 2 remove the classic milk frother from the steam/hot water wand. 3 remove the “intenza+” water fi lter from the water tank if it was in- stalled and replace it with the small white original one. Place the water tank back into the machine. Y ello w 4 press the “ ” menu button and scroll th...

  • Page 49

    47 english 47 note: if you press the “ ” button by mistake, press the “ ” button to quit. 6 remove the water tank and pour the entire content of the descal- ing solution. Then fi ll the water tank with fresh water up to the calc clean level. 7 place the water tank back into the machine. Y ello w 8 p...

  • Page 50

    48 english 17 when this icon is displayed, the water tank is empty. Repeat steps 12 to 16. Then go to step 18. 16 press the “ ” button to start the rinsing cycle. 14 remove the water tank, rinse it and fi ll it up to the max level with fresh water. Place it back into the machine. When inserting the ...

  • Page 51

    49 english 49 y ello w 20 when the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displayed. Press the " " menu button to quit the descaling cycle. 21 press the“ ” button to prime the circuit. 22 the machine now carries out the warm-up and automati...

  • Page 52

    50 english programming you can adjust the machine functions to your personal preference by ac- cessing the program menu. The following parameters can be adjusted coff ee temperature this function allows you to adjust the coff ee brewing temperature. Y ello w coff ee bean selection this function allo...

  • Page 53

    51 english 51 how to program your machine in this example, it is shown how to program the coff ee temperature. Pro- ceed in the same way to program the other functions. The programming menu can only be accessed when the machine is on and shows this display. Gr een 1 press the " " menu button to ente...

  • Page 54

    52 english y ello w 5 when the display value is changed, the “ok” message appears. Press the “ ” menu button to confi rm the change. 6 press the “ ” button to exit the programming menu. Note: the machine will automatically exit the programming menu if you do not push any button for 3 minutes. The va...

  • Page 55

    53 english 53 meaning of the display symbols this machine is equipped with a colour-coded system to make the user’s understanding of the display signals easier. The icons are colour-coded according to the traffi c light principle. Ready signals (green colour) the machine is ready to brew coff ee wit...

  • Page 56

    54 english ready signals (green colour) the machine is brewing two cups of coff ee. Coff ee brewing using pre-ground coff ee in progress. The machine is programming the amount of coff ee to brew..

  • Page 57

    55 english 55 warning signals (yellow colour) the machine is heating up to brew beverages or dispense hot water. The machine is performing the rinse cycle. Wait until the machine has com- pleted the cycle. The machine needs the “intenza+” water fi lter to be replaced. The brew group is being reset d...

  • Page 58

    56 english warning signals (red colour) close the service door. Fill the coff ee bean hopper. The brew group must be inserted into the machine. Insert the coff ee grounds drawer. Empty the coff ee grounds drawer and the coff ee residues drawer. Fully insert the coff ee grounds drawer before turning ...

  • Page 59

    57 english 57 troubleshooting this chapter summarizes the most common problems you could encoun- ter with your machine. If you are unable to solve the problem with the information below, visit www.Philips.Com/support for a list of frequently asked questions or contact the philips saeco hotline in yo...

  • Page 60

    58 english note: these problems can be considered normal if the coff ee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a self-adjusting operation as described in section "saeco adapting system". Machine actions causes solutions coff ee ...

  • Page 61

    59 english 59 energy saving stand-by the saeco full automatic espresso machine is designed for energy saving, as stated by the class a energy label. After 30 minutes of inactivity, the machine turns off automatically. If a product has been brewed, the machine performs a rinse cycle. In stand-by mode...

  • Page 62

    60 english technical specification the manufacturer reserves the right to make changes to the technical specifi cations of the product. Nominal voltage - power rating - power supply see label on the inside of the service door housing material abs - thermoplastic size (w x h x d) 256 x 350 x 470 mm w...

  • Page 63

    61 english 61 ordering maintenance products for cleaning and descaling, use saeco maintenance products only. You can purchase these at the philips online shop at www.Shop.Philips.Com/service, your local dealer or at authorised service centres. If you have any diffi culties obtaining maintenance prod...

  • Page 64

    62 english machine accessories - removable coff ee bean hopper ca6803 - maintenance kit ca 6706.

  • Page 68

    Www.Philips.Com/saeco the manufacturer reserves the right to make changes without prior notice. Rev.00 del 05-02-13 02 en 02.