Saeco Moltio User manual

Manual is about: One Touch Cappuccino full automatic coffee machine (HD8769)

Summary of Moltio

  • Page 1

    English user manual read carefully before using the machine. Register your product and get support at www.Philips.Com/welcome type hd8769 en 02 02.

  • Page 2

    Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug...

  • Page 3

    Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...

  • Page 4

    2 english congratulations on your purchase of a saeco moltio one touch cappuccino full automatic coff ee machine! To fully benefi t from the support that saeco off ers, please register your product at www.Philips.Com/welcome. This user manual applies to hd8769. The machine is suitable for preparing ...

  • Page 5

    3 english milk carafe..................................................................................................33 filling the milk carafe .............................................................................................................................33 inserting the milk carafe ...

  • Page 6: Important

    4 english important safety instructions this machine is equipped with safety features. Nevertheless read the safety instructions carefully and only use the ma- chine as described in these instructions to avoid accidental injury or damage. Keep this user manual for future reference. The term warning ...

  • Page 7: Caution

    5 english 5 • remove the mains plug from the wall socket: - if a disturbance occurs. - if the machine will not be used for a long time. - before cleaning the machine. Pull on the plug, not on the mains cord. Do not touch the mains plug with wet hands. • do not use the machine if the mains plug, the ...

  • Page 8

    6 english • do not place the machine on a hot plate, directly next to a hot oven, heater or similar source of heat. • only put coff ee beans into the coff ee bean hopper. If ground coff ee, instant coff ee or any other substance is put in, it may damage the machine. • allow the machine to cool befor...

  • Page 9: Compliance With Standards

    7 english 7 compliance with standards the machine complies with art.13 of the italian legislative decree dated 25 july 2005, no. 151 “implementation of the directives 2005/95/ec, 2002/96/ec and 2003/108/ec on the restriction of the use of certain hazardous substances in electri- cal and electronic e...

  • Page 10

    8 installation product overview 17 21 22 19 23 20 33 18 1 2 3 11 10 12 13 14 5 6 7 8 9 24 26 27 29 30 15 25 28 16 31 32 4c 4b 4a.

  • Page 11

    9 english 9 general description 1. Coff ee bean hopper locking/removal selector switch 2. Pre-ground coff ee compartment 3. Storage area for cups 4a. Coff ee bean hopper 4b. Coff ee bean hopper tray 4c. Coff ee bean hopper lid 5. Control panel 6. Coff ee dispensing spout 7. Cup holder grill 8. Full ...

  • Page 12

    10 english preparing for use machine packaging the original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport. Machine installation 1 remove the drip tray with grill from the packaging. 2 rem...

  • Page 13

    11 english 11 5 push gently on the edge of the water tank door to release the hand- grip. 7 rinse the water tank with fresh water. 8 fill the water tank with fresh water up to the max level and reinsert it back into the machine. Make sure it is fully inserted. Caution: never fi ll the water tank wit...

  • Page 14

    12 english 13 switch the power button to “i” to turn on the machine. The red led next to the “ ” button blinks. Y ello w 14 to turn on the machine, simply press the “ ” button. The control panel indicates that the circuit must be primed. 11 insert the plug into the socket located on the back of the ...

  • Page 15

    13 english 13 using the machine for the first time when using the machine for the fi rst time, the following activities need to happen: 1) you need to prime the circuit; 2) the machine will perform an automatic rinse/ self-cleaning cycle; 3) you need to initiate a manual rinse cycle. Circuit priming...

  • Page 16

    14 english automatic rinse/self-cleaning cycle when warm-up is completed, the machine automatically performs a rinse/ self- cleaning cycle of the internal circuit with fresh water. This takes less than a minute. 1 place a container under the coff ee dispensing spout to catch the small amount of wate...

  • Page 17

    15 english 15 3 select the pre-ground coff ee brewing function by pressing the “ ” button. The machine shows this display. Note: do not add pre-ground coff ee into the compartment. 4 press the “ ” button. The machine starts dispensing water. 5 when the dispensing has fi nished, empty the container. ...

  • Page 18

    16 english 10 press the “ ” button to start dispensing hot water. Gr een 11 this icon is displayed. The machine reminds you to install the water dispensing spout. Check that the water dispensing spout is correctly installed. Press “ ” to confi rm. The machine will start dispensing hot water. Red 13 ...

  • Page 19

    17 english 17 14 at the end, fi ll the water tank again up to the max level. Now the ma- chine is ready for brewing coff ee. You will see the display as shown at the left. Note: when you haven’t used the machine for 2 or more weeks, the machine will automatically perform an automatic rinse/self-clea...

  • Page 20

    18 english measuring and programming water hardness measuring water hardness is very important for defi ning the frequency in which the machine has to be descaled and to install the “intenza+” water fi lter (for more detail on the water fi lter see next chapter). To measure the water hardness follow...

  • Page 21

    19 english 19 8 press the “ ” button to exit the programming menu. Now the ma- chine is ready to brew. “intenza+” water fi lter installation we recommend you to install the “intenza+” water fi lter as this prevents limescale to build up in your machine and preserves a more intense aroma to your coff...

  • Page 22

    20 english 2 remove the “intenza+” water fi lter from its packaging, immerse it ver- tically (with the opening positioned upwards) in cold water and gently press the sides so as to let the air bubbles out. 3 set the “intenza+” water fi lter according to the measurements per- formed (see previous cha...

  • Page 23

    21 english 21 10 press the “ ” button to select “on” and press the “ ” button to con- fi rm. Y ello w replacing the “intenza+” water fi lter when the “intenza+” water fi lter needs to be replaced with a new one, the following icon is displayed. 1 replace the “intenza+” water fi lter as described in ...

  • Page 24

    22 english y ello w gr een 5 to exit, press the “ ” button. Now the machine is ready to brew. The machine is now programmed to manage a new fi lter. Note: if the “intenza+” water fi lter is already installed and you want to remove but not replace it, select the “off” option instead. If there is no “...

  • Page 25

    23 english 23 2 lift the sides of the coff ee bean hopper with both hands as shown in the image. Caution: do not remove the bean hopper in a diff erent way to avoid spilling coff ee beans. 3 after removal put the protection cover on the machine to prevent dust. Red note: if you turn on the machine w...

  • Page 26

    24 english 3 remove any beans from the coff ee bean hopper compartment. 4 insert the coff ee bean hopper into the compartment as shown on the image. 5 switch the selector to the “ ” position. Warning: please be aware that when you change coff ee blend and switch to decaff einated coff ee, still some...

  • Page 27

    25 english 25 coff ee bean selection this function allows you to optimize the grinding for selected type of cof- fee beans. Y ello w gr een gr een gr een 2 press the “ ” button to access the programming menu. Scroll the pages by pressing the “ ” button until the following icon is displayed. 3 press ...

  • Page 28

    26 english coff ee emptying cycle if you want to change coff ee beans, we recommend that you empty the coff ee duct and grinder. In this way you will taste the full aroma of the new coff ee beans. For this follow the steps below. 1 insert the coff ee bean hopper with the new coff ee beans. Y ello w ...

  • Page 29

    27 english 27 adjustments the machine allows for certain adjustments so that you can brew the best tasting coff ee possible. Saeco adapting system coff ee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting s...

  • Page 30

    28 english 3 the reference marks in the compartment for the coff ee bean hopper indicate the grind setting. There are 5 diff erent grind settings to choose from position1 for coarse grind - lighter taste to position 2 for fi ne grind - bolder taste. When you adjust the ceramic coff ee grinder to a f...

  • Page 31

    29 english 29 adjusting the coff ee dispensing spout the height of the dispensing spout can be adjusted to better fi t the dimen- sions of the cups that you wish to use. Move the dispensing spout up or down with your fi ngers to adjust its height as shown in the image. The recommended positions are:...

  • Page 32

    30 english adjusting the coff ee length the machine allows you to adjust the amount of brewed coff ee according to your taste and/or the size of your cups. Each time the “ ” or “ ” button is pressed, the machine brews a pre-set amount of coff ee. Each button may be individually programmed for a spec...

  • Page 33

    31 english 31 espresso and coffee brewing before brewing the coff ee, make sure that there are no warnings shown on the control panel, and that the water tank and coff ee bean hopper are fi lled. Espresso and coff ee brewing using coff ee beans 1 place 1 or 2 cups under the dispensing spout. Gr een ...

  • Page 34

    32 english espresso and coff ee brewing using pre-ground coff ee this function allows you to use pre-ground and decaff einated coff ee. With the pre-ground coff ee function you can only brew one coff ee at a time. 1 press the “ ” button to select the pre-ground coff ee function. Gr een 2 lift the pr...

  • Page 35

    33 english 33 milk carafe this chapter explains how to use the milk carafe to prepare a cappuccino or frothed milk. Note: before using the milk carafe, clean it thoroughly as described in the “clean- ing and maintenance” chapter. We recommend fi lling it with cold milk (approx. 5°c). Warning: do not...

  • Page 36

    34 english inserting the milk carafe 1 if installed, remove the water dispensing spout as shown in the fi gure: - press the two buttons on the side to unlock it and lift it slightly; - pull the water dispensing spout to remove it. 1 2 2 slightly tilt the milk carafe. Insert it all the way into the g...

  • Page 37

    35 english 35 emptying the milk carafe 1 press the release buttons to allow the removal of the top of the carafe. 2 lift the top of the carafe. Empty the milk carafe and clean it properly. Note: after each use, clean the milk carafe as described in the “cleaning and maintenance” chapter..

  • Page 38

    36 english cappuccino brewing warning: danger of scalding! Dispensing may be preceded by short sprays of milk and steam. Danger of burns! Wait until the end of the cycle before removing the milk carafe. 1 fill the milk carafe with milk. The level must be between the minimum (min) and maximum (max) i...

  • Page 39

    37 english 37 5 press the " "button to start the dispensing. 7 the following icon is displayed during pre-heating time required by the machine. Y ello w 8 when the machine shows the following icon, the machine pours the milk. The pouring can be stopped by pressing the “ ” button. Gr een gr een gr ee...

  • Page 40

    38 english adjusting the cappuccino length each time the “ ” button is pressed, the machine pours a pre-set quantity of cappuccino into the cup. The machine allows you to adjust the amount of brewed cappuccino ac- cording to your taste and the size of your cups. 1 fill the milk carafe with milk and ...

  • Page 41

    39 english 39 latte macchiato brewing warning: danger of scalding! Dispensing may be preceded by short sprays of milk and steam. Danger of burns! Wait until the end of the cycle before removing the milk carafe. 1 fill the milk carafe with milk. The level must be between the minimum (min) and maximum...

  • Page 42

    40 english y ello w 7 the following icon is displayed during pre-heating time required by the machine. 8 when the machine shows the following icon, the machine pours the milk. The pouring can be stopped by pressing the “ ” button. Gr een gr een 9 once the milk froth has been poured, the machine brew...

  • Page 43

    41 english 41 adjusting the latte macchiato length each time the “ ” button is pressed, the machine pours a pre-set quantity of latte macchiato into the cup. The machine allows you to adjust the amount of brewed latte macchiato according to your taste and the size of your cups. 1 fill the milk caraf...

  • Page 44

    42 english making frothed milk warning: danger of scalding! Dispensing may be preceded by short sprays of milk and steam. Danger of burns! Wait until the end of the cycle before removing the milk carafe. 1 fill the milk carafe with milk. The level must be between the minimum (min) and maximum (max) ...

  • Page 45

    43 english 43 5 press the “ ” menu button. The following icon is displayed. Gr een gr een 6 press the “ ” button. The following icon is displayed. 7 press the “ ” button to select frothed milk. Y ello w 9 the following icon is displayed during pre-heating time required by the machine. Gr een 10 the ...

  • Page 46

    44 english adjusting the frothed milk length each time this function is selected, the machine pours a pre-set amount of frothed milk into the cup. The machine allows you to adjust the amount of frothed milk according to your taste and the size of your cups. 1 fill the milk carafe with milk and insta...

  • Page 47

    45 english 45 gr een 7 the following icon is displayed during pre-heating time required by the machine. 8 when the desired amount of frothed milk is reached, press the “ ” button. Now the “frothed milk” button is programmed. Every time it is pressed, the machine will brew the same amount of frothed ...

  • Page 48

    46 english 3 place a container under the hot water dispensing spout. 4 press the “ ” menu button. The following icon is displayed. 6 press the " "button to start the dispensing. 7 this icon is displayed. The machine reminds you to install the water dispensing spout. Check that the water dispensing s...

  • Page 49

    47 english 47 gr een y ello w 8 the following icon is displayed during pre-heating time required by the machine. 9 pour the desired amount of hot water. To stop the hot water dispens- ing process press the “ ” button. Cleaning and maintenance daily cleaning of the machine caution: timely cleaning an...

  • Page 50

    48 english 3 empty and clean the drip tray: - press the side buttons. - remove the drip tray. Note: empty the drip tray also when the full drip tray indicator is raised. 2 empty and clean the coff ee residues drawer located inside of the ma- chine. Open the service door, remove the drawer and empty ...

  • Page 51

    49 english 49 daily cleaning of the water tank 1 remove the small white fi lter or the intenza+ water fi lter (if installed) from the water tank and wash it with fresh water. 2 put the small white fi lter back or the intenza+ water fi lter (if installed) in its housing by gently pressing and turning...

  • Page 52

    50 english 6 pull the milk carafe dispenser to the left up to the “ ” icon. 4 remove the lid and fi ll the milk carafe up to the max level with fresh water. 5 put the lid back onto the milk carafe. 7 place a container under the dispensing spout. Gr een 8 press the “ ” menu button. The following icon...

  • Page 53

    51 english 51 10 the machine reminds you to insert the carafe and pull out the milk carafe dispenser. 9 press the “ ” button. The following icon is displayed. Press the “ ” button to select frothed milk. 11 the following icon is displayed during pre-heating time required by the machine. 12 once the ...

  • Page 54

    52 english weekly cleaning of the milk carafe the weekly cleaning is more thorough as it removes any milk residues from the dispenser. 1 press the release buttons and remove the top of the carafe. Weekly cleaning of the machine 1 clean the seat of the drip tray. 2 clean the pre-ground coff ee compar...

  • Page 55

    53 english 53 4 remove the suction tube (a). 5 remove the fi tting (b) from the milk frother by pulling it outwards. 6 detach the lid (c) from the milk carafe dispenser by pulling it down while slightly pressing on the sides. 7 further disassemble as shown in the image. A b c d 3 lift the milk caraf...

  • Page 56

    54 english 8 pull the fi tting (e) outwards from the milk frothing device. E 9 clean all the parts thoroughly with lukewarm water. Note: you can also clean these parts in the dishwasher. 10 reassemble the parts following the reverse order. Weekly cleaning of the brew group the brew group should be c...

  • Page 57

    55 english 55 4 to remove the brew group, press the «push» button and pull it by the handle. 5 thoroughly wash the brew group with fresh, lukewarm water and care- fully clean the upper fi lter. Caution: do not use detergent/soap to clean the brew group. 6 let the brew group air-dry thoroughly. 7 tho...

  • Page 58

    56 english 10 make sure the hook to lock the brew group is in the correct position by fi rmly pressing the “push” button until it locks into place. Check if the hook is at the top end position. If it is not, please try again. 11 insert the brew group in its seat again until it locks into place witho...

  • Page 59

    57 english 57 weekly cleaning of the coff ee bean hopper, the tray and the com- partment clean the coff ee bean hopper, the tray and the coff ee bean hopper com- partment once a week with a cloth to remove any coff ee residuals or dust. To remove the tray push the hooks on the bottom of the coff ee ...

  • Page 60

    58 english monthly cleaning of the milk carafe in the monthly cleaning cycle we recommend using the “saeco milk circuit cleaner” to keep the entire circuit clean of milk residues. You can purchase separately the “saeco milk circuit cleaner”. Please refer to the maintenance products page for further ...

  • Page 61

    59 english 59 9 once the machine stops dispensing water, repeat steps 5 - 8 until the carafe is emptied. Warning: never drink the solution dispensed during the procedure. Gr een 5 press the “ ” menu button. The following icon is displayed. Y ello w 8 the following icon is displayed during pre-heatin...

  • Page 62

    60 english 11 remove the milk carafe and the container from the machine. 12 rinse and fi ll the milk carafe with fresh water up to the max level. 13 insert the milk carafe into the machine. Pull the milk carafe dispenser to the left up to the “ ” icon. Place a container under the dispensing spout to...

  • Page 63

    61 english 61 y ello w 17 the following icon is displayed during pre-heating time required by the machine. 18 once the machine stops dispensing water, repeat steps 13 - 16 until the carafe is emptied. 19 remove the milk carafe and the container from the machine. Repeat steps 11 - 16 one more time. 2...

  • Page 64

    62 english 2 lubricate the shaft too. 3 insert the brew group in its seat until it locks into place (see “weekly cleaning of the brew group” chapter). Insert the coff ee residues drawer. 4 close the service door. Insert the coff ee grounds drawer. Monthly cleaning of the brew group with “coff ee oil...

  • Page 65

    63 english 63 1 place a container under the coff ee dispensing spout. 2 make sure the water tank is fi lled with fresh water up to the “max” level. 3 put a “coff ee oil remover” tablet in the pre-ground coff ee compart- ment. 4 press the “ ” button one or more times to select the pre-ground cof- fee...

  • Page 66

    64 english 8 let the solution take eff ect for approximately 15 minutes. Make sure you discard the dispensed water. 9 switch the power button on the back of the machine to “i”. To turn on the machine press the “ ” button. Wait until the automatic rinse cycle has been completed. 10 remove the coff ee...

  • Page 67

    65 english 65 y ello w descaling the descaling process takes approx. 35 minutes. Limescale builds up inside the machine during use. It needs to be removed regularly as it may clog the water and coff ee circuit of your machine. The machine tells you when descaling is needed. If the machine display sh...

  • Page 68

    66 english 2 insert the empty milk carafe. 3 remove the “intenza+” water fi lter from the water tank if it was in- stalled and replace it with the small white original one. Place the water tank back into the machine. 5 press the “ ” button. Press the “ ” button until the following display is shown. ...

  • Page 69

    67 english 67 10 pull the milk carafe dispenser to the left up to the " " icon. Place a large container (1.5 lt) under both the milk carafe dispenser and the dispensing spout. 11 press the “ ” button to start the descaling cycle. 12 the machine will start dispensing the descaling solution at interva...

  • Page 70

    68 english 19 when this icon is displayed, the water tank is empty. Repeat steps 14- 18. Then continue to step 20. 22 when the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displayed. Press the " " button to quit the descaling cycle. 18 press the ...

  • Page 71

    69 english 69 25 remove and empty the container 26 empty the drip tray and place it back. 27 the descaling cycle is now complete. 28 remove the small white water fi lter and place back the “intenza+” water fi lter into the water tank if it was installed. Note: at the end of the descaling cycle, wash...

  • Page 72

    70 english y ello w y ello w y ello w y ello w y ello w y ello w "intenza+" water filter this function allows you to manage the “intenza+” water fi lter. For more details, see the chapter related to fi lter handling. Descaling cycle this function allows you to run the descaling cycle. Timer (stand-b...

  • Page 73

    71 english 71 how to program your machine in this example, it is shown how to program the display contrast. Proceed in the same way to program the other functions. The programming menu can only be accessed when the machine is on and shows this display. Gr een 1 press the " " button to enter the menu...

  • Page 74

    72 english 5 press the “ ” and “ ” buttons to increase or decrease the value of the function. 6 when the display value is changed, the “ok” message appears. Press the “ ” button to confi rm the change. Y ello w 7 press the “ ” button to exit the programming menu. Note: the machine will automatically...

  • Page 75

    73 english 73 meaning of the display symbols this machine is equipped with a colour-coded system to make the user’s understanding of the display signals easier. The icons are colour-coded according to the traffi c light principle. Ready signals (green colour) the machine is ready to brew coff ee wit...

  • Page 76

    74 english ready signals (green colour) the machine is brewing two cups of coff ee. Coff ee brewing using pre-ground coff ee in progress. The machine is programming the amount of coff ee to brew. Frothed milk brewing. The machine is brewing cappuccino. The machine is programming the amount of milk t...

  • Page 77

    75 english 75 warning signals (yellow colour) the machine is heating up to brew beverages or dispense hot water. The machine is heating up during beverages programming. The machine is performing the rinse cycle. Wait until the machine has com- pleted the cycle. The machine needs the “intenza+” water...

  • Page 78

    76 english warning signals (red colour) close the service door. Fill the coff ee bean hopper. The brew group must be inserted into the machine. Insert the coff ee grounds drawer. Empty the coff ee grounds drawer and the coff ee residues drawer. Fully insert the coff ee grounds drawer before turning ...

  • Page 79

    77 english 77 troubleshooting this chapter summarizes the most common problems you could encoun- ter with your machine. If you are unable to solve the problem with the information below, visit www.Philips.Com/support for a list of frequently asked questions or contact the philips saeco hotline in yo...

  • Page 80

    78 english note: these problems can be considered normal if the coff ee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a self-adjusting operation as described in section "saeco adapting system". Machine actions causes solutions coff ee ...

  • Page 81

    79 english 79 energy saving stand-by the saeco full automatic espresso machine is designed for energy saving, as stated by the class a energy label. After 30 minutes of inactivity the machine turns off automatically (unless you have diff erently programmed the stand-by time). If a product has been b...

  • Page 82

    80 english technical specification the manufacturer reserves the right to make changes to the technical specifi cations of the product. Nominal voltage - power rating - power supply see label on the inside of the service door housing material abs - thermoplastic size (w x h x d) 256 x 350 x 470 mm w...

  • Page 83

    81 english 81 ordering maintenance products for cleaning and descaling, use saeco maintenance products only. You can purchase these at the philips online shop at www.Shop.Philips.Com/service, your local dealer or at authorised service centres. If you have any diffi culties obtaining maintenance prod...

  • Page 84

    82 english machine accessories - removable coff ee bean hopper ca6803 - maintenance kit ca 6706 - milk circuit cleaner ca6705.

  • Page 85

    83.

  • Page 88

    Www.Philips.Com/saeco the manufacturer reserves the right to make changes without prior notice. Rev.00 del 05-02-13 02 en 02.