Saeco ROYAL PROFESSIONAL SUP 016 E User's And Maintenance Booklet

Other manuals for ROYAL PROFESSIONAL SUP 016 E: User's And Maintenance Booklet, User's And Maintenance Booklet
Manual is about: Saeco RI9913/06

Summary of ROYAL PROFESSIONAL SUP 016 E

  • Page 1

    Household use only st amp at o su car ta ricicla ta. Nessun albero e' st at o abba ttut o per produrre quest o manuale cod. 0334.951 - ed.03 10/00 type sup 016 e we congratulate for having bought this top-quality espresso machine and thank you for choosing saeco. Before operating the machine, we rec...

  • Page 2

    3 5 11 13 23 19 15 16 28 25 17 18 21 20 22 14 10 12 24 7 aufheizen... 9 4 26 27 29 6 8 1 2 3.

  • Page 3

    4 5 43 1 2 3 4 5 6 7 1 2 3 4 5 6 7 47 1 2 3 4 5 6 7 48 46 44 1 2 3 4 5 6 7 51 1 2 3 4 5 6 7 45 1 2 3 4 5 6 7 50 49 41 42 52 - + 40 31 6 5 4 3 7 2 33 39 30 aufheizen... 37 34 32 35 36 38.

  • Page 4

    Description of symbols technical data 80 81 how to use the instructions these instructions cannot anticipate every possible use of the machine. For further information or questions concerning specific situations or problems, please contact the local dealer or manufacturer directly. The warning trian...

  • Page 5

    Safety rules 82 83 43 1 2 3 4 5 6 7 1 2 3 4 5 6 7 47 1 2 3 4 5 6 7 48 46 44 1 2 3 4 5 6 7 51 1 2 3 4 5 6 7 45 1 2 3 4 5 6 7 50 49 41 42 52 electrical parts should never be in contact with water: danger of short- circuit! Steam and hot water may cause burns. Never direct steam or water jets towards t...

  • Page 6

    Machine controls and parts installation 85 86 ............................ ............................ ............................ Esc ............................ Ent warming up...... Unpacking/installation standard packing is strong enough to protect the machine during mail shipping. Keep this p...

  • Page 7

    Drainage / programming the machine 88 programming the machine 87 remove water tank (11) from the machine, remove its cover (12) and fill it with cold water (approx. 2.4l). A valve on the tank bottom prevents water from escaping. Before installing the water tank in the machine, make sure the coffee b...

  • Page 8

    89 programming the machine 90 programming the machine cup heating plate connection royal professional is equipped with a useful cup heating plate which can be disconnected, if required. Press keys to move the asterisk to item “cup heater”. Press ent to activate this function. The following message w...

  • Page 9

    Programming the machine programming the machine 91 92 by means of keys move the asterisk to item “vending” and select it through the ent key. From the displayed submenu it is possible to select one of the following items by means of the same keys . On the contrary, if the hot water selection key is ...

  • Page 10

    Recommendations brewing 94 93 ent a new value can be saved. On the contrary, by pressing esc the new value entering is stopped and, as a result, the former counter setting shall be considered. When the set limit has been reached, the coffee dispensing stops and the following two messages are display...

  • Page 11

    95 brewing 96 safety devices coffee quantity, according to the cup dimension. The desired quantity can be selected through the selection keys . The relevant messages will be displayed. To set the quantity of coffee to be dispensed, it is necessary to press the relevant selection key till the desired...

  • Page 12

    97 cleaning and maintenance operations cleaning and maintenance operations 98 key pressed till the desired amount is reached. Attention: cappuccino amount can only be programmed if the corresponding programming function is enabled (see page 87). 38 for cappuccino dispensing, fit suction pipe (26) of...

  • Page 13

    Descaling 99 45 clean the coffee beans container periodically; this operation should be accomplished by a qualified technician! Unplug the machine. Empty the coffee container and unloose the two fastening screws. Now, the container can be removed and cleaned. 46 carefully pull the adjustment lever u...

  • Page 14

    101 descaling 102 reset descaling message in programming function, by pressing keys , move the asterisk till the end of the line on the menu sign. Descal and confirm the selection with ent button. The following message will be displayed: "reset descaling " "no " by means of the same keys , it is pos...

  • Page 15

    Troubleshooting 103 brew unit miss. Brew unit block. Dregdrawer miss. Grinder blocked trouble no message is displayed the automatic coffee brewing does not start the automatic coffee brewing does not start water is dispensed instead of coffee steam and hot water are not dispensed coffee is dispensed...