Saeco RI9828/41 Operating And Maintenance Manual - Maintenance

27

MAINTENANCE

MAINTENANCE SETTINGS

In this menu, adjustments can be made to clean/maintain all the machine’s internal circuits. Press 

“maintenance settings” on the main menu.

This function enables the descaling cycle

(the machine indicates how many liters can be dispensed before descaling).

This function temporarily locks the touch screen (e.g. to clean the display). To 

reactivate the display, press “unlock” in the lower right-hand corner and then 

(within two seconds) “unlock” in the upper left-hand corner (this message 

appears only after pressing the previous icon).

This function shows how many beverages have been brewed for every single 

type of coffee since the last reset. 

This function enables the cleaning cycle of the brew group.

cleaning 

cycle

boiler 

descaling 

cycle

58

lock 

display

product 

counters

10

CLEANING CYCLE

This function cleans the machine’s internal circuits used for brewing coffee.

To rinse the brew group, simply clean with water as shown on page 33, on a regular basis. This tho-

rough cleaning cycle (below) completes the maintenance process of the brew group. We recommend 

carrying out this cycle on a monthly basis, or every 500 coffees, using Saeco cleaning tablets, which 

can be purchased separately.

Note: before performing this function make sure that:

1.  a large enough container is positioned under the spout;

2.  the appropriate tablet for cleaning the brew group has been inserted into the 

pre-ground bypass doser;

3.   the water tank is full.

THE CLEANING CYCLE CANNOT BE INTERRUPTED.

A PERSON MUST BE PRESENT DURING THE OPERATION.

1.4.2. cleaning cycle

no

Have you inserted the cleaning tablet 

and fi lled the water tank?

yes

After accessing the cleaning cycle 

menu, make sure that the cleaning 

tablet has been inserted as shown 

above.  Press “yes”.

Wait for the cleaning cycle to 

fi nish (approximately 4 minutes). 

The machine will return to the 

main menu.