Saey Altum Installation And Operation Manual - page 9
9
8. Packaging
Your first impressions are important to us! The packaging of your new stove offers
exceptional protection against damage. However the stove and its accessories can
still be damaged in transit.
So please check the stove for damage and missing components when you take
delivery of it. Notify your supplier immediately of any missing components and also
on the CMR document.
The packaging for your stove is harmless for the environment. The cardboard and the
plastic foil can be returned to the local waste facility for recycling.
The package includes:
- 1 Saey Altum appliance
- 1 handgrip
- 1 manual
If anything is missing, please inform your installer as soon as possible.
9. Installing the stove
All local regulations, including national and European standards must be followed
when the appliance is installed.
Only an appliance connected by a recognised installer guarantees compliance with
legislation on construction and fire prevention. This is certainly required for safe and
proper use of the stove.
The stove may only be installed on a floor with adequate load-bearing capacity. If the
floor is non-compliant, then steps will have to be taken to increase the load-bearing
capacity.
In order that the appliance can be installed level, its legs are fitted with adjustable
feet (levelling screws). If necessary, adjust these so that the appliance is installed as
level as possible.
9.1 The chimney
Before a stove is connected to a chimney connected is, the size and quality of
the chimney must be checked to ensure that they meet locally applicable
regulations. The measurements may need to be calculated.
The chimney must be cleaned yearly. This cleaning must take place in
compliance with local legislation in force.
English