SAF FreeMile User Manual

Page of 91

Download

Print this page

Bookmark us

Technical

Description and

User Guide

1 2 3 4 5 6 7 Next › »

Summary of FreeMile

Page 1
1 technical description and user guide.
Page 2: Table Of Contents
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 2 table of contents 1 overview ................................................................................................................................... 4 1.1 saf freem...
Page 3
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 3 4.6.2 dscp configuration ................................................................................................................................. 50 4.7 spanning tree ...
Page 4
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 4 proprietary notice the information presented in this guide is the property of saf tehnika, jsc. No part of this document may be reproduced or transmitted without proper permiss...
Page 5
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 5 1.2 saf freemile feature summary 1.2.1 main features • full outdoor solution • capacity: up to 100 mbps • channel bandwidth: 10 and 30 mhz • modulations: qpsk, 16qam, 32qam, 64...
Page 6
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 6 figure 1.2. Saf freemile full outdoor unit 1.3 radio parameters • saf freemile is a good example of latest achievements in modem and transceiver development, providing both exc...
Page 7
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 7 1.4.2 low power active repeater with saf freemile fodu extends network to non line‐of‐sight locations; ideal for crossing mountains and interconnecting ethernet networks; low p...
Page 8
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 8 1.5 technical specification technical specification frequency band and range 24ghz (24.05 – 24.25) 17ghz (17.1 – 17.3) erc 70/03e (100mhz offset) 24ghz (24.15 – 24.25) uk ofcom...
Page 9
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 9 channel plan 24 / 17 ghz nr. 10mhz channel 30mhz channel tx, rx (mhz) rx, tx (mhz) tx, rx (mhz) rx, tx (mhz) 1 24055/17105 24155/17205 2 24065/17115 24165/17215 24065/17115 241...
Page 10
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 10 – saf freemile‐24 for 24ghz freemile fodu – product number (z24fee01l): product number contains information of the band side (l, h) in which saf freemile fodu operates. – unit...
Page 11
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 11 2 configuration and management there are three ways to adjust and read settings and operation parameters of the saf freemile equipment: 1. Using web terminal connected to the ...
Page 12
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 12 2.2 web interface this section describes necessary functionalities of web interface. 2.2.1 10/100base‐t port the 10/100base‐t port is used to connect saf freemile to a pc or e...
Page 13
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 13 fig. 2.1 (1). Put rubber sealing inside the connector as shown. Fastening screw should be placed on the front part of connector. (!) note that locking pins of fastening screw ...
Page 14
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 14 figure 2.3. Local area connection properties 3) in the dialog box enter the following values (so that your pc is in the same subnet as default saf freemile addresses): figure ...
Page 15
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 15 2.2.4 power over ethernet injection you must have power over ethernet sourcing equipment to power‐up freemile and connect the laptop to saf freemile. It is possible to use pas...
Page 16
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 16 (!) it is important to know the side parameter of the fodu to which you want to connect; whether the factory settings are loaded in fodu. If low side ‐> ip: 192.168.205.10 if ...
Page 17
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 17 figure 2.9. Web interface ‐ main window of configured link (!) note that saf freemile utilizes both polarizations, and radios must be installed with 90 degrees offset regardin...
Page 18
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 18 figure 2.10. Web interface description – main window of configured link also, special marks are used: – entries highlighted in red indicate that specific parameters do not com...
Page 19
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 19 7. “save” button, which permanently saves configuration changes for the local side freemile fodu; 8. “save in local and remote” button, which permanently saves configuration c...
Page 20
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 20 2.2.8 initial configuration with web gui in order to perform initial configuration you will need a laptop with lan card, 2 category 5e ethernet cables and a power over etherne...
Page 21
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 21 the main parameters necessary for the initial configuration may be set also from ‘configuration wizard’ shown in figure 2.12. Figure 2.12. Starting configuration wizard. Initi...
Page 22
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 22 figure 2.14. Step 2. Defining ip address, mask and default gateway the third screen of the wizard is devoted to the radio and modem configuration. You can enable or disable th...
Page 23
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 23 figure 2.16. Step 4. Checking settings and executing configuration to verify the settings, you can go to ‘status’ or the main screen, which is the first option in the navigati...
Page 24
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 24 2.3 command line saf freemile equipment can be monitored and configured by using command line. This process is performed by entering the commands in cli available in advanced ...
Page 25
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 25 corresponding rx signal levels and led blinking pattern is represented on figure below: figure 2.18. Mode 2 and mode 3 rssi led patterns.
Page 26
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 26 3 main web gui sections 3.1 main page the main window in web gui is main page, which shows all main system parameters, and, in case of failure or any other problem, it tints a...
Page 27
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 27  rx quality bar with use of colors (red, orange, yellow, green) indicates current quality of the signal  modulation indicates which modulation mode is used. The same modulat...
Page 28
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 28 30. Modem configuration – allows choosing appropriate mode comprising channel bandwidth (10 or 30 mhz), capacity at maximum modulation and e1 or t1 channels. By default 30mhz ...
Page 29
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 29 reasons include incorrect interconnection of saf freemile radio and antenna (tx signal is being reflected from antenna tablet surface) or reflective surface nearby the install...
Page 30
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 30 5. Download pm log 15 minute interval ‐ allows save performance log file for 15 minutes intervals in separate txt files on your hard disk drive. Same functionality is availabl...
Page 31
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 31 4 detailed configuration in web graphic user interface configuration section in web interface allows customizing your system to suit your specific needs. 4.1 main configuratio...
Page 32
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 32 1. Modem configuration – allows choosing appropriate mode comprising channel bandwidth (10 or 30 mhz), capacity at maximum modulation and e1 or t1 channels. By default 30mhz /...
Page 33
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 33 an acm profile defines the link parameters (modulation) for a given range of the radial mse. The radial mse range of each profile defines the threshold for switching from one ...
Page 34
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 34 this example demonstrates how the new technology, based on an acm mechanism, can play a key role in the development of cost‐effective next‐generation wireless access networks,...
Page 35
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 35 4.2 system configuration the system configuration window provides the configuration of web access interface; allows changing system name, web data refresh time and system time...
Page 36
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 36 1. Guest – enter new password (length: 4..30 characters) – allows entering preferable ‘guest’ account password and enabling the account. By default guest account is disabled. ...
Page 37
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 37 4.2.3 other configuration figure 4.9. Other configuration 1. Web refresh (2 .. 60 sec) – allows specifying time interval of web data refreshing. The default value is 5 seconds...
Page 38
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 38 4.2.4 upgrade software figure 4.10. Upgrade software 1. Choose file – allows choosing location of software upgrade file (e.G. Cfipz163.Elf.Ezip,ec) stored on your hard disk. S...
Page 39
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 39 advanced ethernet information page”) allows you to save advanced ethernet statistics page in separate txt file on your hard disk drive; 3. System returned ‐ in case of error o...
Page 40
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 40 1. Ftp service – starts ftp service for file access and software update of your freemile fodu. By default ftp service is not running (command line – net start ftp); 2. Tftp se...
Page 41
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 41 below is the explanation of the procedure of network ip configuration in case of network ip class area change. For the purpose of illustration, we use b class ip network addre...
Page 42
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 42 press “execute configuration”. 3) in “ms windows” go to “control panel  network connections”. In lan “properties” find “internet protocol tcp/ip” and click on its “properties...
Page 43
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 43 5. Flow control – shows if ‘flow control’ is enabled or disabled for each port; 6. Rx – shows if regress activity is allowed on mng port; 7. Tx – shows if egress activity is a...
Page 44
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 44 figure 4.20. Vlan configuration 1. 802.1q vlan – shows if support of 802.1q vlan is enabled (command line – ethernet vlan); 2. Management vlan id – allows specifying managemen...
Page 45
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 45 4.5.1 ethernet switch port status and settings figure 4.21. Interconnection of internal switches switch port 1 (lan) is connected to lan interface. Switch port 2 (wan) is conn...
Page 46
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 46 4.5.3 ethernet switch vlan status and settings figure 4.23. System without vlans when vlans are not used (figure 4.23), user data and management data are not separated either ...
Page 47
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 47 figure 4.25. Vlans and ports membership port 1 and port 2 of switch 1 and switch 2 are sending data according to vlan id and destination address, and adding vlan tags for pack...
Page 48
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 48 vlan a is the access type vlan with ports 1 & 2 membership with removing and inserting vlan tags while packet is being transmitted to ports 1 and 2, respectively. Vlan b is th...
Page 49
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 49 figure 4.28. Vlan configuration with ‘access’ vlan 4.6 qos saf freemile fodu priority queuing uses fixed queuing mode, in which highest priority buffer (q4) will pass packets ...
Page 50
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 50 figure 4.30. Qos 802.1p configuration 1. Qos 802.1p – enables or disables 802.1p priorities for all three ports – lan, wan and mng (command line – ethernet qos 802.1p {[enable...
Page 52
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 52 4.7 spanning tree configuration implementation of 802.1d‐2004 rstp (rapid spanning tree protocol) is backwards compatible with stp, as well as having additional capability for...
Page 53
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 53 - path cost (1..200000000) – this parameter setting depends on the capacity of a separate port; - state – port condition. Can be one of the following: disabled, blocking, list...
Page 54
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 54 13. Fwd transitions – displays how many times port has been changed to forward status; 14. Times since top chg – displays time since last topology change in hh:mm:ss; 15. Top ...
Page 55
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 55 4.8.2 snmp allowed hosts configuration figure 4.35. Snmp allowed hosts configuration 1. Snmp host list – shows the list of available snmp v1/v2 hosts; adds or deletes the host...
Page 56
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 56 5 performance and alarm management 5.1 alarm management 5.1.1 alarms and events structure all alarms and events are placed in indexed table. Low level raw alarms and events ar...
Page 57
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 57 14 12 3,3v failure power supply voltage out of defined range 15 12 5,5v failure power supply voltage out of defined range 16 13 no data from radio no data from radio (for futu...
Page 58
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 58 you also have fast access to alarm filtering, where it is possible to choose which alarm id you are willing to search among all log entries. To configure detailed and permanen...
Page 59
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 59 figure 5.3. Alarm configuration window alarm threshold configuration screen allows you to define specific threshold levels to bound alarms to desirable values, so that you are...
Page 60
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 60 figure 5.4. Alarm threshold configuration window 5.1.5 alarm management commands to manage alarms in command prompt, the commands are as follows: alarm management commands com...
Page 61
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 61 5.2 performance management the main aim of the performance management is to register mostly critical device performance event values in predefined time intervals. 5.2.1 perfor...
Page 62
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 62 figure 5.5. Functional architecture for data collection, history and thresholding treatment 5.2.2 performance values threshold seconds (ts) the ts is defined as one second per...
Page 63
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 63 figure 5.6. Performance log field selection figure 5.7. Performance log time interval can be chosen between 1 min, 15 min or 1 hr. You can also define the start time and the s...
Page 64
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 64 the main advantage in terms of demonstration means is obtained from ‘performance graphs’, which are found in ‘performance  performance graph’ section. You are able to choose ...
Page 65
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 65 9. Performance graph. Displays two performance parameters. Each parameter is shown with the minimum and maximum curves, which are in the same color. The curves in red have the...
Page 66
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 66 figure 5.12. Phase noise (qpsk) 4) amplitude compression causes the corner points to move towards the centre: figure 5.13. Amplitude compression (64qam) examples of saf freemi...
Page 67
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 67 figure 5.15. Saf freemile adaptive equalizer 5.2.6 equalizer graph equalizer graph window shows adaptive equalizer taps’ coefficients, which at a set time moment minimize mult...
Page 68
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 68 figure 5.17. Equalizer graph with compensating frequency response curve.
Page 69
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 69 5.2.7 performance management commands it is also possible to view performance log in command prompt. The list of available commands is the following: 5.3 ethernet modem statis...
Page 70
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 70 1. Shows time period during which statistics have been gathered; 2. Modem state – shows if the modem is operating correctly; 3. Clear statistics – resets all statistics counte...
Page 71
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 71 36. Non‐exc. Defers – packets deferred for at least one attempt, but less than an excessive defer; 37. Broadcasts – packets, which destination address contained broadcast addr...
Page 72
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 72 figure 5.19. Ethernet switch statistics 1. Shows the time during which statistics have been gathered; 2. Clear statistics – resets all statistics counters (not available for “...
Page 73
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 73 17. Rx64octets – total rx packets (bad packets included) that were 64 octets in length; 18. Rx65to127octets – total rx packets (bad packets included) that are between 65 and 1...
Page 74
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 74 6 miscellaneous controls in web graphic user interface these controls are located in the navigation panel under the “tools” item. 6.1 configuration file this section describes...
Page 75
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 75 figure 6.1. Configuration file 1. Download cfg file – allows downloading system configuration file and saving it on your hard drive. 2. Upload configuration file ‐ allows uplo...
Page 76
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 76 8. Input file name to backup cfg in system memory – allows choosing file name under which currently running system configuration file will be saved in the cfip flash memory (c...
Page 77
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 77 figure 6.2. Command management 6.3 file system the software used by the saf freemile management controller is organized in files, which are stored on flash disk. Firmware and ...
Page 78
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 78 configuration backup files using ‘cfg backup ’ command, the user can create the backup file of the current saf freemile configuration. The configuration backup file is a text ...
Page 79
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 79 ‘ access set [plaintext]’ command. Take note of upper case and lower case type: it should be taken into account for the password! The passwords may contain spaces; if using sp...
Page 80
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 80 7 saf freemile fodu discovery protocol discovery protocol is layer 3 network protocol. This feature allows gathering information from reachable saf freemile devices. The proto...
Page 81
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 81 7.2 discovery protocol performance examples 7.2.1 discovery of ip address and firmware version in case the subnet of saf freemile fodu is unknown for this purpose the command ...
Page 82
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 82 7.2.2 discovery of ip address and firmware version in case the subnet of saf freemile unit is known for this purpose the command “dp scan ” should be executed in ‘cmd’. Instea...
Page 83
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 83 7.2.3 discovery of ip address and firmware version of remote saf freemile fodu connected to router in case one ip address of remote units is known for this purpose the command...
Page 84
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 84 8 upgrading software to simplify the software update process, saf tehnika provides special update package, as a new version is available. This update pack is available as arch...
Page 85
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 85 – run ‘send.205.Xx.Cmd’ to perform update, where „xx” represents last number of actual saf freemile ip address. In case the memory is full, upload will halt and error message ...
Page 86
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 86 ‘ec’ – file attribute flags ‘e’ and ‘c’; the attribute flags are separated from file name or source with comma (only comma and no space) and there are no commas or spaces betw...
Page 87
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 87 4. Enter the command “type binary” to make sure the binary transfer mode is selected. 5. Use command “send , ” to upload files to saf freemile flash disk. For example: send c:...
Page 88
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 88 9 pinouts 9.1 sealed rj45 sockets one rj45 socket of freemile interface is for ethernet data transfer and power supply, the second one is for 2xe1 data transfer and for rssi. ...
Page 89
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 89 10 available accessories poe injector & surge protector p/n i0atpi04 grounding cable p/n z0akg001 fodu rj45 connector 8p shield solid p/n foacnr02 case for rj‐45 connector p/n...
Page 90
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 90 11 list of abbreviations 3g – third generation ac – alternating current aci – adjacent‐channel interference acm – adaptive coding and modulation agc – automatic gain control a...
Page 91
The saf freemile series full outdoor unit technical description and configuration guide • rev. 1.3 © saf tehnika jsc 2012 91 qpsk ‐ quadrature phase‐shift keying ram – random access memory rsl – received signal level rssi – received signal strength indicator rstp – rapid spanning tree protocol rx – ...