SAFARI Montage Endpoint G1615 Manual - page 6

1.1 

Important Safety and Operating Environment Considerations

Follow these important safety guidelines when installing and using your SAFARI 

Montage Endpoint:

1.  Read all instructions, heed all warnings herein and install according to all  

manufacturer’s instructions.

2.  Do not use this product near water.

3.  Allow for adequate ventilation to maintain normal operating temperature. Do not block 

ventilation openings, position the product in an enclosed space that would restrict airflow 

around the unit, place anything on top of the product or place the product on top of another 

heat-producing device.

4.  Do not install near any heat sources, such as radiators, heat registers or any other apparatus 

(including amplifiers) that produces heat. If the device has been in a cold environment, allow it 

to warm to room temperature for at least two hours before connecting it to a power source.

5.  Install the product securely to prevent damage.

6.  Use only the power supply provided with the product. The use of any other power supply 

may cause damage and void the warranty. Do not defeat the safety purpose of the polarized 

or grounding-type plug provided with the product. A polarized plug has two blades and a 

third grounding prong. The wide-blade and the third prong is provided for your safety. If 

the provided plug does not fit your outlet, consult an electrician for replacement of the 

obsolete outlet. 

7.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience 

receptacles and the point where they exit from the product.

8.  Read and follow all safety instructions in this user manual related to the included remote 

control, including but not limited to the use of batteries within the remote control.

9.  Disconnect this product from the power supply before cleaning, clean with a dry cloth only and 

do not use any cleaning agents or solvents.

10.  Only use the attachments and accessories specified by the manufacturer.

11.  Unplug this product during lightning storms or when unused for long periods of time.

12.  The endpoint must be placed at a distance of at least 10 cm from other equipment that may 

cause electromagnetic interference, such as TV sets or video recorders.

13.  The endpoint can be operated at an ambient temperature of 0°C to +35°C and at a relative 

humidity of 10% to 70% (non-condensing).

14.  The SAFARI Montage endpoint must be installed in accordance with SAFARI Montage’s 

warranty terms with properly conditioned power and surge protection.

15.  All servicing of the endpoint must be referred to SAFARI Montage in accordance with any 

applicable warranty.